Huttons GoldLabelPondSealer - One Shot - 75ml BLACK
This pondsealer is excellent for sticking liners together and sealing all kinds of joints. Very effective and easy to use. Seals plastic rubber PVC etc. We have two sizes available: our small one shot" pondsealer which is great for smaller jobs and tight spaces (no gun needed) and our larger tube which requires a standard skeleton gun (mastic gun) which is ideal for larger jobs. Large tube - GoldLabelPondSealer contains 290ml. This is available in black or clear. Small tube - "One shot" Gold...
No longer need you worry about sealing that Pond liner and installing a Bottom Drain use this remarkable sealant and it will never leak, in fact you would have to break the bottom drain to be able to remove it, repair instantly a cut in the liner below the water level, if you can reach it then you can seal it without any worries whatsoever.
For best results clean all surfaces, to be free of grease, algae. Place sealer directly onto the surface you wish to bond/seal. For bonding where there is movement (expansion & contraction) of different substrates, leave a minimum 2mm thickness of bead between surfaces. Where there is livestock near the sealer, protect from ingestion while curing.
Clean area to be repaired. Cut patch to over size. Shape patch to circle or oval shape. Using GoldLabel Underwater Sealer, run a continuous bead 5 mm from edge and another bead 20mm inside of that. Press gently onto original liner.
Before painting check your surfaces for imperfections, cracks etc and fill where appropriate. For large cracks in the concrete, vee out the cracks to approx 10mm - make sure the surface to be bonded is solid and dust free. Fill with GoldLabelPond & Aquarium Sealer.
imperfections, cracks etc and fill where appropriate. For large cracks in the concrete, vee out the cracks to approx 10mm - make sure the surface to be bonded is solid and dust free. Fill with GoldLabelPond & Aquarium Sealer. Painting can then commence immediately. Although Aqua Pond Paint is much safer than normal resin systems, it is recommended you should avoid contact by using barrier cream or gloves. Any splashes should be washed off with soap and water.