Lush Longboard Skateboard Trucks --165mm Old School : 28 results priced between £25.00 and £5,000.00

The Generator is a great all round carve setup. It features a 44" long, 9.9" wide deck that's constructed with 7-ply and x-flex (super nice flex), dropped through Sabre trucks and Cult Gamma Ray wheels that are loaded with abec 7 bearings to ensure that the speed is generated. A lower ride means easier slides and more stability, comfortable footbraking and easier pushing too. The mini kicktail helps out on that commute and the chrome finish artwork by Phil Harvey set's this deck off nicely. The Generator...

Fast, responsive and drifty, classic curves and a short pintail. Set up with Sabre trucks and 70mm Magma wheels, the Mako is ready to seduce hills, with top end parts at an affordable price. Just begging to be pushed into hard carves and fast turns, at 9” wide and 44” long there is plenty of room to get comfy and carve sharp lines like an intellectual shark. It carves, cruises, slides, pumps and rips all over anything you put in front of it.

Details Versatility is not something commonly associated with trucks - until now. These trucks are not only a solid skate truck for standard double kick boards. They double as a sweet super-tight turning mini longboard truck perfect for boards around 35" and shorter. Designed for our Old School Pool decks and Cruisers like the Mad Dog and the Fibreflex 28, these trucks suit a wide range of boards as they have great turn and are super strong. Get some and shred, jump stairs, curbs and carve down...

Construction: 8-ply 100% Canadian Maple; Flex: stiff; Width: 9''/23.5cm; Length: 34.5''/87.6cm; Wheelbase: 19.88''/50.5cm - 24.83''/63cm; Nose: 2.84''/7.2cm; Tail: 1''/2.7cm - 6.4''/16.3cm; Concave: 0.625''/1.6cm; Max Weight: 16st / 100kg / 225lbs; Profile: front loaded rocker with a kicktail/gas pedal; Drilled tail to allow a slalom rear truck setup with a gas pedal; Rounded kicktail ideal for ollies and manuals; Adjustable front and back wheelbase; Graphics by Jethro Haynes; :: Unisex > Skateboards

A midsized topmount speedboard the Antuna is a guest board for a legend Manu Antuna. Manu rips and this board can help you rip too! The topmount short wheelbase gives greater grip and a sharper turn, the 4X construction keeps the deck super stiff. The standing platform is probably the stand out feature of this shape. Use of a specially designed rocker mould combined with a cuning shape gives a concave difference front to back - it's mellower at the front to match the width, and steepr at the back...

The Lopez is an amazing board for cruising the street but can still handle a decent bit of speed. We decided to add a double wheelbase on this board so you can either set it on the long wheelbase (as supplied) for a more flexy but stable ride or shorten it so you have a decent length kicktail for more trick/surf style riding and reduced flex pattern.

With 4X we use two layers of Bi-Axial Wet Laminate Glass, one layer in from the surface of the layup as per X-Flex, but the top layer of glass (closest to the grip tape) is laid at 45 degrees to the length of the deck providing less torsional flex.

With 4X we use two layers of Bi-Axial Wet Laminate Glass, one layer in from the surface of the layup as per X-Flex, but the top layer of glass (closest to the grip tape) is laid at 45 degrees to the length of the deck providing less torsional flex.

The Generator will do it all - if you're cruising around, carving down a huge mountain or just rolling to work, you won't find a smoother and more complete off the shelf longboard setup.

4X Construction, Similar in many ways to X-Flex, but instead designed for skating fast and holding lines through corners. With 4X we use two layers of Bi-Axial Wet Laminate Glass, one layer in from the surface of the layup as per X-Flex, but the top layer of glass (closest to the grip tape) is laid at 45 degrees to the length of the deck providing less torsional flex. The deck now has fibres running diagonally across the deck, adding stiffness. This translates to better tracking in corners, an ultra...

Habitat Sugar Skull Cruiser Setup Back to basics for old style smooth riding, but with a few new era comforts such as tough griptape and twin kicked nose and tail. Bowl rider shaped Habitat deck (7.875" width) comes ready to ride with a matching set of habitat softy wheels (54mm), a set of Reflex Hornet trucks and Reflex abec 3 bearings. Voodoo powers not included.

Details Sweet little boards need sweet little trucks, These aren't small, they're fun sized. Renovate your old minis and old school boards with these 3" beauties and they'll get you turning tighter and carving harder than any other truck we sell - we'll even throw in the washers. Just keep in mind at 3" wide they won't suit every board but they go extremely well on pocket cruisers of all makes and models. Check out Dan Hodgson hand-standing on a Vault FibreFlex 23" with these sweet little trucks...

Full design printed on both sides. Made from 5 ply canadian maple, 2 ply (top and bottom) bamboo maple. 7" light longboard truck stonefinished. PUC cushions green 80a. Black kingpin, black washer, black hexagon screws, 4mm pads. "Sugar Grip" covered deck traction. USA PUC SHR 78a Black Wheels 69mm x 55mm. Abec 5 chrome bearings. Fun for riders and skaters of all ages and abilities.

Material: Canadian Maple ply, ABEC - 7 bearings, 70mm trans wheels, 5" aluminium trucks, black grip tape Size: 41" Weight: Approx 3.5 Kg 43" x 9" decks 2 assorted designs Deck comes in cellophane with description card

Paris Adam Colton Skateboard Trucks are your quality carving machine with original Adam Colton artwork on the hanger, with slick black bushings. The artwork on these Paris trucks are abstract, all blending together, drawn by hand and then transferred on to these longboard Trucks.

Paris Raw on Raw Skateboard Trucks are available in 150, 180mm & 195mm hanger sizes. The first longboard trucks to have 6 hole base plate mountings. The Axles & kingpins are made from Grade 8 steel, contain s special Urethane formula in the bushings, providing for ultimate rebound and vibration dampening. The Kingpins on these longboard trucks are set at 50 degrees

The classic oldschool truck is back! Poured from the original moulds, these re-issues look and ride just like you remember.

Riviera Longboards Grateful Shred 29" Cruiser Skateboard Riviera completes are factory assembled with trucks, wheels, bearings, hardware and grip tape. Basically open the box and you are ready to go.

Paris Black on Black Skateboard Trucks are available in 150 & 180mm hanger sizes. The first skateboard trucks supplied with 6 hole base plate mountings. Axles & kingpins are made from Grade 8 steel, contains special Urethane formula in the bushings, providing for ultimate rebound and vibration dampening. The Kingpins on these longboard trucks are set at 50 degrees

Thunder 'Super Pivots' Pivot Cups2 CupsBlackEnough for 2 TrucksFit most skateboard trucksWon't wear down easilyIs there anything else you can say about pivot cups?

9 ply Canadian maple Deck measuring 41.25" x 9.5" / 105cm x 24cm 7in / 18cm heavy duty aluminium trucks and base ABEC-9 chrome bearings with oil filled rubber seals for enhanced performance 70mm x 50mm PU cast wheels Black non-slip grip tape

Your little skateboarding protege can only learn so much from sport shop setups with spray on grip, rubber wheels and plastic trucks. The World Industries junior setups are constructed to the same specifications as their full size counterparts, so it'll last more than 5 minutes even in the hands (or feet) of the most adventurous little ripper. The deck is made from 6 plys of 100% canadian hard rock maple with a top layer of triaxial epoxy glass, making it light-weight yet strong and durable. It's...

44" FibreFlex Pintail deck has both concave with camber and it comes with the custom cut FibreFlex griptape and has Randal R2 50 Degree 180mm trucks with classic kryptonic 78A 70mm wheels.

Native Skate Store carries everything from skate decks and hardware to skate shoes and clothing, all from a huge range of skate brands such as, Almost, Blind, AlienWorkshop, Habitat, Real, Antihero, Spitfire, Thunder Trucks, Tensor, Ricta, Hubba, Etnies, Es, Emerica, Fallen, Nike SB, Zero, Lakai, Destructo, Mystery and many, many more.

Classic Santa Cruz Cruzer on a clean pintail shape. Equipped with Bullet Cutback reverse kingpin trucks and high rebound performance cushions. 65mm Trans Blue Road Riders with High-Rebound 78A urethane, spray on grip.

23" by 6" wide. 7 ply Canadian maple deck. 59mm 78a polyurethane wheels. 6.875 forged trucks with 90a bushings. Free stickers, sunnies and keyring with every board. Sweet rasta colours.

Longboards & Cruisers Longboards are super popular right now. Whether it's for racing down the steepist hill you can find, or cruizing to the beach / beer shop, longboarding is one of the funest ways to get around. We stock a wide range of longboards such as loaded, lush, arbor, Never Summer, Arbor, Globe, Urban blue and many more. Some of our longboards are super cheap and some are the highest quality you can get, so whatever type of longboards you need we will have them. We offer free delivery...