Arduino Duemilanove : 7 results priced between £10.00 and £25.00

Duemilanove is the enhanced release of Diecimila version. It adds to the previous new features (autoreset function, extended power connector, built in led, USB overcurrent protection) the automatic power selection.

Overview The Arduino Duemilanove ("2009") is a microcontroller board based on the ATmega328(datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. "Duemilanove" means 2009 in Italian...

Microcontroller ATmega1280. Operating Voltage 5V. Input Voltage (recommended) 7-12V. Input Voltage (limits) 6-20V. Digital I/O Pins 54 (of which 14 provide PWM output). Analog Input Pins 16. DC Current per I/O Pin 40 mA. DC Current for 3.3V Pin 50 mA. Flash Memory 128 KB of which 4 KB used by bootloader. SRAM 8 KB. EEPROM 4 KB. Clock Speed 16MHz.

NXShield-D attaches directly to an Arduino Duemilanove or Uno, It allows you to connect upto 4 NXT motors, and 4 NXT Sensors, and program for them through Arduino sketch.

Arduino Duemilanove / UNO Sensor Shield V4 Module USB Cable Description: Sensor Shield V4.0 allows you to connect to various modules like sensors, servos, relays, buttons, potentiometers Etc. Each functional module has buckled port with VCC, GND and Output, which has corresponding port on the Sensor Shield, connected with a plain 2.54mm dual-female cable you may start playing already. Buckled brick cables are like cement for bricks, make the connections easier, secure and more professional looking...

ATmega328 running at 16MHz external resonator. Select 'Arduino Duemilanove w/ 328' to get the delay functions to work correctly. USB connection off board. 5V regulator. Max 150mA output. Over current protected. Reverse polarity protected. DC input 5V up to 12V. Resettable fuse prevents damage to board in case of short. Power select switch acts as on/off switch.

An ATMega 328 Chip preloaded with the Arduino bootloader. This will allow you to upgrade your Arduino Duemilanove/Diecimiela 168, or add a handful of...