360 Pir Occupancy Detector Sensor Light Switch Ceiling : 17 results priced between £10.00 and £100.00

PIR Presence Detector / Occupancy Sensor Switch. Indoor Use Only. Voltage: 240 Volts. Time Setting: 10 seconds – 7 minutes. Maximum Load: 1200w Incandescent / 300w Fluorescent. Measurements: Height 71mm (overall) / 15mm (protruding) x Diameter 74mm. Cut Out Hole Size: 60mm. Detection Range: 6m (when installed at a max height of 4m). Detection Angle: 360 Degrees. Free Delivery – Ref number 16722.

Polycarbonate. One fitting for surface or recessed mounting. Features: IP20; 10m Detection Range; 6m Occupancy Sensor Range; Dusk Control; Adjustable Time On; Manual Override; For Indoor Use. Specifications: 230/240V. IP20 for indoor use only. Switching capacity: max. 2000W incandescent and 1000W fluorescent. Fixings included.

LUB1001 Features: -False ceiling occupancy detector.-White colour.-Designer: Bruck.-Manually controllable occupancy detector.-Adjustable time and photocell.-One switching channel.-Special version with spring clamps.-Integrated acoustics sensor (micro version).-Conduit box: 25mm.-Circular detection area: 360 degree.-Seated range: 5m.-Walking across range: 10 m.-Walking towards range: 6m.-Time settings: 30 sec - 30 min or impulse.-Photo electric switch: 10 - 2000 Lux.-Ambient temperature: -25 degree...

360º ceiling surface mount PIR presence detector. 6m diameter (3m radius) detection range at 2.5m mounting height. No creep zone – maximum coverage. Light ON time adjustable from 5 seconds to 18 minutes. Manual ON/OFF override. IP44 weatherproof rating (also suitable for outdoor use). Adjustable light level control. Total PIR switching: 2000W (e.g. 20x 100W GLS) incandescent or halogen, 500W fluorescent/low energy. Not suitable for discharge lighting. 75W fan. Part No. SLW360.

PIR sensor 360 degree x 14m 2000w

360 degree view super ceiling sensor with triple overlapping coverage for super sensitivity. No extra wires to run or extra boxes to install. Covers 2152 square feet at 9-ft height. Features: Finish: White Voltage: 120V Easy Installation: Relay and sensor all in one reduces installation cost. Compatible with most dimmers and electronci ballasts. Not compatible with instant start ballasts. LED testing and operation indicator Maximum Reliability: Adjustable detector sensitivity for...

Manufacturer: Schneider Electric

USE Modern ventilation and lighting systems are controlled by using occupancy sensors in connection with the HVAC system. The occupancy sensor LA 14 can be flush - or surface mounted on the ceiling or wall. The sensor LA 14 may include (optional) a passive temperature sensor (Pt100, Pt1000, NTC…, Ni1000, Ni1000-LG) and required terminals. FUNCTION The LA 14 has two function modes; occupancy sensor (occupied, S4= on) and movement detector (movement, S4= off). When the LA14 operates as a occupancy...

The Steinel IS-D3360 ceiling sensor is a flush mounting version of our popular IS 3360 sensor. The ISD3360 features three highly sensitive infrared detectors positioned at an angle of 120° to each other. With 1416 switching zones on 11 detection levels, they permit reliable, unrestricted coverage of areas as large as 1,000m². Equipped with an impressive set of electronics, this sensor is designed for professional use. It has a switching capacity of 2000 watts. Sensors connected in parallel are identified...

Light only when it is used. It automatically switches on when you enter or leave the area These smart light systems are controlled by ultramodern sensor technology. Invisible, hidden inside the lights, a high frequency sensor reacts to smallest movements and switches the light ON and again OFF Ideal for meeting the lighting requirements of corridors, party halls, stairways or guest WCs The sensor range is easily adjustable from 1 - 8 m The dim wave can be selected from 2 - 2000 lux. In addition...

The Autenco fl ush mounted PIR switch is suitable for easy mounting through a 73/75mm diameter hole into a ceiling void which is at least 95mm deep. Configurable for any room occupancy style, via Time and Lux level adjusters. It switches on the lighting load if the area is occupied and if the ambient lux level is less than the chosen adjusted level (10- to 1000 lux). It switches off the lighting load if the area is unoccupied for the set time (up to 40 minutes). It is also suitable for non lighting...

Infrared ceiling sensor. Ideal for uninterrupted, all-round detection under ceilings, porches, carports, soffits or balconies. Equipped with three highly sensitive infrared detectors positioned at a specific angle in relation to each other to provide reliable, uninterrupted allround protection of areas as large as 350 m2 beneath it. Detection zone can be limited by fitting the shrouds supplied. Simple adjustment of light ON time and twilight threshold by control dial. Maximum output: 1000W....

LUB1006_5528023 Features: -False ceiling occupancy detector.-Available in white or silver colour.-Designer: Bruck.-Special version with spring-clamps.-Adjustable time and photocell.-Remote controllers: IR-PD, IR-PD-Mini.-Conduit box: 25mm.-Detection area: 360 degree.-seated range: 5m.-walking across range: 10 m.-walking towards range: 6m.-Time settings: 15 sec. - 30 min. or impulse.-Photo electric switch: 20 - 1000 Lux.-Power supply: L165xB24xH24 mm.-Ambient temperature: -25 degree C +50 degree C...

PIR Motion Sensor Presence Detector Lamp Holder Converter. Indoor Use Only. Voltage: 240 Volts. Time Setting: 5 seconds – 100 seconds. E27 to E27 (requires an E27 bulb). Ambient Light: 3 – 2000 Lux (Adjustable). Detection Range: 6m. Detection Angle: 120 Degrees. Free Delivery – Ref number 16723.

Infrared ceiling sensor. Ideal for uninterrupted, all-round detection under ceilings, porches, carports, soffits or balconies. Equipped with three highly sensitive infrared detectors positioned at a specific angle in relation to each other to provide reliable, uninterrupted allround protection of areas as large as 350 m2 beneath it. Detection zone can be limited by fitting the shrouds supplied. Simple adjustment of light ON time and twilight threshold by control dial. Maximum output: 1000W....

LUB1003 Features: -False ceiling occupancy detector.-White colour.-Designer: Bruck.-Manually controllable occupancy detector.-Adjustable time and photocell.-One switching channel.-Special version with spring clamps.-Conduit box: 25mm.-24m Circular detection area: 360 degree.-Seated range: 7m.-Walking across range: 24 m.-Walking towards range: 8 m.-Time settings: 30 sec - 30 min or impulse.-Photo electric switch: 10 - 2000 Lux.-Ambient temperature: -25 degree C +50 degree C.-Housing: UV and shock...

Danlers ceiling mount PIRs designed for switching room lighting. Complete with 2m flexible cable. Sealed version is protected against light splashes and condensation when installed in the ceiling. ideal for shower rooms, bathrooms, etc.