12" Cranked Heavy Gate Hinges : 8 results priced between £5.00 and £75.00

For 900mm wide garden gates one would normally use 15" or 18" T hinges. Hook and band and heavy reversible hinges are heavier weight hinges for heavier gates. You may prefer the more commonly used galvanised and zinc coated hinges, these are shown below.

This listing is for a pair of 12" (305mm) galvanised cranked hook and band complete with screwss and bolts. Ring 01269 832535/email us for further information or postal rates.

Available in Epoxy Black or Hot Speler Galvanised finishes and sizes ranging from 12" to 36" and supplied in pairs with all fixings.

This is a face fix pull handle. A face fix fitting is where the pull handle is screwed to the face of the door. A cranked pull handle is designed to take the grip away from the door edge to avoid injury to the hand or fingers. Because these types of pull handle are only surface fixed using woodscrews it would not be advisable to fit them to heavy duty doors or doors that are going to be subject to heavy traffic.

Screws and coach bolts are not supplied with this item and need to be purchased separately, please see our fixings section. All of the above hinges take a size 12 wood screw. The 12in and 16in hinges require a 10mm coach bolt and the 18in, 24in and 30in require a 12mm coach bolt. Two packets of 10 screws would be sufficient to fix the pair of hinges.

Compound action, straight cutting moulded handle shears. Blade has a cutting capacity of 79mm / 3⅛". Suitable for use with mild steel.

12" Galvanised, double strap gate hinge Set-75mm. Complete Set. Comes …

Oil rubbed solid bronze hinges, supplied in pairs. Available in 12" (304mm x 102mm) or 18" (457mm x 102mm) sizes.