ART X Direct professional active DI box : 7 results priced between £25.00 and £75.00

The Xdirect is a high quality interface that lets you connect instrument, line, or speaker level signals to a mixer or other balanced input. The high impedance single-ended 1/4 inch and XLR inputs are buffered and converted, by very low noise active electronics, into an isolated balanced low impedance signal source. The Xdirect has an extremely flat and wide frequency response and can handle high signal levels while still maintaining an isolated balanced low impedance output.

Frequency Response: 10Hz –100kHz, +/-.5dB @ +0dBu. Maximum Output Level: +6dBu (battery powered). +14dBu (phantom powered). Maximum Input Level: +4/+24/+44dBu. Dynamic Range: >100dB typical. Input Connections: 1/4” TRS and XLR female. unbalanced, 470k Ohm. Output Connection: XLR male balanced, <600 Ohm. THD: <.05% Typical. Filter Type/Response: Switchable, Low Pass, -3dB @ 30kHz. Input Attenuation: Switchable, (0dB, -20dB, -40dB). Output Phase: Switchable, Normal/Invert. Ground Lift:...

Fully active design. Phantom voltage or 9V battery powered. Converts high-impedance balanced / unbalanced inputs into 600 Ohm balanced outputs. Switchable input attenuation (0, -30 dB). Switchable ground lift. 1/4" TRS / XLR combo connector inputs. XLR connectors for balanced outputs. Rugged extruded aluminum case.

Model Specification Related Items Customer Reviews This gives the Xdirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments. The X-Direct active circuitry is powered by an internal 9volt battery, when external power is not available. In this mode it draws 3.5 ma which should give you more than 250 hours of operation off of a new battery. If phantom power is available, then the Xdirect will automatically draw its power from...

ART Pro Audio: Products DUALXDirect - Dual Professional Active Direct Box.

Art X- Direct Active DI box The Art X- Direct Active DI box is a high quality interface that lets you connect instrument, line, or speaker level signals to a mixer or other balanced input. The high impedance single-ended 1/4'' and XLR inputs are buffered and converted, by very low noise active electronics, into an isolated balanced low impedance signal source. The Xdirect has an extremely flat and wide frequency response and can handle high signal levels while still maintaining an isolated balanced...

Fully active design. Phantom voltage or 9V battery powered. Converts high-impedance balanced / unbalanced inputs into 600 Ohm balanced outputs. Switchable input attenuation (0, -30 dB). Switchable ground lift. 1/4" TRS / XLR combo connector inputs. XLR connectors for balanced outputs. Rugged extruded aluminum case. Frequency Response: 10 Hz - 100 kHz, +/- 0.5 dB @ +0 dBu. THD: <.05% (typical). Dynamic Range: >100 dB (typical). Channel Separation: > 80 dB (typical). Maximum Input Level...