Cisco 1000BASE-T SFP (Original) : 20 results priced between £100.00 and £3,000.00

The 1000BASE-T SFP operates on standard Category 5 unshielded twisted pair copper cabling of up to 100m (328 ft) link length. Cisco 1000BASE-T SFP modules support 10/100/1000 autonegotiation and Auto MDI/MDIX.

The Cisco industry-standard 1000BASE-T Small Form-factor Pluggable (SFP) gigabit interface converter (GBIC) is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. The Cisco SFP provides full-duplex Gigabit Ethernet connectivity to high-end workstations and between wiring closets over existing copper network infrastructure.

The industry-standard Cisco® Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. SFPs can be used and interchanged on a wide variety of Cisco products and can be intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis.

Cabling technology 1000BASE-T. Compliance industry standards IEEE 802.3z, IEEE 802.3ah. Connectivity technology Wired. Connector(s) RJ-45. Data transfer rate (max) 1000 Mbit/s. Dimensions (WxDxH) 13.4 x 56.5 x 8.5 mm. Hot-swap Y. Interface SFP. Maximum transfer distance 100 m. Operating temperature range (T-T) 23 - 185 °F. Safety Laser Class I 21CFR1040 LN#50 7/2001, Laser Class I IEC 60825-1. Source data-sheet ICEcat.biz. Weight 75 g.

The Cisco industry-standard 1000BASE-T Small Form-factor Pluggable (SFP) gigabit interface converter (GBIC) is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. The Cisco SFP provides full-duplex Gigabit Ethernet connectivity to high-end workstations and between wiring closets over existing copper network infrastructure.

When shorter distances of single-mode fiber (SMF) are used, it might be necessary to insert an inline optical attenuator in the link to avoid overloading the receiver. A 10-dB inline optical attenuator should be inserted between the fiber-optic cable plant and the receiving port on the SFP at each end of the link whenever the fiber-optic cable span loss is less than 8 dB.

The Cisco Nexus 2248TP-E Fabric Extender is a 1 Gigabit Ethernet fabric extender with enhancements that target workloads such as large-volume databases, distributed storage, and video editing. The Cisco Nexus 2248TP-E supports 48 100/1000BASE-T host facing ports and four 10 Gigabit Ethernet fabric interfaces.

1000BASE-SX SFP Transceiver Module - 1 1000BASE-SX SFP Transceiver Module - 1 - SFP

When shorter distances of single-mode fiber (SMF) are used, it might be necessary to insert an inline optical attenuator in the link to avoid overloading the receiver. A 10-dB inline optical attenuator should be inserted between the fiber-optic cable plant and the receiving port on the SFP at each end of the link whenever the fiber-optic cable span loss is less than 8 dB.

<p>The Cisco industry-standard Small Form-factor Pluggable SFP Gigabit Interface Converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. SFPs can be used and interchanged on a wide variety of Cisco products and can be intermixed in combinations of 1000BASE-SX, 1000BASE-LX/LH, or 1000BASE-ZX on a port-by-port basis.</p><p>T he GLC-ZX-SM, 1000BASE-ZX SFP operates on ordinary single-mode fibre optic link...

The GLC-ZX-SM, 1000BASE-ZX SFP operates on ordinary single-mode fiber optic link spans of up to 70 kilometers (km) in length. Link spans of up to 100 km are possible using premium single-mode fiber or dispersion-shifted single-mode fiber. The SFP provides an optical link budget of 23 dBùthe precise link span length will depend on multiple factors such as fiber quality, number of splices, and connectors. When shorter distances of single-mode fiber are used, it may be necessary to insert an inline...

You may also be interested in these Networking Network Cards items

Cisco Compatible SFP Transceiver Module QuickSpecs Technical Specifications 1000BASE-T Small Form-factor Pluggable (SFP). Standards based Gigabit Ethernet. 1.25 Gbit/sec line speed. Operating distance up to 100m on Category 5 copper wire. IEEE Standard 802.3. Industry-standard RJ-45 connector. Fully metallic enclosure for low EMI. Product Support Please see the Cisco Transceiver Modules Compatibility Matrix for support information. Safety Standards Compliance with Restriction on Hazardous Substances...

IEEE 802,3ab,IEEE 802.1ab: LLDP,IEEE 802.1p QoS Support (2 Queues),IEEE 802.1p: Class of service,IEEE 802.1Q: VLAN Tagging,IEEE 802.1w: Rapid spanning tree protocol,IEEE 802.3z: 1000Base- SX/LX,IEEE 802.3x: Flow Control and Back pressure,IEEE 802.3u: 100Base-TX / 100Base-FX,IEEE 802.3ad: Port trunk with LACP,IEEE 802.3ab: 1000Base-T

Description Cisco MGE Small Form-Factor Pluggable (SFP) transceiver is an easy-to-install module that provides a simple way to add fiber connectivity or to add an extra Gigabit Ethernet port to your Cisco Small Business or Cisco Small Business Pro series switches. The Cisco MGE transceiver provides fast and reliable connectivity between switches that are located on different floors, in separate buildings, or on a small campus network needing connectivity between sites. This transceiver can support...

Cisco - SFP (mini-GBIC) transceiver module - 1000Base-SX - LC/PC multi-mode - plug-in module - up to 1 km - 850 nm - for Cisco 38XX, 7301, 7301 VAM2+; Catalyst 29XX, 3560, 3750; ME 3400, 4924, 6524

The Cisco 100BASE-FX SFP on Gigabit SFP ports is supported on Cisco Catalyst 3750, 3560, and 2970 series switches.

The 100BASE-LX/LH SFP, compatible with the IEEE 802.3z 1000BASE-LX standard, operates on standard single-mode fiber-optic link spans of up to 10 km. This industry-standard Cisco Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network.

The industry-standard Cisco Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. SFPs can be used and interchanged on a wide variety of Cisco products and can be intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis.

Cisco High-Speed WAN Interface Card - 1 x 10/100/1000Base-T LAN - 1 x SFP (mini-GBIC)