Garmin Transducer B60 Thru-hull Depth & Temp 12deg Tilt : 7 results priced between £50.00 and £900.00

Description This entry-level tilted bronze transducer accommodates deadrise angles of 16 to 24 degrees without a fairing. An excellent choice for fiberglass and wood hulls, this 600 W 6-pin transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; and a beamwidth of 45 to 12 degrees. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.

This entry-level tilted bronze transducer accommodates deadrise angles of 8 to 15 degrees without a fairing. An excellent choice for fiberglass and wood hulls, this 600 W 6-pin transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; and a beamwidth of 45 to 12 degrees. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.

Plastic, thru-hull mount transducer with depth and temp. Operating frequency of 200 kHz. Beamwidth of 12 degrees. Transducer kit comes with installation instructions. Follow the instructions carefully so you don't mangle your boat in the process.

Description The bronze, tilted thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and wood hulls. This 6-pin 375 W transducer has a depth of 900 ft; an operating frequency of 200 kHz; a beamwidth of 14 degrees; and a 8 to 15 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat. *Do not use on metal hulls.

Depth Range: 50 kHz - 235 m to 353 m (800' to 1,200') 200 kHz - 118 m to 206 m (400' to 700')

Description Step up to a 1 kW transducer without fairing. This flushmounted bronze housing protrudes less than a quarter of an inch outside the hull and can sit on trailer rollers/bunks without damage. A 6-pin transducer, it has a depth of 1,200 to 1,800 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 22x20 or 6x6 degrees; and mounts on a 16 to 24 degree deadrise angle. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.

Description Step up to a 1 kW transducer without fairing. This flushmounted bronze housing protrudes less than a quarter of an inch outside the hull and can sit on trailer rollers/bunks without damage. A 6-pin transducer, it has a depth of 1,200 to 1,800 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 22x20 or 6x6 degrees; and mounts on an 8 to 15 degree deadrise angle. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.