NOBO GCH Temperature Control Module R80 ZSE - 227E
Standard thermostat for LST Heaters. A control module with fixed 16°C. economy (set-back) setting, supplied with pilot wire for dual temperature applications. Adjustable comfort temperature up to 24°C.
2008 BMW 5 SERIES E60 SALOON BODY CONTROL MODULE 61359176069
ALL PARTS ARE COVERED BY A 3 MONTH PARTS WARRANTY AS STANDARD WITH AN EXTENDED WARRANTY AVAILABLE UPON REQUEST AT AN EXTRA CHARGE. PLEASE PHONE US TO ARRANGE THIS. THESE PARTS ARE USED SO PLEASE BE AWARE THAT THEY MAY BE MARKED/SCRATCHED, PLEASE CHECK THE PICTURES AS ANY DAMAGE WILL BE HIGHLIGHTED.
CS Series - Process ControlModules : PID ControlModules
Performs Heat (Reverse), Cool (Direct), or Heat/Cool (Reverse/Direct). Universal Inputs Accept B, C, E, J, K, R, N, S, and T Type Thermocouples, 100 Ω 385/392 and 120 Ω 672 Type RTDs (2- or 3-wire), 0 to 10V and 0/4 to 20mA Signals. Hot-Swappable Replacement Reduces Downtime. Auto Addressing Minimizes Configuration Time. Fully Isolated Design Provides Reliable Operation. PID Control with Reduced Overshoot. On-Demand Auto-Tuning of PID Settings. Discrete Outputs Available in Relay, Triac, or...
FE FA5511 FA5511P DIP-8 FA551X series FUJI Power Supply Control IC
Low current consumption by CMOS process with high dielectric strength (30V). Standby current of 2μA or less (at Vcc=14V), and operating current of 1.5mA (typ). Overvoltage protection function detecting the Vcc voltage. A drive circuit for connecting a power MOSFET directly. Output peak current: ±1.5A. Pulse-by-pulse overcurrent limiting function. Overload protection function (latch or non-latch mode selectable). Output ON-OFF function by external signal. Latch-mode overvoltage shutdown function...
Aquacomputer Aqualis 1/4" Thread Compact Pump & Control Module 600 Standard : 41098
When used without an aqualis series reservoir , G1/4 inlet threads for fittings can be used on the top and side of the pump module, the pressure side is always connected to a G1/4 port on the side. The unused inlet thread can be sealed with a G1/4 sealing screw supplied with the pump module.