Chrome Gu10 Ip65 Bathroom Fire Rated Downlighter : 126 results priced between £5.00 and £50.00

Fit energy efficient GU10 LEDs into your home with ease thanks to the Twistlock system of this intelligently designed downlighter by DaxLite. The chrome exterior of this product makes it the ideal match to kitchens and bathrooms which typically feature this material.

Polished Chrome mains GU10 IP65 showerlight. Unbelievable value for money, these quality attractive IP65 rated downlights are designed for all bathroom and shower applications. Front bezel unscrews to facilitate easy lamp change. Toughened glass front. Requires 50W bulb max (not included).

Free bulbs (lamps) with every order, unless stated otherwise. Your order will be delivered using the following rates:. UK mainland only - Carrier rates for orders under £50 - £5.10 per order - FREE Delivery on orders over £50. UK (Orkney, Shetlands, Western Isles, Guernsey, Jersey, Sark) - £14.99 per order. Republic of Ireland and Northern Ireland - £14.99 per order. We will email you when your order has been dispatched.

Add a stunning series of spotlighting to your bathroom with this IP65 rated downlighter by DaxLite. This safe to use product has been tested to ensure your lighted investment stays fault free and stylish. Installing GU10 lamps is made simple with the Twistlock design and the chrome surround is an ideal match to bathroom fixtures.

Polished Chrome  Low Voltage Fixed Fire Rated Downlight. * Fire Tested and assessed for up to 90 minutes in accordance with the methodologies of BS 476: Parts 21 and 23: 1987. * Complies with the requirements of Hospital Regulation HTM81. * In the event of a fire, the intumescent material completely seals the downlighter. * Uses both types of lamp dichroic and aluminium, 50 watt maximum. * Maintains acoustic barrier. * Very easy to install. * Strong springs for better ceiling fit. * Springs are recessed...

Details This high quality GU10 Bathroom / Shower IP65 Rated fittings have been tested and fully comply with UK BS476 part 21, 23 and part C of the UK building regulations. The fittings are not only modern and attractive but are fully tested and Approved for 30, 60 and 90 minute fire ceilings and Approved for Acoustic Standards With years of experience you can trust purchasing from PowerstarLED as we invest significantly in quality and control to ensure we are sourcing the latest lighting technology...

IP65 Chrome shower MR16 fire rated die-cast downlighter. Especially designed for all bathroon and shower applications. IP65 rating. Die cast.

iCage Bathroom Downlight in Chrome - 50W (GU10/MR16) Die-Cast Shower IP65 Rated Downlight (Lamp not included)

Requires a 12v transformer which is not supplied - See related accessories at the bottom of the listing for more information.

An IP65 rated low voltage fire rated recessed bathroom downlight in a polished chrome finish. Suitable for use in bathroom zones 1. 2 & 3 subject to current U.K. wiring regulations. Class 3 SELV (separated or safety extra low voltage) Requires separate transformer and lamp, please see adjacent. This product may be suitable for dimming depending on the transformer used. Diameter: 85mm Height: 110mm Cut-out: 70mm Max wattage: 1 x 50W GU5.3 halogen (not included) IP rating: IP65 Dimensions are...

DETAILS DELIVERY RETURNS SECURITY Bathroom Zone: Suitable for bathroom zones 1, 2 and 3 Class: 3 Depth: 5mm Diameter: 85mm Dimmable: Yes Finish: Polished Chrome Glass Components: Yes IP Rating: IP 65 - Jet Proof Max Wattage: 1 x 50w GU5.3 - Not Included On/Off Switch or Pull Cord: No Transformer Included: No Transformer Required: 50vA 12vmm Q. What is Asco's delivery policy? A. Asco charge £5.95* for postage and packaging on all orders with no minimum order value. Goods are transported directly...

Saxby 240V Fire Rated Chrome Bathroom Downlight DLF805CG Mains volt IP65 fixed downlight with integrated intumescent material for fire protection of up to 90 minutes and also provides resistance to the passage of sound.  Suitable for zones 1, 2 and 3 in the bathroom. Specification 240volt IP65 rated Ventilated die cast body Easy twist and lock for simple lamp replacement Suitable for over shower usage Cut Out: 73 mm Minimum Void: 200 mm Diameter: 86 mm Lamp type: 1 x 50w GU10 lamp (included)

Brighten up your shower enclosure with a well-designed and modern looking showerlight. This one comes with an attractive chrome finished rim to fit with other silver products such as aluminium cabinets and chrome plated brassware you may have in your bathroom. This product is extremely efficient and comes with a 35W MR16 bulb included. It is 100 minutes fire rated, even without a firehood, so you can rest assured that the 72mm cutout required for installation is perfectly safe. Energy efficient showerlight...

HIB Chrome Low Energy Fire Rated Showerlight While we all understand the importance of safety when you bring together water and electricity, the HIB Chrome Low Energy Fire Rated Showerlight has an added feature. Even without the use of a fire hood, it still offers protection should there be a blaze. Hot Design Features This fire rated showerlight has been manufactured in such a way, that it offers all the aesthetics of a regular bathroom light, but without compromise. It has been tested to Part B...

LED Colour: Cool White/Warm White. Finish: Chrome. Beam Angle: 35°. IP Rating: IP65. Supplied with integral driver. Energy Consumption: 7W. Light Equivalent: 35W Halogen. Body Material: Pressed Steel. 240v, 50hz.

The super slim Chrome Fire Rated Shower Light is a flat round clear glass shower light with a sleek, contemporary style that's perfect for contemporary bathrooms. This light fitting is 100 minutes fire rated, providing you with added peace of mind. It requires a minimum recess space of 125mm. The Chrome Fire Rated Shower Light is compliant with EN60598-2-2:1996+A1:1997 and EN60598-1:2004.

Email to a Friend Product DescriptionComplete with transformer and 35w bulb Minimum recess space required 12.5 cm IP65 rated Cut out 66mm required Mr/16 12v bulb 35 watt maximum Suitable for use in zone 1, 2 or 3 Size: Width 8.6cm diameter x Depth: 0.4cm Colour: ChromeAvailability | See more HIB products | See more Bathroom Lighting

Surround your LED lighting with the Satin Silver finish of this high quality DaxLite downlighter. The eye-catching look of this fitting is ideal for modern interiors be it in the home or office. The DaxLite Fire Rated Tilt Downlighter With Satin Silver Bezel is compatible with GU10 spotlighting so will look the part in kitchens, bathrooms and hallways. Featuring a handy Twistlock system for non-fuss installation, your LEDs will be operating in no time so you can start saving on energy bills!

Photometrics: Beam Angle: 38° Life of LED: 70,000 Hours Lumens: NW-550, WW-470 Wattage: 8.5W Wiring: Drivers: 700mA LED Dimming Integral Dimmer Cable/Flying Lead: 150mm Type of Wiring Required: Parallel (Mains) Power Factor: 0.95 General: IP Rated: IP65 Bathroom Zone: 1 Construction Material: Steel/Aluminium Cut-Out: 100mm to 110mm Face Temperature when Lit: 40C Rotation: 360 SELV (Saftey Extra Low Voltage): Yes Tilt Angle: 20°+/- Warranty: 7 Years

Fire rated - meets part b of the building regulations. Low energy led illumination. Cool white - 580 lumens, 10w. Dimmable. 36° beam angle. IP65 - electrically safe for use in the bathroom. Easy to install. Size: Ø8.5 x D0.7cm.

A nicely lit showering atmosphere is one of the key factors that can contribute to your state of relaxation. This Chrome Showerlight offers a means for doing this which is safe: with a 100 minutes fire rating as well as an IP65 rating, making it suitable for use in the direct showering area in the bathroom (zone 1). The chrome finish on the showerlight gives a contemporary appearance which can be easily married with other silver bathroom additions such as aluminium cabinets or chrome plated brassware...

This design uses a heat sink (seen in the photographs) and this is a metal device that uses thermal contact to absorb and dissipate thermal energy from the lamp to a lower temperature object that has a much greater heat capacity. This process acts as a cooling mechanism because of thermal equilibrium. Simply put the heat sink takes the heat from the source and cools itself more quickly than the housing.

Polished Chrome Die-Cast Twist And Lock GU10 Adjustable Fire Rated Downlighter Kit c/w 50w Lamp. * Fire Tested and assessed for up to 90 minutes in accordance with the methodologies of BS 476: Parts 21 and 23: 1987. * Complies with the requirements of Hospital Regulation HTM81. * In the event of a fire, the intumescent material completely seals the downlighter. * All mains fittings have earth terminal. * Maintains acoustic barrier. * Very easy to install. * Strong springs for better ceiling fit....

The Seto Chrome 12v Round Fire Resistant Bathroom Downlight is IP65 Rated, and has a Chrome Finish BS476: part 21, 90 minute rated Chrome finish Requires a 50w MR16 lamp (For bulbs please see our Light Bulbs section or Related Products below) IP65 rated, suitable for bathroom zones 1 & 2 Class 3. Requires a 20-60W/VA transformer (please see Lighting Accessories or Related Products below) Dimmable Dimensions Diameter 100mm Cut-out 70mm – Recess 110mm

Polished chrome finish. Glass Cover. Fire Rated. Uses 1 x 50 watt MR16 lamp (not supplied). 12 Volt. Low voltage lighting transformer required. Diameter 85mm. Height 110mm. 70mm cutout required. Suitable for use in zones 1, 2 & 3 of the bathroom. IP65 rated. 12 months UK manufacturer guarantee.

Independently tested for 30, 60 & 90 minute fire rated ceilings. As simple to fit as a conventional downlighter as supplied with a 50W MR16 halogen lamp. Aluminium Construction. Full protection, no need for a firehood. Adjustable springs for different ceiling thicknesses. Compliant with Part B Building Regulations (fire safety). Compliant with Part E Building Regulations (Ressistance to passage of sound). Conforms to BS476:21. Available in white, brass, chrome and satin chrome to suit any...

Description Delivery details Returns Information In Polished chrome this fixed downlighter takes GU10 and is fire rated. Cut-out of 75mm overall diameter of 85mm Orders placed Monday to Friday before 2pm will generally be picked and packed for immediate despatch. Some products specify a longer delivery time in the product description (e.g. web specials). Please note that orders placed over the weekend or on public holidays will be processed on the next working day. Orders over £50 are delivered...

Our new IP65 Fire Rated Downlight fitting for use in bathrooms and above showers comes complete with a true 50w equivalent 400 Lumen LED GU10 from Crompton. Fitted with integrated intumescent material that completely seals the downlight and ceiling cut-out in the event of a fire. Tested in 30, 60 & 90 minute fire rated ceilings it complies with BS476 part 20, 21 & 23.

Precision engineering, rigorous QC procedures, and only the very best base parts and components are selected and combined with exceptional workmanship to create lighting of the finest quality. High technology, pioneering spirit and the quest for perfection are the basic elements of all Halers Lighting luminaries. Product code DL/CR/F/NW/DIM Bathroom zone 1 Beam angle 34° Colour temperature 4000° kelvin (neutral white) CRI (colour rendering index) 80 Cut-out Ø 60-70mm Dimensions Ø...

Chrome finish. Fire rated for 90 minutes. Uses 1 x 50 watt MR16 halogen lamp (not supplied). 12 volt. Transformer not included. Diameter 100mm. Overall recess depth 110mm. Cutout of 70mm required. IP65 rated. Suitable for use in zones 1,2 & 3 of the bathroom. Dimmable. 12 month manufacturer guarantee.

This seriously stylish Brushed Chrome Low Energy Fire Rated Shower Light has a contemporary spotlight design with brushed chrome finish and will look stunning in your bathroom. It provides crisp clear lighting with a CFL bulb, while keeping energy consumption low. Quality lighting is essential and this shower light has been fire rated above 100 minutes for extra peace of mind. It requires a minimum recess space of 15cm. The Brushed Chrome Low Energy Fire Rated Shower Light is compliant with EN60...

Polished Chrome. Round Glass Cover. 12 Volt. Dimensions Diameter 105mm Projection 11mm. Suitable for use in Zones 1, 2 & 3 of the bathroom. IP65 rated. Uses 1 x 50 watt GX5.3 lamp (not included). 65mm Cut out required. 12 month manufacturer guarantee.

Product Description The Greenbrook FR1002SGUC polished chrome 50W tilt GU10 mains voltage steel fire rated downlight is as simple to fit as a conventional downlighter and has been independently tested for 30, 60 & 90 minute fire rated ceilings. See PDF for full product dimensions & technical specification Steel construction with polished chrome finish Hole cut out: 89mm 50 watt GU10 halogen lamp supplied Independently tested for 30, 60 & 90 minute fire rated ceilings Adjustable springs for different...

Dia: 86mm. Depth: 110mm. Cutout: 72mm. Max Wattage: 1 x 50W. Suitable For Bathroom Zone 3. Lamp Type: 1 x GU10 (included).