Guardex Ph Increaser 1kg /leicester Hot Tub Hire : 7 results priced between £5.00 and £25.00

Product Description Symptoms of low pH in hot tub water include skin and eye irritation, excessive sanitizer use and , more seriously, corrosion of the pumps and heater and pitting or etching on the spa shell surface. Therefore, if the pH of your water is below 7.2 it is important to raise it using pH Increaser. Dose : 11g per 1000 litres of spa water. Pre-dissolve the product in a clean plastic container at a maximum rate of 11g per litre of warm water. Stir well to ensure that the product is fully...

Other than the use of chlorine or bromine to sanitise your spa water you also need to measure and take the necessary corrective steps to ensure that the water in your hot tub is near to neutral as possible by adjusting the pH and TA (total alkalinity) levels:

Simply Watercare pH Plus / Increase comes in a 1KG container, manufactured from the higested grade materials but keeping the price down pH Plus (Sodium Carbonate) should be used to maintain the correct pH of your hot tub water. It should be used when the water is too acidic and needs to be reduced. The ideal range is between 7.2 and 7.6 We recommend that you use Hot Tub Test Strips daily to test the pH of your water. Instructions for Use: Acid/alkaline conditions are measure on the pH scale Ideal...

Fi-Clor Spa pH Increaser - Plus - 1kg. The pH of your spa water is much more important for chlorine than it is for bromine. The pH needs to be kept between 7.2 - 7.6 to ensure optimum conditions for the chlorine to kill unwanted pollution.

includes 0.5kg Bromine Tablets, 1lt Cartridge Cleaner, 1lt Anti-Scale, 1lt Water Clarifier, 0.5lt Surface Cleaning Gel, 1lt Anti Foam, 1.5kg Dry Acid, 1kg Soda Ash, 1kg of Non-Chlorine Shock, 50 Test Strips & Instruction Guide. £115.00