Gent 4 Zone Conventional Fire Alarm Panel : 57 results priced between £75.00 and £600.00

Model: PMP24. Detection Zones: 24. Mains Voltage: 230V AC +10% / -15% @ 50/60 Hz. System Voltage: 24V DC (nominal). Zone Voltage: 21V DC. Sounder Alarm Output: 4 x 150mA @ 24V DC. Fault Relay Output: 1 x relay SELV @ 1A maximum. Fire Relay Output: 1 x relay SELV @ 1A maximum. Zone Capacity: 32 devices. Remote Sounder Activation: N/A. Sounder Activation Delay: 0 – 9 minutes in 1 minute increments. Zone End Of Line: IN4002 Diode. Sounder End Of Line: 10KΩ Resistor. Charger Voltage: 28...

* Designed to EN54 parts 2 and 4. * 1, 2, 4, 6 or 8 zone circuits (see order codes). * Up to 4 conventional sounder circuits. * Head removal monitoring. * Fire and Fault relays. * Key-pad, key-less activate controls. * Programmable ‘class change’ input. * Combined surface / semi-recessed plastic enclosure. * Internal switch-mode power supply (EN54-4 A2). * Disablement function for zones and/or sounders. * One man test. * Sounder delay option. * Selectable auxiliary supply output. * Space...

C-TEC CFP704E 4 Zone Conventional Fire Alarm Panel Overview C-TEC CFP704E, 4 Zone, Conventional Fire Alarm Panel CFP conventional fire panel offers an array of features, making in a good choice for any user or installer. Very competitively priced, it has full LPCB certification to the latest revisions of EN54 parts 2 and 4.

Part No: FX4204 Easy to install and use, the Firedex 4200 series of conventional fire panels delivers basic fire detection and alarm facilities at exceptional value for money. Designed with smaller installations in mind, a choice of 2 or 4 zone compact panels are available, each capable of having up to 20 detectors connected per zone. End of line devices for both detector and alarm circuits are conveniently supplied as standard. Firedex 4200 systems are also easy to use, with a simple “one-shot”...

*LPCB certified to the latest versions of EN54 Parts 2 and 4. *Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry to access level 2. *2, 4 or 8 zone circuits (dependent on model purchased). *Four conventional sounder circuits. *Integral 1.5A EN54-4/A2 compliant switch mode PSU. *Wide range of engineering functions including zone test, coincidence*, zone delay and non- latching zones*. *Two on-board relays (Fire and Fault). *Two open-collector outputs...

Four zone, two-wire conventional fire alarm panel. AlarmSense detectors, manual call points and sounders can be fitted on the same two wires. Suitable for surface or semi-flush mounting. Two auxiliary input connections. Fire and fault relays. Maximum number of detectors and manual call points per zone: 25. User-friendly interface: colour coded buttons and fire and fault light indicators. Four conventional sounder circuits suitable for non-AlarmSense sounders. End of line units included (one...

"The MAG4 Fire Alarm panel has been carefully designed to answer the rigorous demands of specifiers, installers and users."

Fully compliant with EN54 Parts 2 and 4. Available with 2, 4 or 8 zone circuits. Four conventional sounder circuits. LStandard, economy and LPCB approved versions available. Installer-friendly design accommodates easy first fix and straightforward maintenance. Attractive flush or surface mountable plastic lid and enclosure. Auxiliary remote, auxiliary fire, fault and reset outputs. Class change and alert inputs. Low quiescent current. Intuitive user-friendly interface. Multiple indicators...

*LPCB certified to the latest versions of EN54 Parts 2 and 4. *Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry to access level 2. *2, 4 or 8 zone circuits (dependent on model purchased). *Four conventional sounder circuits. *Integral 1.5A EN54-4/A2 compliant switch mode PSU. *Wide range of engineering functions including zone test, coincidence*, zone delay and non- latching zones*. *Two on-board relays (Fire and Fault). *Two open-collector outputs...

Part No: FX2204BW The Firedex 2200BW range of panels are designed to meet a wide range of conventional system requirements. The advanced features include a simple “one-shot” user test facility, class change contacts, battery voltage alarms and charger temperature compensation, all of which are included as standard to ensure ease of use and high reliability. Attention to detail is also emphasised by the neat log book holder feature, allowing essential records to be stored close to hand, ready for...

Control panel with default regional set-up mode and programmable sounder outputs. Uses existing wiring. One-man walk test and earth fault detection. Front panel programming with fault diagnostic and reporting. Features: Class B Wiring; Up to 256 Conventional Device Points; Detector Testing. Specifications: 24V DC. EN 54. 405 x 180 x 505mm.

BS5839 and EN54 Compliant Four zone conventional fire panel Unlimited number of call-points 30 fire detectors per zone Active end of line monitoring Two sounder circuit outputs Fault identification One-man test facility Volt free fire & fault rel

Number of Zones: 4. Maximum Load Per Zone: 3mA. Number of Sounder Circuits: 4. Maximum Sounder Circuit Load: 500mA per circuit (max 1A combined). Batteries (Not Included): 2 x 12V 2.1Ah. Battery Standby (Using Above Specified Batteries): 72 Hours plus 0.5 Hours Alarm Load. Aux Relay Contacts: 1 N/O and 1 N/C Pair, 1A at 24V. Relevant Standard: EN54 Parts 2 and 4. Approvals: LPCB Approved to EN54 Parts 2 and 4. Cable Entry: - 13 Top and 13 Rear. Cable Type: BS 6387, 2 Core, min 1.5mm Square...

A conventional fire alarm detection system but so much more! The detectors combine a sounder and operate on the same two conductors as the Easyfire Call Points, saving up to 40% of the final installed system costs. These are no ordinary detectors, each unit has a Motorola 8 bit processor on board controlling the sounder and intelligently self calibrating signals from the high quality optical chamber and the heat detector element. The detector can easily be set on site to 1 of 7 detection modes...

Model: PMP8. Detection Zones: 8. Mains Voltage: 230V AC +10% / -15% @ 50/60 Hz. System Voltage: 24V DC (nominal). Zone Voltage: 21V DC. Sounder Alarm Output: 4 x 150mA @ 24V DC. Fault Relay Output: 1 x relay SELV @ 1A maximum. Fire Relay Output: 1 x relay SELV @ 1A maximum. Zone Capacity: 32 devices. Remote Sounder Activation: N/A. Sounder Activation Delay: 0 – 9 minutes in 1 minute increments. Zone End Of Line: IN4002 Diode. Sounder End Of Line: 10KΩ Resistor. Charger Voltage: 28.4V...

Model: PMP16. Detection Zones: 16. Mains Voltage: 230V AC +10% / -15% @ 50/60 Hz. System Voltage: 24V DC (nominal). Zone Voltage: 21V DC. Sounder Alarm Output: 4 x 150mA @ 24V DC. Fault Relay Output: 1 x relay SELV @ 1A maximum. Fire Relay Output: 1 x relay SELV @ 1A maximum. Zone Capacity: 32 devices. Remote Sounder Activation: N/A. Sounder Activation Delay: 0 – 9 minutes in 1 minute increments. Zone End Of Line: IN4002 Diode. Sounder End Of Line: 10KΩ Resistor. Charger Voltage: 28...

Fully compliant with BS EN54-2 and BS EN54-4. Allows systems to be installed in accordance with BS5838: Part6. 2 wire system reduces installation cabling. 2 wire repeaters and ancillary boards via serial bus. Fully programmable using simple menu options. Adjustable sounder delay time. Sounder configuration options. Zonal sounder delay for detectors only. Zonal sounder delay for call points only. Coincidence output via ancillary board. Short circuit fire selectable by zone. Non latching...

* Designed to EN54 parts 2 and 4. * 1, 2, 4, 6 or 8 zone circuits (see order codes). * Up to 4 conventional sounder circuits. * Head removal monitoring. * Fire and Fault relays. * Key-pad, key-less activate controls. * Programmable ‘class change’ input. * Combined surface / semi-recessed plastic enclosure. * Internal switch-mode power supply (EN54-4 A2). * Disablement function for zones and/or sounders. * One man test. * Sounder delay option. * Selectable auxiliary supply output. * Space...

* Designed to EN54 parts 2 and 4. * 1, 2, 4, 6 or 8 zone circuits (see order codes). * Up to 4 conventional sounder circuits. * Head removal monitoring. * Fire and Fault relays. * Key-pad, key-less activate controls. * Programmable ‘class change’ input. * Combined surface / semi-recessed plastic enclosure. * Internal switch-mode power supply (EN54-4 A2). * Disablement function for zones and/or sounders. * One man test. * Sounder delay option. * Selectable auxiliary supply output. * Space...

* Designed to EN54 parts 2 and 4. * 1, 2, 4, 6 or 8 zone circuits (see order codes). * Up to 4 conventional sounder circuits. * Head removal monitoring. * Fire and Fault relays. * Key-pad, key-less activate controls. * Programmable ‘class change’ input. * Combined surface / semi-recessed plastic enclosure. * Internal switch-mode power supply (EN54-4 A2). * Disablement function for zones and/or sounders. * One man test. * Sounder delay option. * Selectable auxiliary supply output. * Space...

* Designed to EN54 parts 2 and 4. * 1, 2, 4, 6 or 8 zone circuits (see order codes). * Up to 4 conventional sounder circuits. * Head removal monitoring. * Fire and Fault relays. * Key-pad, key-less activate controls. * Programmable ‘class change’ input. * Combined surface / semi-recessed plastic enclosure. * Internal switch-mode power supply (EN54-4 A2). * Disablement function for zones and/or sounders. * One man test. * Sounder delay option. * Selectable auxiliary supply output. * Space...

The Fike Twinflex Pro 4 Zone Fire Alarm Panel is an analogue non-addressable panel and is capable of running up to 128 devices in total. Using a conventional cabling format, devices communicate with the panel using the Twinflex data protocol.

Menvier Conventional Fire Alarm Panel, Low Cost, Two Zones, 24V, 300mm x 300mm x 74mm

Fire Alarm System Panel 4 Zone ESP, Fireline conventional fire alarm panel. Technical: 4 programmable zones, Activate end of line monitoring, 30 fire detectors per zone, Unlimited number of call points per zone, Integral manual alarm button, Class change facility, Enable/disable security key, One man walk test facility, Fire volt free change over relay, Fault volt free change over relay, Individual sounder circuit fault ID Individual zone/sounder isolate, BS5839 and EN54 compliant, CE certified,...

Complies fully with EN54: pts 2 & 4. Attractive flush or surface mountable plastic lid and enclosure. Four conventional sounder circuits. Auxiliary fault, reset, remote and auxiliary fire outputs. Wide range of engineering functions including zone tet, non-latching zones, programmable delays and coincidence. Code entry version available as standard, keyswitch models available on request. Ancillary connections for up to eight two-wire repeaters per system and optional CFP relay boards. CFP...

Output (Sounder 1 + 2): 24V max. 300mA fused. Active end of line monitoring. Integral manual alarm button. Enable / disable security key. One man walk test facility. Fire + Fault volt-free change over relay. Individual sounder circuit fault ID. Battery: 1x 12V. Dimensions: 340 x 290 x 100mm (W x D x H).

This conventional fire alarm kit includes the following fire alarm equipment; 1 x Infinity 4 Zone Fire Alarm Panel 2 x Sealed Lead Acid Batteries - 3.4Ah, 12V DC VDS Approved (Z20304) 5 x Fyreye Extra Conventional Optical Smoke Detector (FEOE2000) 1 x Fyreye Extra Conventional Rate of Rise and Fixed Heat Detector (FEHE2000) 6 x Fyreye MKII Common Base (MKII-CB) 2 x Miditone Electronic Fire Alarm Sounder (ZMDD/8R) 2 x Conventional Call Point (ZT-CP3) 1 x CHEKKIT Smoke Detector Tester 35ml (CHEK05...

Supplied complete with all required batteries. Programmable features for 4 zones. Allows up to 32 detectors per zone. Unlimited call points per zone. Integral evacuation alarm feature. Programmable input class change or isolate sounders or activate delays. 'One man walk' test facility. Volt-free fire changeover relay. NC fault relay. Zone isolate facility. Programmable sounder delay. Auxiliary 24V DC supply - 100mA. Double-knock facility. HMO pre alarm mode. Screwless terminal to ensure...

Designed to comply with EN54-2/4 Available with 2, 4 or 8 zone AlarmSense zone circuits AlarmSense detectors, call points, sounders and beacons can be connected to the same pair of supply wires, providing considerable cost savings on installation. Four conventional sounder circuits Class change and alert inputs Auxiliary fault, reset, remote and aux. fire outputs Code and key entry variants Wide range of engineering functions including zone test, non-latching zones, programmable delays and coincidence...

Newlec Fire Alarm Panel, Conventional, Eight Zones, 20 Max Detectors per Zone, 200mA

Innovative solution to false alarms in “Housing of Multiple Occupation". Only one circuit per zone to connect detectors and sounders. Requires 2 x Yuasa 12v 2.1ah batteries (not included). EN54 Pt 2 & 4 compliant. Easy to install. 72 hour standby. Built in auxiliary sounder. Panel can differentiate between call points and detectors. Up to 32 devices per zone.

Mains Voltage : 230V AC +10% / -15% @ 50/60 Hz. System Voltage : 24V DC (Nominal). Zone Voltage : 21V DC (Nominal). Sounder Alarm Output : 4 x 150mA @ 24V DC. Fault Relay : 1 x Volt Free Relay, SELV @ 1A Max. Zone Capacity : 32 Devices Per Zone. Remote Sounder Operation : Via N/O Contact Connected to Class Change. Sounder Activation Delay : 0 to 9 Minutes in 1 Minuite Increments. Zone End of Line : 1N4002 Diode (Cathode Stripe to Zone +ve). Sounder End of Line : 10k Resistor. Charger Voltage...

The Rafiki Twinflex 4 Zone Fire Alarm Panel uses Twinflex plus technology. Twinflex plus is a patented, 2 wire intelligent fire alarm system suitable for the majority of fire alarm installations.

Part No: FX2208BW The Firedex 2200BW range of panels are designed to meet a wide range of conventional system requirements. The advanced features include a simple “one-shot” user test facility, class change contacts, battery voltage alarms and charger temperature compensation, all of which are included as standard to ensure ease of use and high reliability. Attention to detail is also emphasised by the neat log book holder feature, allowing essential records to be stored close to hand, ready for...

Full compatibility with Hochiki's ESP and Apollo's XP95, Discovery and Xplorer protocols. The ability to interconnect up to eight XFP main panels (any variant) onto a two wire RS485 network (alternatively, up to eight XFP repeaters can be connected to a non-networked XFP main panel). Two independently programmable conventional sounder circuits. Two programmable inputs. A fault output relay and three programmable relay outputs with voltage free changeover contacts. A selection of zone dependency...