15SEAT Leon (05-) Audi R8-style LED DRL Projector Head Lights - Chrome (RHD Only) | Performance Lights.co.uk£0£200/SEAT+Leon+(05-)+Audi+R8-style+LED+DRL+Projector+Head+Lights+-+Chrome+(RHD+Only)+%7C+Performance+Lights.co.uk?
15 results for "SEAT Leon (05-) Audi R8-style LED DRL Projector Head Lights - Chrome (RHD Only) | Performance Lights.co.uk" between £0 and £200
If the original lights have electric height adjustment the motors must be removed and transferred to the new lights. The pivots for manual adjustment on the new lights must be removed to fit the motors. Wiring & connector for motor in harness.
If the original lights have electric height adjustment the motors must be removed and transferred to the new lights. The pivots for manual adjustment on the new lights must be removed to fit the motors.
The wiring for the DRL LEDs terminates in a connector that must be plugged in to the car's existing sidelight bulbholder in place of the bulb. Check polarity - if DRLs don't light up with sidelights on, remove connector, turn 180 degrees & reinsert.
If the original lights have electric height adjustment the motors must be transferred to the new lights. Undo four screws & remove rear panel so manual adjustment pivot can be removed to fit the motor; motor wiring is provided inside panel.
If the original lights have electric height adjustment the motors must be removed and transferred to the new lights. The pivots for manual adjustment on the new lights must be removed to fit the motors.
The wiring for the DRL LEDs terminates in a connector that must be plugged in to the car's existing sidelight bulbholder in place of the bulb. Check polarity - if DRLs don't light up with sidelights on, remove connector, turn 180 degrees & reinsert.
If the original lights have electric height adjustment the motors must be removed and transferred to the new lights. The pivots for manual adjustment on the new lights must be removed to fit the motors. Wiring & connector is in harness.
If the original lights have electric height adjustment the motors must be removed and transferred to the new lights. The pivots for manual adjustment on the new lights must be removed to fit the motors. Wiring & connector is provided for the motor.
The wiring for the DRL LEDs terminates in a connector that must be plugged in to the car's existing sidelight bulbholder in place of the bulb. Check polarity - if DRLs don't light up with sidelights on, remove connector, turn 180 degrees & reinsert.
Suitable as a replacement for cars without electric height adjustment. Can be fitted to models with electric height adjustment, but this function will be lost - this will not cause an MOT failure as it is not a legal requirement.
Wiring up angel eyes & LED sidelights: Connect all loose white wires from the resistor boxes to the loose white wire at the large connector in headlight wiring harness; insulate joint. Repeat for loose black wires.
Suitable for cars with twin reflector headlights. Can be fitted to base models with single reflector (H4) headlights, but wiring will need to be adapted. For safety reasons headlights should be fitted and adjusted by a professional
Wiring up angel eyes & LED sidelights (if fitted): Connect all loose black wires to one of the THICK black wires in the headlight harness; insulate joint. Connect all loose red wires to the white wire in the harness; insulate joint.
Wiring up angel eyes & LED sidelights (if fitted): Connect all loose black wires to one of the THICK black wires in the harness; insulate joint. Connect all loose red wires to the white wire in the harness; insulate joint. Wiring u
(UK)
