Myryad : 35 results priced between £200.00 and £2,000.00

* Tuning range: 87.5 - 108.0MHz. * Usable sensitivity: (IHF mono) 2.0 µV. * Signal/Noise ratio: 78dB (mono) 72dB (stereo). * THD (1kHz): 0.1% (mono) 0.2% (stereo). * Tuning Range: 522 - 1620kHz. * Signal/Noise ratio: 50dB. * THD: 1.0%. * Dimensions (w x h x d): 436 x 95 x 343mm. * Fascia: 9mm anodised bead blasted aluminium in anodised Silver.

As you would expect, everything about ZSeries sounds as good as it looks. Exemplifying all that's best about Myryad's conscientious approach to acoustic engineering, seven separately regulated power supplies, enhanced DAC decoupling and generous reservoir capacitors deliver superior bass clarity and impact, ultra-wide soundstaging and brilliant mid-range focus and detail, lithe and sleek to look at, crisp and clean to listen to. Pure performance.

The Myryad MXV 4000 DVD-Video Player has been designed to offer a combination of high quality sound reproduction and elegant styling in keeping with other Myryad products. The MXV 4000 is a full-function remote controlled DVD-Video player. It has fixed-level low-impedance audio outputs to drive a Myryad pre-amplifier or integrated amplifier or other high quality amplifier. Video outputs are provided in composite, S-video and component form and can be fed to an audio-video preamplifier , amplifier...

Up to 7 modules can be installed in one chassis, in any combination of 1x 150W and 2x 80W modules, so one fully loaded chassis

* Digital-Analogue Converter: 24-bit 192kHz delta-sigma with Dynamic. * Regulated power supplies: Fourteen, each purpose designed. * Audio Filter op-amps: Two single high speed low-noise Difet types. * Audio output: DC-coupled, individually trimmed. * Frequency response: (20Hz-20kHz) ±0.2dB. * THD (1kHz): 0.0018%. * Signal/Noise ratio (A-weighted): 112dB. * Output level at 0dB: 2.3Vrms. * Digital output: Coax 75O to SPDIF std. * Fascia: 9mm anodised bead blasted aluminium in anodised. ...

* Inputs: 6 Stereo analogue, 4 Digital only (plus video if assigned), 7.1 Multichannel. * Outputs: 1 Stereo tape record,. * Other: 2 My-Link input/output, 3 12V DC trigger outputs (three independent. * Processing capability: Dolby1 Digital, Dolby Digital EX, DTS2, DTS 96/24,. * Dimensions (WxHxD): 436 x 95 x 343mm.

The Myryad MXP2000 Stereo Preamplifier has been designed to deliver a combination of high quality sound reproduction and elegant styling. 9mm Anodised bead blasted aluminium fascia. 8 inputs: Line Direct, Tape, CD-R, CD, Tuner, TV, DVD, Aux. Smart My-Link input/output connection to link to other Myryad equipment.

The Myryad MXI2150 is a powerful, mighty, amplifier that offers an effortless and neutral performance - available in black or silver. Weighing in at 22kg, with a 9mm bead blasted anodised aluminium front panel, build quality is impressive. Even more so are the specs on paper, with continuous power rated at 150W (into 8 ohms), enough to drive most speakers with ease. This model features a "Smart My-Link" connection, allowing you to control and link it to other Myryad equipment.

The Myryad shows a fine unity of sound, too, with decent solidity to the low frequencies, crisp attack to treble sounds and smooth integration of the entire frequency range. In terms of balance, poise and dexterity,

The Myryad MX Modular Power Amplifier has been designed to provide a flexible solution to a wide range of power amplifier requirements. As a two-channel unit it can be partnered with the Myryad MXP2000 stereo preamplifier (or other high quality preamp) to deliver audiophile quality stereo. In multi-channel form it can be used to provide power for high quality Home Cinema or music surround systems when partnered by a suitable surround preamplifier-processor such as Myryad's MXD4000. It can also be...

* Continuous rated power output, stereo 8O: 80W 4O:120W. * THD: @ 80% rated power, 8O, 20Hz - 20kHz: 0.02%. * Signal/Noise ratio: (A-weighted, ref 80W): >116dB. * Input sensitivity: (ref 80W): 900mV. * Input impedance: 60kO/440pF. * Frequency response (20Hz -20kHz): ±0.2dB (-2dB @ 96kHz). * Dimensions (w x h x d): 436 x 95 x 355mm. * Weight (net): 10.2 kg. * Fascia: 9mm anodised bead blasted aluminium in anodised.

* Continuous rated power output, stereo 8O: 80W 4O:120W. * THD: @ 80% rated power, 8O, 20Hz - 20kHz: 0.02%. * Signal/Noise ratio: (A-weighted, ref 80W): >116dB. * Input sensitivity: (ref 80W): 900mV. * Input impedance: 60kO/440pF. * Frequency response (20Hz -20kHz): ±0.2dB (-2dB @ 96kHz). * Dimensions (w x h x d): 436 x 95 x 355mm. * Weight (net): 10.2 kg. * Fascia: 9mm anodised bead blasted aluminium in anodised.

The Myryad shows a fine unity of sound, too, with decent solidity to the low frequencies, crisp attack to treble sounds and smooth integration of the entire frequency range. In terms of balance, poise and dexterity,

The Myryad MXP2000 Stereo Preamplifier has been designed to deliver a combination of high quality sound reproduction and elegant styling. 9mm Anodised bead blasted aluminium fascia. 8 inputs: Line Direct, Tape, CD-R, CD, Tuner, TV, DVD, Aux. Smart My-Link input/output connection to link to other Myryad equipment.

The RDS equipped Z132 offers audiophile quality access to modern broadcasting. At the same time, as one of the many delightful yet practical touches made possible by Myryad's ingenious Smart My-Link, the Z132's convenient in-built clock alarm even lets you choose whether to wake up to radio or CD. Elegantly styled and simple to use - tuneable manually, through auto-search, or any of its 29 presets - the Z132 combines exceptional selectivity with clarity, warmth and ambience. Pure class.

The RDS equipped Z132 offers audiophile quality access to modern broadcasting. At the same time, as one of the many delightful yet practical touches made possible by Myryad's ingenious Smart My-Link, the Z132's convenient in-built clock alarm even lets you choose whether to wake up to radio or CD. Elegantly styled and simple to use - tuneable manually, through auto-search, or any of its 29 presets - the Z132 combines exceptional selectivity with clarity, warmth and ambience. Pure class.

* Continuous rated power output:. * Inputs: Tape 1, Tape 2, CD, DVD, Tuner, Phono. * Signal/Noise ratio (A weighted, ref. 50W):102dB. * Input sensitivity (ref 50W): 250mV. * Frequency response (20Hz - 20kHz): ±0.3dB. * Dimensions (WxHxD): 436 x 78 x 316mm. * Weight (net): 6.7 kg. * Natural Silver fascia with Silver-Grey casing or Satin.

* Continuous rated power output:. * Inputs: Tape 1, Tape 2, CD, DVD, Tuner, Phono. * Signal/Noise ratio (A weighted, ref. 50W):102dB. * Input sensitivity (ref 50W): 250mV. * Frequency response (20Hz - 20kHz): ±0.3dB. * Dimensions (WxHxD): 436 x 78 x 316mm. * Weight (net): 6.7 kg.

Enjoy even better performance from your integrated amplifier by adding this stereo power amplifier and bi-amping - available in Black. Adding a power amplifier to your existing integrated amplifier (providing it has a "Pre Out") should offer enhanced dynamics, even greater transparency and heightened bass. A serious system upgrade.

Enjoy even better performance from your integrated amplifier by adding this stereo power amplifier and bi-amping - available in silver. Adding a power amplifier to your existing integrated amplifier (providing it has a "Pre Out") should offer enhanced dynamics, even greater transparency and heightened bass. A serious system upgrade.

Smart My-Link input/output connection to link to other Myryad equipment.

Smart My-Link input/output connection to link to other Myryad equipment.

Myryad Z114 CD Player.The Z-Series CD Player sounds as good as it looks with seven separately regulated power supplies, enhanced DAC decoupling and generous reservoir capacitors deliver superior bass clarity and impact, ultra-wide soundstaging and brilliant mid-range focus and detail. The Z114 has been introduced to

Myryad Z114 CD Player. The Z-Series CD Player sounds as good as it looks with seven separately regulated power supplies, enhanced DAC decoupling and generous reservoir capacitors deliver superior bass clarity and impact, ultra-wide soundstaging and brilliant mid-range focus and detail. The Z114 has been introduced to

Description Specification Reviews 9mm Anodised bead blasted aluminium fascia 7x 150Wpc 8ohms Up to 7 modules can be installed in one chassis, in any combination of 1x 150W and 2x 80W modules, so one fully loaded chassis can deliver 7x 150W or 14x 80W or any combination between Five separately-regulated power supplies for each amplifier channel Each 150W module uses Vishay bulk-foil and 0.1% tolerance feedback resistors Each module has its own processor monitoring temperature, output current and...

The Myryad Mi is a totally new digital stereo hi-fi design offering CD, DAB, FM and iPod listening in a single unit.It has been styled to be sleek and elegant so that it does not need to be hidden away. Digital technology has been used to deliver outstanding audio performance from a relatively modest footprint.

The Myryad MXT4000 is a full­function remote controlled AM/FM Tuner, offering excellent sound from traditional analog radio broadcasts. It has fixed­level low­impedance audio outputs to drive a Myryad integrated amplifier or pre­amplifier ­ or other high quality amplifier. A coaxial antenna socket is provided for a 75 ohm FM radio (band 2) anetena (supplied).

- Inputs: 6 Stereo analogue, 4 Digital only (plus video if assigned), 7.1 Multi-channel analogue (pure analogue bypass), 8 Digital (4 coax, 4 optical) - each assignable to any of 10 inputs, 6 Composite video - each assignable to any of 10 inputs, 4 S-Video - each assignable to any of 10 inputs, 3 Component video (HDTV compatible) - each assignable to any of 10 inputs, 3 HDMI digital video - each assignable to any of 10 inputs

The Myryad MXI2150 (available on 0% finance) is a powerful, mighty, amplifier that offers an effortless and neutral performance - available in black or silver. Weighing in at 22kg, with a 9mm bead blasted anodised aluminium front panel, build quality is impressive. Even more so are the specs on paper, with continuous power rated at 150W (into 8 ohms), enough to drive most speakers with ease. 

Myryad MXI2080 stereo integrated amplifier (available on 0% finance) has been designed to deliver a combination of high quality sound reproduction and elegant styling, available in black or silver. With 80W on tap (into 8 ohms) and a selection of 8 inputs, it's as flexible as it is powerful. 

Myryad MXV 4000 DVD Player (available on 0% finance) has been designed to offer a combination of high quality sound reproduction and elegant styling in keeping with other Myryad products. The MXV 4000 is a full-function remote controlled DVD-Video player. It has fixed-level low-impedance audio outputs to drive a Myryad pre-amplifier or integrated amplifier or other high quality amplifier. Video outputs are provided in composite, S-video and component form and can be fed to an audio-video preamplifier...

All the audio stages in the MXC7000 are DC-coupled to ensure the most accurate signal path. Any residual DC on the output is trimmed out by manual adjustment of each channel during production. The alternative approach, using a DC servo, introduces additional active and passive components into the audio signal chain, and so always produces some degradation of the audio signal, however small. Myryad's trimmed DC offset technique eliminates this degradation and results in a dramatic improvement in...

Myryad A170 speakers are Q Acoustics engineered to sound stunning with looks inspired by the high end Myryad Mi hi-fi system, designed to delight even the highest of expectations. Indeed Myryad brand manager Alex Munro at distributor Armour comments, 'the bi-wireable, two-way reflex design combines deep, powerful bass with sweet, accurate treble'.

Enjoy even better performance from your integrated amplifier by adding this stereo power amplifier and bi-amping - available in black or silver. Adding a power amplifier to your existing integrated amplifier (providing it has a "Pre Out") should offer enhanced dynamics, even greater transparency and heightened bass. A serious system upgrade.