Dynacord : 158 results priced between £25.00 and £2,000.00

B-Stock, Dynacord SL 1800, Amplifier, 19"/2HE, 2 x 900W/4 Ohm, 2 x 550W/8 Ohm, 2 x 1250W/2 Ohm, 1 x 1800W/8 Ohm bridge, 2-Ohm-suited, sym. XLR in/out, Speakon-Out, Gnd-lift, Fan, LPN-Filter (Low-Pass-Notch) Protections: Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turnon delay, 16,3 kg, dimensions 483 x 88,1 x 421,5 mm, 3 Years Warranty, B-Stock with full warranty, may have slight traces of use

protections against overheating, short-circuits and DC voltage and HF and back EMF protection. The fl ow of current at power up is limited and there is a short delay before power is switched to the loudspeaker outputs. An LPN fi lter and a super-fast dynamic audio limiter are further Dynacord-typical features Two parallel and individually controlled 24-bit stereo digital effects devices with 48-bit algorithms offer a total of 2 x 99 live-optimised presets in studio quality. User-friendly Up/Down...

Cabinet - Full-Range. Configuration - Passive 3-Way. Nominal impedance - 8 Ohms. Rated power RMS - 350 Watts. Program power - 700 Watts. Peak power - 1400 Watts. Full range - 70 Hz - 20kHz. Coverage angle - 1 kHz -6dB - 120° Conical. Coverage angle - 10kHz -6dB - 90° * 50°. Passive crossover frequency - 700Hz, 4kHz. Voice coil tracking protection -Yes. Component HIGH - Electro-Voice DH-3Order No.353 078. Component MID - DYNACORD DND 6120 Neodymium Order No.366 302. Component LOW - Electro...

Cabinet Subwoofer. Configuration - Built-In Hi-Cut Filter. Nominal impedance - 8 Ohms. Rated power - RMS 400 Watts. Program power - 800 Watts. Peak power - 1600 Watts. Passive crossover frequency - 124 Hz. Component SUB - DND12S400 Order No. D366712. Connectors - SUB 1+, 1- Wired through 2+, 2-. Connector model - Speakon NL4MPR. Dimensions (WxHxD) mm 545 x 380 x 445 mm. Shipping weight 22 kg. Net weight 20 kg. Enclosure material - Birch Plywood. Finish - 2-Component Paint Grille Powder...

Dynacord TA-TS 400, Tilt Adapter for TS 400 PA/Live Equipment / Accessories for PA Systems

Dynacord LX 3000 Professional Lightweight Amplifier - 19"/2U, 2x 1500W into 4 Ohms, 2x 900W into 8 Ohms, 2x 2100W into 2 Ohms, 1x 4200W into 4 Ohms bridged, 2 Ohms capable, balanced XLR in/out, Speakon outputs, GND lift, three-speed fan, 38.7cm deep. Weight: 8.7kg

Cover for Dynacord Powermate 1000 or CMS 1000 and powermate 1000-2 grey PA/Live Equipment / Accessories for PA Systems

Dynacord A115 and Powermate 600-3 Package Product Code: DYNPROPACK RRP £2525.00 Our Price £1999.00 Brand: Dynacord In Stock Dynacord A115 DYNACORD is once again setting new standards in the mobile loudspeaker segment. The new A-Line family offers three active and three passive models, comprising one 12” and one 15” two-way / full-range system and an 18” subwoofer, in both active and passive versions. Perfectly attuned to one another and equipped exclusively with high-quality components...

300 W RMS 12“ 2-way for use in professional, portable and fixed installations.

The integration of mixing console, power amplifier and effects devices in a compact and modern unit reaches a new high with the PowerMate 600. With 6 Mic/Line as well as two Stereo/Line channels, two mixable 24-bit effects devices, a 7 band master equalizer and integrated 2 x 300 W power amplifi er, the PowerMate 600 is the absolute allround solution for a multitude of applications, ideally suited to the needs of both single entertainers and small bands. For schools, clubs or similar institutions...

Dynacord Powermate 600-2 Side Panel Left, Grey

Dynacord D12-3 D-Lite Series - 3-way full-range speaker, 12/6/1", 350W/8ohm (RMS), 700W/8ohm (peak), 90° x 50° CD horn, 70Hz-18kHz, 131dB maximum SPL, Speakon in/out, stand mount, plastic housing (PP). Dimensions: 58.6 x 42.9 x 32cm. Weight: 19kg. Colour: Black

Dynacord TS 400, Vertical Array, 4x 6,5" DND 6130-16 Neodym Woofer, 1x 1" DHT3 driver, 90° x 40°, 4 Ohms, 600 Watt RMS (2400 W Peak), 131 dB SPL max, 74 - 20.000 Hz, 2x Speakon NL4 connectors, 10x M6 thread, dimensions: 199 x 935 x 281 mm, weight 17 Kg, optional accessories: wall bracket WMK-25, Tilt-Adapter TA-TS400, CB-TS400 carry bag

The Dynacord brand offers great quality and reliability so we have decided to put this great package together. The Dynacord A112A from the very popular A-Line range and the excellent CMS 600 3 passive lightweight mixing desk. This will give you great sound quality and piece of mind with reliability.  

1 x 15 classic bass amp. With fitted flight case. 7-Band EQ. Hi and low input. Built in compression and distortion. Only £250.

Dynacord Powermate 1600-3 Bundle containing DYNACORD POWERMATE 1600-3 (order code 254044), PRO SNAKE MC 1622 (order code 257257) PA/Live Equipment / Powered Mixers

Flightcase designed especially for the Dynacord Powermate 2200 MK3 Powermate 2200 MK3 can be operated whilst it is still in the case 4x Butterfly catch with loops to fit padlock hold the lid securely in place (padlock not supplied) Lid removes completely via butterfly catches 4x Recessed handles on sides 4x Large rubber feet bolted to base Fully foam lined Manufactured from 9.5mm Laminate Internal 819mm (W) x 498mm (L) x 155mm (H) External approx 900mm (W) x 580mm (L) x 255mm (H) Weight approx 1...

Dynacord WK-C18, Wheel Kit for Subwoofer C1.18 und C2.18

Dynacord D15-3 D-Lite Series - 3-way full range system, 15"/6"/1" drivers, 500/1000W (RMS/peak), 8Ohm, Horn Dispersion 90° x 50°,, 50 - 18,000Hz frequency response, 133dB SPL max., Speakon in/out, stand mount, plastic housing (PP). Weight: 24kg; dimensions: 68.5 x 44.6 x 41.3cm; colour:black.

Flightcase designed especially for the Dynacord CMS2200 MK3 Dynacord CMS2200-3 can be operated whilst it is still in the case 2x Butterfly catch with loops to fit padlock hold the lid securely in place (padlock not supplied) Lid removes completely, fitted with 2x lift-off type hinges at rear of case 2x Recessed handles on sides 4x Large rubber feet bolted to base Fully foam lined Internal 819mm (W) x 559mm (L) x 155mm (H) including 60mm at the rear for connections External Approx 880mm (W) x 620mm...

Frequency Response (-10dB) 50 - 20000 Hz. Sensitivity 1W/1m 99 dB. Max. SPL / 1m (calc) 131 dB. Coverage (nominal -6dB) H° 65 °. Coverage (nominal -6dB) V° 65 °. System Power Handling (continuous/program/peak) 300/600/1200 Watts. LF Transducer DL12BFH. HF Transducer DH2010. Crossover Frequency 1500 Hz. Nominal Impedance (Passive) 8 Ohms. Minimum Impedance 6 Ohms. Color Black. Color White. Directivity Index 11.1 dB. Flying Yes. Input Connections Four-pin Speakon (2). Outdoor No....

Dynacord PSD 215, 15" Bass Reflex Subwoofer, 128dB Max, 2x 1000 W RMS Class-D Amplifier, 24 bit one-into-three DSP controller, DSP presets for DYNACORD fullrange speakers, Line In, Line Thru, TOP out, SUB out, DSP out for delay lines, front fills, etc., Integrated Graphic EQ and signal generator, M20 Thread, black finish, dimensions 640 x 465 x 694 mm, Weight 39,6 Kg

Dynacord D8 A - active full-range speaker (8" + 1"), 800W (500W RMS), 123dB maximum SPL, 90° x 50° CD horn, XLR in/out, XLR/jack combi input, switchable mic/line input, switchable hi-pass for sub-top applications, pole mount, plastic housing (PP), suitable for top and wedge applications. Dimensions: 442 x 282 x 259mm. Weight 8.95kg. Colour Black

Dynacord Powermate 1000-3 Reference Powered Mixer - 2x 1000W/4 Ohms RMS, 2x 600W/8 Ohms, 2x 1350W/2.7 Ohms, 6x mic/line XLR ins with 3-band EQ (with parametric mids), 4x mic/stereo line combi inputs with 3-band EQ, 2x 24bit stereo FX, 2x FX/aux for internal FX, 2x aux (pre/post switchable), 2x monitor aux (pre), mute per channel, switchable 80Hz low cut, switchable voice filter per XLR input, feedback filter (mon 1&2), new 11-band master EQ, B-master out for recoding or mono subwoofer etc, USB connection...

Order has arrived in good condition and very well packaged. Tracking information and communications where extremely helpful.

I cannot praise Thomann enough. for speed of service, value for money, and the vast range of products, all in easy reach

Flightcase designed especially for the Dynacord CMS 600-3 Dynacord CMS 600-3 can be operated whilst it is still in the case 1x Butterfly catch with loops to fit padlock hold the lid securely in place (padlock not supplied) Lid removes completely, fitted with 2x lift-off type hinges at rear of case 1x Techno handle on the side 4x Large rubber feet bolted to base Fully foam lined Internal 417mm (W) x 417mm (L) x 147mm (H) including 67mm at the rear for connections External 497mm (W) x 497mm (L) x ...

Dynacord WL 90 R, broadband barrier-system, 4/6W, 60-16.000 Hz, white, 6W-transformer, LS-controller, price for pair!

Dear sir, I just want thank you for a great guitar !! also say what a great service !! Many thanks from a very happy customer!!

Dynacord VL 62 Variline, high end mid high speaker, 6" 1", 150 Watt (600 Watt Peak), 16 Ohms, 122 dB SPL max., 90 - 20.000 Hz, M10 flying points, Speakon connections, dimensions WxHxD 217x 379x 230 mm, 8 Kg, black housing, especially for Speach and Delay lines, 3 years warranty

Dynacord , Electro-Harmonix , ESI , Hercules Recording

Flightcase designed especially for the Dynacord CMS1600 Dynacord CMS1600 can be operated whilst it is still in the case 2x Butterfly catch with loops to fit padlock hold the lid securely in place (padlock not supplied) Lid removes completely, fitted with 2x lift-off type hinges at rear of case 2x Recessed handles on sides 4x Large rubber feet bolted to base Fully foam lined Internal 672mm (W) x 550mm (L) x 140mm (H) including 60mm at the rear for connections External 750mm (W) x 630mm (L) x 210mm...

Dynacord D12 D-Lite Series - full range system, 12/1.4", 300/600watts/8ohm, 80°x40° dispersion, 70-18,000Hz, 126dB max SPL, metal flange for standard speaker stands, Speakon in/out, plastic-construction (PP), Dimensions: 58.2 x 43.3 x 32.3cm. Weight: 16kg. Colour: Black. PA/Live Equipment / Fullrange Speaker Cabinets

Dynacord DL 9 -100V, B-Stock, wide band ceiling mount speaker system, 4/6 W, 90-14.000 Hz, white, 6W transformer, incl. mounting material, circumferance 145 mm. Comments: very light weight, mountable without tools, RAL 9010 white