Aquacomputer : 268 results priced between £5.00 and £150.00

Replacement bezel for an aquaero 5 XT. The aquaero 5 XT ships with a stainless steel bezel, using this black anodized aluminum bezel, the aquaero perfectly matches any black PC case.

Combined GPU/RAM/VRM water block for graphics card of the GeForce GTX690 series with 4096MB of VRAM in reference design. This water block combines the functionality of a GPU water block as well as RAM and VRM waterblock in one elegant and thin waterblock.The aquagraFX for GTX 690 boasts exceptional performance in regard to both cooling and flow rates. To pay tribute to the more and more complicated graphics card designs, we have now integrated spacers on all threads for maximum safety and ease of...

Already visible in the pictures is of much greater good sized heatsinks compared to its predecessor. Security has also been improved by a two-stage overload protection function that relies on high temperatures before the performance to 100% in order to reduce the power loss on the Platuine and with further increasing temperature the output is disabled to prevent damage to the board. Various alarm settings in terms of temperature, flow and speed signal to give you more options at hand to protect your...

After GeForce GTX 680 and GTX 690 NVIDIA makes Kepler-chip "GK104" on the GTX 670 to play his muscles. Compared to the GTX 680, GeForce GTX 670 with reference clock speeds - means about ten percent slower on the graphics computation, but what the hell is still a lot of power - depending on the scenario! For the single-GPU race cars, the German company offers aqua computer now at a high-quality water coolers. This once again represents the current state of development. Even when installing aqua...

Replacement faceplate for the aquabay AT. The aquabay itself is always shipped with a stainless steel faceplate, with the use of this faceplate it fits perfectly to any silver PC case. The aquabay itself must be ordered separately. This is only the faceplate with laser engraving.

Full colour lighting module for connection to the LED socket of the aquaero 5. The lighting module is based on an ultra-bright RGB (Red, Green, Blue) LED which can be adressed on all 3 fundamental colours individually.

Mounted on an aquaero 5 controller, this water block improves the heat dissipation and thereby significantly increases the maximum power output of the fan channels.

It has been specifically designed for the requirements of PC watercooling systems which use often mixed materials like copper and alumnium.The electric conductivity has been reduced to an minimum. The active ingredients also reduce the appearance of bubbles in the cooling fluid and optimizes the heat transfer between the surfaces and the fluid making it ideal for use in watercooling systems. DP Ultra is a clear and virtually odor free water based solution. DP Ultra is directly applicable. We recommend...

Front faceplate for the Aquaero. The Aquaero is delivered with a stainless steel front faceplate, but this allows you to change it for a Silver one to match a Silver case.

Replacement front panel for aquadrive. The aquadrive itself is always supplied with stainless steel front panel, by using this panel fits the aqua-drive bezel and optical black perfect for any PC.

Already clearly visible in the pictures is the much larger heat sinks compared to its predecessor. Security has also been enhanced by a two-stage overload protection function at high temperatures is only the power to 100% in order to reduce the power dissipation on the Platuine and when the temperature rises further disables the output to prevent damage to the circuit board. Various alarm settings for temperature, flow and speed signal will give you more options on hand to protect your system from...

The main body of the aquagrafx GTX470 is made from a solid piece of copper with a CNC mill. The channel depth was further increased for maximum flow, the cooling plate now has a thickness of 11mm and has a very fine channel structure in the GPU area (0.3mm). To pay tribute to the more and more complicated graphics card designs we have now integrated spacers on all threads for maximum safety and ease of installation. The contact surface for GPU and RAM is polished to a mirror finish for optimum contact...

The multiswitch is the ultimate controlling unit for your PC. It gets connected to your PC about USB and can be controlled over the enclosed aquasuite software or direct at the device. Its 8 main channels are able to switch electrical powers of 1A. E.g. you can can use it for the control of fans or cold cathodes. Besides the pure on/off turning it is also possible to dim these channels at the use of cold cathodes in 26 stages. Besides the 8 main channels another switching output with a potential...

It has been specifically designed for the requirements of PC watercooling systems which use often mixed materials like copper and alumnium.The electric conductivity has been reduced to an minimum. The active ingredients also reduce the appearance of bubbles in the cooling fluid and optimizes the heat transfer between the surfaces and the fluid making it ideal for use in watercooling systems. DP Ultra is a clear and virtually odor free water based solution. DP Ultra is directly applicable. We recommend...

It has been specifically designed for the requirements of PC watercooling systems which use often mixed materials like copper and alumnium.The electric conductivity has been reduced to an minimum. The active ingredients also reduce the appearance of bubbles in the cooling fluid and optimizes the heat transfer between the surfaces and the fluid making it ideal for use in watercooling systems. DP Ultra is a clear and virtually odor free water based solution. DP Ultra is directly applicable. We recommend...

It has been specifically designed for the requirements of PC watercooling systems which use often mixed materials like copper and alumnium.The electric conductivity has been reduced to an minimum. The active ingredients also reduce the appearance of bubbles in the cooling fluid and optimizes the heat transfer between the surfaces and the fluid making it ideal for use in watercooling systems. DP Ultra is a clear and virtually odor free water based solution. DP Ultra is directly applicable. We recommend...

All are equipped with threaded mounting spacers, this allows the graphics card is not forgiven more practical and installation is easy. The contact surfaces for the GPU and RAM are polished for optimal contact. Included is a high-end thermal pad for the voltage regulator area. The cooler is equipped with the GTX 480/470/460 aquagraFX for well-known port terminal made of Delrin. This is fixed from the side with 3 mounting screws and provides the opportunity to screw terminals on both sides. Corresponding...

Machined from solid aluminum, it can also be mounted to a backplate aquagrafx GTX 680 cooler Waser, improving in particular the power distribution in the range of voltage regulators significantly. The back plate is black anodized and equipped with an embedded computer Aqua logo in brushed stainless steel. Materials: Back Plate: aluminum, black anodized Inserts: stainless steel, Delivery: backplate mounting hardware Note: supplied without graphics card and without aquagrafx water cooler!

For electrical isolation and protection of components on the underside of the mainboard spacers from plastic, and a full-sized rubber plate between the backplate and motherboard are mounted. Compatible with: cuplex kryos PRO cuplex kryos Delrin cuplex PRO cuplex XT and XT di cuplex (in XT and cuplex kryos cuplex kryos HF is the backplate included) Delivery: A stainless steel backplate An insulating rubber Plastic spacers four screws

Suitable for the following waterblocks: aquagratiX for HD 5970 . Please note that each GPU need its own backplate, hence two of these items are needed per card! aquagratix for HD 5870/5850 Haben sie Fragen zu ihrem Grafikartenlayout? Die Kollegen aus dem Hardwareluxx haben hier einen Sammelthread zusammengestellt. Extent of delivery: 1 Stainless steel backplate 4 plastic spacers 4 screws 3 foam rubber strips Please note: Waterblock and graphics card not included! Two backplates needed for a HD...

It has been specifically designed for the requirements of PC watercooling systems which use often mixed materials like copper and alumnium.The electric conductivity has been reduced to an minimum. The active ingredients also reduce the appearance of bubbles in the cooling fluid and optimizes the heat transfer between the surfaces and the fluid making it ideal for use in watercooling systems. DP Ultra is a clear and virtually odor free water based solution. DP Ultra is directly applicable. We recommend...

This connector allows the lateral or horizontal juxtaposition of "stacking" of radiators in the system modularity airplex The connector is made of nickel plated brass and equipped with two O-ring seals and can be plugged in without tools in each attachment hole of the radiators. Fixation is achieved by screwing the radiator with connecting plates to be purchased separately. The radiators lie flush against one another. By connecting several radiators can realize a variety of configurations and sizes...

The twinplex pro offers a great compromise between flow resistance and maximum cooling performance thanks to its micro-structure. Compatible hole spacings: approximately 79.5mm diagonal respectively 51mm/ 61mm horizontal/vertical (outer mounting points) Compatible with: Graphics card of the GTX460 series in reference design Extent of delivery: Assembled waterblock, mount with all required small parts Please note: The waterblock is shipped without fittings, please order suitable fittings separately...

Modular design waterblock for Chipset and graphics card with excellent properties. Just as with the cuplex only the highest-quality materials such as highly pure copper and Plexiglas GS are being used. The waterblock has an integrated gasket, the cooling plate has a finely milled cooling structure. Between copper plate and Plexi top plate a exchangeable stainless steel mounting plate is integrated. This modular design allows the waterblock in a multitude of applications. The twinplex pro offers...

The unique feature of this Fillport is the fact that it is equipped with two connection threads. This allows the simultaneous connection to the highest point of the reservoir (e.g. upper thread of an aquatube) and to a lower point of the loop by e.g. using a T-piece or a lower connection thread of the reservoir.

This temperature sensor is equipped with a G1/4" inner- and a G1/4" outer thread and can therefore be integrated easily even directly on a waterblock or radiator.

The aquagrafx GTX 480 is made from more than 2kg of copper with a CNC mill and reaches a weight of only 850g when finished. The cooling plate is 10mm thick and has a very fine channel structure in the GPU area (0.3mm). To pay tribute to the more and more complicated graphics card designs we have now integrated spacers on all threads for maximum safety and ease of installation. The contact surface for GPU and RAM is polished to a mirror finish for optimum contact and heat transfer. The VRM thermal...

This cooler combines the features of a graphics chip cooler and RAM-coolers in an elegant and very flat watercooler. Additionally the voltage regulators are also cooled effectively.

This cooler combines the features of a graphics chip cooler and RAM-coolers in an elegant and very flat watercooler. Additionally the voltage regulators are also cooled effectively.

This backplate is manufactured from massive aluminum and can be mounted in addition to a aquagrafx GTX 680 water block, giving additional stability especially in the voltage regulator area of the graphics card.

It has been specifically designed for the requirements of PC watercooling systems which use often mixed materials like copper and alumnium.The electric conductivity has been reduced to an minimum. The active ingredients also reduce the appearance of bubbles in the cooling fluid and optimizes the heat transfer between the surfaces and the fluid making it ideal for use in watercooling systems. DP Ultra is a clear and virtually odor free water based solution. DP Ultra is directly applicable. We recommend...

Graphics card: GeForce GTX 470, 1280MB GDDR5, 2x DVI, Mini-HDMI, PCIe 2.0 Waterblock: aquagraFX for GTX 470 (GF100) G1/4 (23495) The graphics card is shipped checked for functionality and with 6 months of warranty / 24 months of defects liability

Graphics card: GeForce GTX 580, 1536MB GDDR5, 2x DVI, Mini-HDMI, PCIe 2.0 Waterblock: aquagraFX for GTX 580 (GF110) G1/4 (12401) The graphics card is shipped checked for functionality and with 6 months of warranty / 24 months of defects liability

This product may currently have no product information or images stored online. Please contact us via our contact page.

Aquacomputer GeForce GTX 680, 2GB GDDR5 with Fitted aquagraFX for GTX 680