HP SCSI internal and external cable - 0.5 m : 53 results priced between £5.00 and £150.00

The ACK-I-mSASx4-mSASx4-0.5m R is an internal Mini Serial Attached SCSI x4 (SFF-8087) to x4 (SFF-8087) Mini Serial Attached SCSI cable. It measures 0.5 meters and is used for connecting a SATA/SAS controller to a SATA/SAS backplane.

Mini Serial Attached SCSI x4 to x4 Mini Serial Attached SCSI cable. It is used for connecting a SATA/SAS controller to a SATA/SAS backplane.

SCSI HP50 Male - LD50 Male - 0.5m Cable Use to daisy chain external SCSI-2 devices to each other. High Density 50 way D connectors (HD50P) at one end and Low Density 50 way Centronics style connectors (CEN50P) at the other end. Available in a variety of lengths, although it is recommended that the cable length be kept as short as possible. SCSI HD50 Male to LD50 Male - 0.5m Fully screened & moulded SCSI-2 External Cable

SCSI HP68 Male - HP68 Male - 0.5m Cable Connect computers with SCSI High Density 68 way connectors to other SCSI devices that have SCSI High Density 68 way connectors with these high quality moulded SCSI cables that are terminated with a SCSI High Density 68 plug (HP68P) at each end. SCSI-3 The High Density 68 way D is is often referred to as a SCSI-3 connector. It is also referred to as Wide SCSI or Fast and Wide SCSI SCSI HD68 Male to HD68 Male - 0.5m Fully screened & moulded SCSI-3 External Cable

Mini Serial Attached SCSI x4 to x4 Mini Serial Attached SCSI cable. It is used for connecting a SATA/SAS controller to a SATA/SAS backplane.

Description Lindy Internal SAS/SATA Multilane Cable 0.5m This cable allows you to connect an SFF-8484 host controller to an SAS backplane! Specification Connectivity Connector(s) 1 x 32 pin 4i MultiLane SAS (SFF-8484) - male Connector(s) (Other Side) 1 x 36 pin 4i Mini MultiLane SAS (SFF-8087) - male General Storage Cable Type Serial Attached SCSI (SAS) internal cable - with Sidebands American Wire Gauge (AWG) 30 Length 50 cm Manufacturer Warranty Service & Support 10 years warranty...

0.5 Metre eSATA to eSATA lead High Quality 0.5m eSata lead for connecting External Hard Drives etc to PC's / Laptops etc, eSATA will allow transfer speeds between the host and remote devices of up to 300Mbp/s giving significant performance boost over Firewire and USB connections. eSATA to eSATA Data Cable Transfer Speeds 300Mbp/s Colour: Red Length: 0.5 Metre eSATA - Stands for External Serial Advanced Technology Attachment and is the external Version of SATA (used to connect internal PC Components...

This is an internal Mini Serial Attached SCSI x4 (SFF-8087) to (4) x1 Serial ATA (controller based) fan-out cable with SFF-8448 sideband signals. It measures 0.5 meters and is used for connecting a SATA/SAS controller (SFF-8087) to SATA disks, or a SATA/SAS backplane.

For use with SAS/SATA HBAs (Host Board Adapters) and external drive housings Latch type SFF-8088 (4x) to latch type SFF-8088 (4x) connectors SAS (Serial Attached SCSI) compliant Fully compliant with SATA II specifications (Electrical Specifications section 6.6) Full duplex communication up to 3Gb each direction/channel Colour: Black 10 Year warranty

Description SATA 3.0 compatible with transfer rates up to 6 Gbps! Designed to replace the SCSI parallel interface with a much faster, more flexible, 6 Gbps serial interface while maintaining the robust nature of the SCSI command set. The flexibility of SAS facilitates many system-level configurations such as workstations, blade servers, external storage arrays, SAS expanders, host bus adapters (HBAs) and RAID controllers.

This is an internal mini Serial Attached SCSI x4 (SFF-8087) to (4) x1 (SFF-8482) Serial Attached SCSI (controller based) fan-out cable with removable power dongles. It measures 0.5 meters and is used for connecting a SATA/SAS controller (SFF-8087) to four SATA/SAS disks (SFF-8482).

This is an internal mini Serial Attached SCSI x4 (SFF-8087) to (4) x1 Serial ATA (controller based) fan-out cable. It measures 0.5 meters and is used for connecting a SATA/SAS controller (SFF-8087) to SATA disks, or a SATA/SAS backplane.

This is an internal mini Serial Attached SCSI x4 (SFF-8087) to x4 (SFF-8484) Serial Attached SCSI cable. It measures 0.5 meters and is used for connecting a SATA/SAS controller (SFF-8087) to a SATA/SAS backplane (SFF-8484).

Server Accessories

9mm Panels in a range of finishes. Heavy Duty 6 Rivet Steel Ball Corners. Heavy Duty Aluminium Angle & Hybrid Location Extrusion. Large Heavy Locking Duty Butterfly Latches. 4 Heavy Duty Recessed Flip Handles. Hinged lid. All Riveted Construction. 4 x Castor Wheels. Option to add Extra 4 Heavy Duty Recessed Flip Handles. Option to add a Tour Dish. Stacking Plates. Option to add High Density 12.5mm Foam Lining or Carpet Line Internal Dimensions - (1000 x 500 x 500mm) External Dimensions...

SATA 3.0 compatible with transfer rates up to 6 Gbps! Designed to replace the SCSI parallel interface with a much faster, more flexible, 6 Gbps serial interface while maintaining the robust nature of the SCSI command set. The flexibility of SAS facilitates many system-level configurations such as workstations, blade servers, external storage arrays, SAS expanders, host bus adapters (HBAs) and RAID controllers.

Technical details Product Description HP network cable - 50 cm Type Network cable - OM3 Technology Fibre optic Type of Fibre Optics Multimode Length 50 cm Core / Cladding Diameter 50 / 125 micron Connector(s) 2 x LC multi-mode - male Connector(s) (Other Side) 2 x LC multi-mode - male Designed For Brocade 4Gb SAN Switch; 8Gb SAN Switch; Cisco MDS 9124e; ProLiant DL360e Gen8; StorageWorks 8/20q, 8/8, 8Gb, MSL2024, MSL4048, MSL8096, SAN Switch 8/24, SAN Switch 8/40, SAN Switch 8/80, SN6000...

More Information Product Overview SummarySATA 3.0 compatible with transfer rates up to 6 Gbps! Designed to replace the SCSI parallel interface with a much faster, more flexible, 6 Gbps serial interface while maintaining the robust nature of the SCSI command set. The flexibility of SAS facilitates many system-level configurations such as workstations, blade servers, external storage arrays, SAS expanders, host bus adapters (HBAs) and RAID controllers. Product FeaturesCables To Go 0.5m SAS 32-pin...

Cable colour Black. Cable length 0.5 m. Gender type male/male. Source data-sheet Icecat.biz.

For use with SAS/SATA HBAs (Host Board Adapters) and external drive housings Latch type SFF-8088 (4x) to latch type SFF-8088 (4x) connectors SAS (Serial Attached SCSI) compliant Fully compliant with SATA II specifications (Electrical Specifications section 6.6) Full duplex communication up to 3Gb each direction/channel Colour: Black 10 Year warranty

Description : Refurbished 0.5-meter HDT S68 SCSI Multi-Mode cable; 5183-2670 Weight 0.45 lbs. More Product Info on C2978B

For use with SAS/SATA HBAs (Host Board Adapters) and external drive housings Thumbscrew type SFF-8470 (4x) connectors on both ends SAS (Serial Attached SCSI) compliant Fully compliant with SATA II specifications (Electrical Specifications section 6.6) Full duplex communication up to 3Gb each direction/channel Warranty: 10 years

SATA 3.0 compatible with transfer rates up to 6 Gbps! Designed to replace the SCSI parallel interface with a much faster, more flexible, 6 Gbps serial interface while maintaining the robust nature of the SCSI command set. The flexibility of SAS facilitates many system-level configurations such as workstations, blade servers, external storage arrays, SAS expanders, host bus adapters (HBAs) and RAID controllers.

Details CX4 Infiniband cables follow the IEEE 802.3ak 10Gb Ethernet standard. They provide superior signal fidelity over long distances and are highly flexible. Each cable uses the Infiniband 4X connector to maximize signal strength and can support data transfers of up to 10 Gigabits per second.

This external eSATAp cable integrates both data and power signals into a single lead. It connects an external SATA hard disk or similar device to an eSATAp port. It can connect both 2.5" and 3.5" hard disks as it provides both +5VDC and +12V DC so can be used with both desktop and laptop computers (see note below). This cable is compatible with the latest generation of computers and interface cards that support power over eSATA. The cable may be used in conjunction with our 2 Port Power over eSATAp...

Product Description Created for connections to external storage and backup devices, as well as with notebooks and servers Improving performance for external storage Features * Lifetime cable warranty Specification * Connectors: ESATA to ESATA

HEWLETT PACKARD JD641A Designed for exact compatibility with HEWLETT PACKARD product, HEWLETT PACKARD accessories ensure maximum performance, longevity and ultimate cost-effectiveness. HEWLETT PACKARD accessories are an integral part of the fundamental design of communication product, combining with other key elements of their design to deliver optimum durability.

Description CablesToGo SAS Multilane Cable 0.5m Red SFF-8484 Male to 4x SATA Male SATA 3.0 compatible with transfer rates up to 6 Gbps! Designed to replace the SCSI parallel interface with a much faster, more flexible, 6 Gbps serial interface while maintaining the robust nature of the SCSI command set. The flexibility of SAS facilitates many system-level configurations such as workstations, blade servers, external storage arrays, SAS expanders, host bus adapters (HBAs) and RAID controllers. ...

Description CablesToGo SAS Multilane Cable 0.5m Red SFF-8484 Male to SFF-8484 SATA 3.0 compatible with transfer rates up to 6 Gbps! Designed to replace the SCSI parallel interface with a much faster, more flexible, 6 Gbps serial interface while maintaining the robust nature of the SCSI command set. The flexibility of SAS facilitates many system-level configurations such as workstations, blade servers, external storage arrays, SAS expanders, host bus adapters (HBAs) and RAID controllers. Specification...

Description CablesToGo SAS Multilane Cable 0.5m Blue SFF-8484 Male to SFF-8484 SATA 3.0 compatible with transfer rates up to 6 Gbps! Designed to replace the SCSI parallel interface with a much faster, more flexible, 6 Gbps serial interface while maintaining the robust nature of the SCSI command set. The flexibility of SAS facilitates many system-level configurations such as workstations, blade servers, external storage arrays, SAS expanders, host bus adapters (HBAs) and RAID controllers. Specification...