Eco Friendly Gu10 Mains Downlight - Cfl Lamp Included : 379 results priced between £2.00 and £150.00

7w CFL mains downlight brushed with nickel effect ring. C/W 2 metres mains cable and link plug. Plug in to D057 6-way socket block with mains lead and plug. Surface mounted. Requires compact fluorescent lamp (Included) light equivalent 1 x 7w CFL = 1 x 40w GLS. Metal/plastic construction. BS EN 60598-2-1 IP20 rated.

IP20 Rated. 2M Mains lead to connect into ETRD057 connector block. 7W CFL lamp included. Brushed nickel effect trim. 90mm Diameter.

Fire Rated Downlight Mains Fixed - GU10 white

Product Description The light is cast by four spotlights discreetly nested in the shiny rectangular base. The effect is a stylish light source magnificently suspended in the air. Polished/brushed chrome finish.230V. Size: (LxWxProj.) 280x280x510mm.Lamps: 4x50W aluminium reflector GU10 (supplied).

These high quality downlights are Zinc Alloy construction, they have a Cast Alloy retaining ring for easy lamp removal, an enclosed terminal block and pre-wired GU10 lampholder.Requires 240V GU10 Halogen bulb (not included). 80mm diameter x 110mm depth(66mm hole cut out. IP20 rated. very popular to electrical contractors. Supplied in Brushed Nickel.

White finish. Cut-out: 65mm. Rim dia: 80mm. Void depth: 100mm. Lamp: GU10 50W aluminium reflector (supplied).

These high quality downlights are Zinc Alloy construction, they have a Cast Alloy retaining ring for easy lamp removal, an enclosed terminal block and pre-wired GU10 lampholder.Requires 240V GU10 Halogen bulb (not included). 80mm diameter x 110mm depth(66mm hole cut out. IP20 rated. very popular to electrical contractors. Supplied in Chrome.

Position: Fixed positionFinish: Available finishes are White, Chrome, Satin Chrome, Brass and Antique Brass. Material: Pressed steel. Voltage: Mains voltage. Supplied with a GU10 lamp holder. Wattage: Supplied without lamps. Can only be used with standard size lamps, no bigger than 56mm in length due to a height restriction in the design. IP Rating: IP20, not water resistant. Manufacturer: Ansell Lighting. Guarantee: 2 Years. Product code: AGU10D/**. White: AGU10D/WH. Chrome: AGU10D/CH....

Description Delivery details Returns Information GU10 Mains Voltage 240v Gimbal / Tilt Downlight. Manufactured in high quality pressed steel. Complete with TUV approved ceramic lampholder, pre-wired terminal block and retaining clips. Transformer not required.- lamp: 50 watt GU10 (not included) - cut out: 75mm - overall diameter: 83mm - depth: 90mm Orders placed Monday to Friday before 2pm will generally be picked and packed for immediate despatch. Some products specify a longer delivery time in...

Scolmore (Click) lighting have a comprehensine collection of downlights and eyeball fittings, mains and low voltage lighting.If you require a particular item from Scolmore Lighting please view www.scolmore.com and afull range of their products can be veiwed and we can give you a price on a non listed item. Quality lighting from a quality manufacturer. ( please remember when ordering lamps and transformers are extra, please ask if you require PED to supply lamps or transformers for the low voltage...

MQX Xenon GU10 Mains Voltage Fixed DownlightMQX Xenon GU10 Mains Voltage Fixed Downlight Features and Specifications Polished chrome finish Cut-out: 65mm Rim Dia: 80mm Void depth: 100mm Lamp: MQX Xenon 50W aluminium reflector GU10 (supplied) Complete with fitting instructions

Hunza are proud to announce the new addition of the GU10 lighting source to our wall mounted fittings. This lamp allows direct connection to 240v mains feed, thus dispensing for the need for a transformer. All fittings (where applicable) are fitted with flush lenses, quality European lamp and wall plate for easy waterproof installation.

Polished chrome effect. Steel. Features: IP20; Non-Dimmable; CFL Lamps Included; Max. 9W / GU10; Cut-Out Dia: 65mm; Depth: 115mm; Steel; Model No: 21409; CFL. Specifications: Cut-out dia: 65mm. Dia: 85mm. Depth: 115mm. 3 x GU10 CFL lamps included. Non-dimmable.

Brass-Chrome-Satin Chrome or White. The Flameguard system used in these downlights effectively restore the fire integrity of ceilings while also providing an acoustic barrier. Comes complete with a branded GU10 240V heat forward lamp.Cutout: 98mm. Recess Depth 95mm.Eyeball tilts up to 30 degrees and swivels up to 355 degreesLoop in loop out facility allows wiring without the need to buy junction boxesPart Numbers: GU425WH GU425CH GU425SC GU425BR

A recessed round mains voltage downlight in a White finish. Suitable for use in zone 1 of a bathroom subject to UK wiring regulations. Requires a mains voltage 35W GU10 halogen lamp. Suitable for dimming. Diameter: 87mm Recessed height: 108mm Projection from ceiling: 5mm IP rating: IP65 Max wattage: 1 x 35W GU10 halogen (not included) We would advise that no hole should be cut in the ceiling before receipt of fittings.

EAN: 4043544219015 - manufacturer-number: QP40.213DIM1-10si - Downlight CFL Mounting method Built-in, Lamp Compact fluorescent lamp, Lamp holder G24q-1/GX24q-1, Suitable for number of lamps 2, Type of gear Electronic ballast 1-10 V, Control unit included, Dimmable, Nominal voltage 230 ... 230V, Suitable for through-wiring, Colour housing Silver, Reflector High-gloss, Light sharing Symmetric, Light outlet Direct, Length 222mm, Width 222mm, Built-in length 209mm, Built-in width 209mm, Built-in depth...

Cut a 86mm diameter hole. Install the top hat housing in the hole and fix the perforated rim to the plasterboard. Plaster with a skim coat to the circular bead, paint then install the rear housing, lamp and retaining bezel. Full instructions are provided in the PDF document.

A recessed round mains voltage downlight in a Chrome finish. Suitable for use in zone 1 of a bathroom subject to UK wiring regulations. Requires a mains voltage 35W GU10 halogen lamp. Suitable for dimming. Diameter: 80mm Recessed height: 105mm Projection from ceiling: 12.5mm IP rating: IP65 Max wattage: 1 x 35W GU10 halogen (not included) We would advise that no hole should be cut in the ceiling before receipt of fittings.

Large retrofit white GU10 mains downlight eyeball converter. Supplied with GU10 lamp and ceramic GU10 & low voltage lampholders. Converts traditional 70-140mm R50, R64 and R80 downlights and eyeball cutouts to modern GU10 or low voltage lighting.

GU10 Mains Voltage Recessed Fixed Downlight PAR 16 GU10 Mains Voltage PAR 16 Steel Recessed Fixed DownlightSteel PAR 16 fixed downlight Fully enclosed with fixed terminal block to comply with current low voltage regulations Diameter 80mm, Depth 87mm, Cut Out 60mm Double clip fix Requires 1 x GU10 50W max bulb (not incl) No transformer required Picture shows Polished Brass finish GU10 Mains Voltage Recessed Fixed Downlight PAR 16 - Polished Brass Specification Internal Code: EMC-405PB Bulb Included...

A recessed round downlight in a brushed Chrome finish with Blue LEDs around the edge. LED driver included. Suitable for use in zone 1 of a bathroom subject to UK wiring regulations. Requires a mains voltage 35W GU10 halogen lamp. Not suitable for dimming. Diameter: 100mm Projection from ceiling: 17mm Recessed height: 105mm IP rating: IP44 Max wattage: 1 x 35W GU10 halogen (not included) + 9 x Blue LEDs (included) We would advise that no hole should be cut in the ceiling before receipt of fittings...

Downlights Paulmann Premium Line GU10 Three Downlight in Chrome Features: -Recessed light. -Premium Line range. -Chrome finish. -Swivel range: 30 Grad. -Colour temperature in K: 2700 K. -892.38 11W. -Energy saver. -Aluminium rust-proof. -Product with a limited surface temperature. -IP safety classifications. -Safety classification 2. -Eco friendly. Specifications: -IP Rating: 23 -Accommodates max. (3) 11W GU10 medium base bulb (not included). -Mounting hole: 6.8 cm. -Mounting depth: >10 cm. ...

GU10 Mini Halogen lamps / lightbulbs. GU10 Mini 35mm Diameter. 35w Light output. 2500 hours Long life halogen lamps. 220-240v mains voltage halogen lamps.

Product Description This Aurora Mains Voltage Aluminium Fixed Lock Ring Downlight is available in either White, Polished Brass, Polished Chrome, Satin Silver and Satin Nickel finish. This fitting is suitable for 30 min, 60 min & 90 min fire rated timber ceiling & suspended ceilings. Cut out hole size 75mm Minimum ceiling void Depth 135mm Overall Diameter 90mm. 2 Years Guarantee on the fitting. 12 month Guarantee for the Megaman bulb. Instruction Leaflet available in PDF format above. The Megaman...

Large retrofit polished chrome GU10 mains downlight eyeball converter. Supplied with GU10 lamp and ceramic GU10 & low voltage lampholders. Converts traditional 70-140mm R50, R64 and R80 downlights and eyeball cutouts to modern GU10 or low voltage lighting.

Fire & acoustic barrier downlights in accordance with new building regulations: BS476: part 21: 1987 & part E: appendix F

Ranex Directable Downlights Aluminium 3 x GU10 50w Fittings, Bulbs Included Indoor Use Sleek Design

Details Voltage: FG: 240V Wattage: 35W max (flammable surfaces) 50W max (non-flammable surfaces) IP Rating: IP20 Lamp (not included): FG: GU10 halogen/CFL/LED Aluminium reflector (when using halogen) Material: Pressed steel bezel Steel can

Brushed chrome adjustable recessed Downlight with chrome finish ring and lamp surround.

VLS3936_6405529 Features: -Downlight.-Matt white colour.-Aluminium material.-Recessed ceiling mounting.-Suitable for the operation of direct mirror lamps.-Required transformer part no for 461075.-9 cm swivel: 45 degree.-16.5 cm swivel: 30 degree. Specifications: -12 V.-Accommodates G5.3 50W MR16 bulb (not included), GU10 50W bulb (not included), GX10 35W CMH - MR16 bulb (not included), G53 75W QRB 111 bulb (not included) or GU10 75W ES111 bulb (not included). Dimensions: -9 cm fitting dimensions...

Ranex Directable Downlights Brushed steel 3 x GU10 50w Fittings, Bulbs Included Sleek Design Indoor Use

240V Mains voltage GU10 halogen bulb Dimmable and available in 50W version Glass protects against touching the burner against dust and moisture GU base denotes Aluminium reflector (this causes the heat to be directed forwards, rather than behing the lamp) Ideal for display lighting, spotlights and downlights

EAN: 4043544218568 - manufacturer-number: ECTE47.218 - Downlight 2x18W CFL Mounting method Built-in, Lamp Compact fluorescent lamp, Suitable for number of lamps 2, Lamp power 18W, Type of gear Electronic ballast standard, Control unit included, Nominal voltage 230 ... 230V, Suitable for through-wiring, Light sharing Symmetric, Light outlet Direct, Outer diameter 230mm, Built-in depth 135mm, Built-in diameter 207mm, Protection class I, Degree of protection (IP) IP20, Fire resistance F, Downlight Montageart...

Ranex Directable Downlights Aluminium 1 x GU10 50w Fittings, Bulb Included Indoor Use Sleek Design