New pair of 600 watt speakers,amp & mic : 54 results priced between £100.00 and £1,500.00

Fischer Amps Shaker Amp 400 Kit 1 containing Buttkicker Concert: 2 Ohms, frequencyrange: 5 - 200 Hz, power: 400 W min. up to 1500 W, weight: 5 kg, Shaker Amp 400: 19" Mono amplifier, 600W @ 2Ohm, 400 W @ 4 Ohms, Inputs: Mic. / Line XLR/Jack combi input, balanced with XLR Link-Out, balanced jack 6,3mm In / Out, outputs: Speakon-Out, Binding Post, crossover (active): switchable, bass adjustable 40 - 200 Hz, 12dB/Okt, switchable highpass 20Hz, 12 dB/Okt, incl. holder for Buttkicker Microphones / Wireless...

100V/70V. Preamplifier 0.775V/100Ω. Record 0.775V/3kΩ. Frequency range 55-16,000Hz. Tone control - Bass ±10dB/100Hz Treble ±10dB/10kHz. S/N ratio Mic > 70dB, 'A' weighted. Line > 80dB, 'A' weighted. THD < 1%. Admiss. ambient temp. 0-40 °C. Power supply 230V˜/50Hz/1,700VA,. 24V DC current /50A.

The XR 8600 powered mixer includes many of the latest technological developments from Peavey engineering. Incorporating a pair of 600 Watt amplifiers, dual 7-band EQ, digital effects, FLS® (Peavey's award-winning Feedback Locating System), DDT™ speaker protection and a host of other features, these compact powered mixers are perfect for any application.

Mixing channels: 4 Mono + 4 Stereo +Return. AUX: 1 (Effect Send). MAIN: Stereo. Input channel functions: CH1-4 Compressor; 3-band PEQ; CH5-8: 3-band PEQ. On-board processors: SPX, 2x 7-band GEQ, YSProcessing. Mic inputs: 8. Phantom power: +15V DC; ON/OFF. Line inputs: 4x Stereo. Control and others: Foot switch, StandBy (All mute). Maximum output power @4ohms: 300W/ch. Maximum output power @8ohms: 180W/ch. Load protection: Power switch on/off mute, DC-fault (power supply shutdown/manual...

1200 watts peak per pair. 600 watts RMS per pair. Kraft Pulp Cone. Rubatek Foam Surround. Pressed Steel Basket. 4-layer Copper Voice Coil* FEA Optimized Motor Structure. Double Stack Magnets. Linear Spiders. Foam Gasket. Mounting Depth - 6.75". Mounting Hole Diameter - 13.75". Overall Diameter - 15.5". Bolt Hole Circle - 14.75". Motor Width - 6.25". Motor Depth - 2.5". Basket Depth - 4.25". Displacement - 0.16 cu. ft. Weight - 17.5 lbs. QES: 0.45. QMS: 4.87. QTS: .41. Free air...

Peavey XR8300 8 Channel 600 Watt Powered Mixer Amp Featuring new improved low noise mic preamps, multi point clip sampling and a new subsonic filter to prevent low frequency power robbing. New graphic equalizers have multi-Q bandwidth to allow some filters to perform feedback control while others perform tone control and have Peavey's patented FLS (Feedback Locating System). Features 2 x 300 watts per channel at 4 ohms.  8 channels with 8 low noise microphone (Low-Z), 6 line level (Hi-Z) and...

Peavey XR8600 8 Channel 1200watt Powered Mixer Amp Featuring new improved low noise mic preamps, multi point clip sampling and a new subsonic filter to prevent low frequency power robbing. New graphic equalizers have multi-Q bandwidth to allow some filters to perform feedback control while others perform tone control and have Peavey's patented FLS (Feedback Locating System). Features 2 x 600 watts per channel at 4 ohms.  8 channels with 8 low noise microphone (Low-Z), 6 line level (Hi-Z) and...

The Alto Truesonic TS110A is an amazing 10 inch Active speaker from Alto Professional Audio. The Alto TS110A gives an amazing 300 watts RMS music power, which is amazing for such a small speaker. The TS110A is perfect for small functions and background music. The Alto TS110A is so versatile as it has 2 microphone/Line inputs this is perfect for speeches and also an XLR link output so you can link another active TS110A. We love this product here at phase one and for performance and value we give this...

Peavey XR 1212 12-Channel Powered Mixer Amp Designed with 12 reference-quality XLR microphone input channels and five operation modes, the console-style XR 1212 is a versatile powered mixer. Two power amps rated at 600W each make it easy to configure for Left &amp; Right; Left &amp; Right with Subwoofer (including fourth-order 100 Hz crossover); Main &amp; Monitor; Main &amp; Monitor with Subwoofer; or Monitor 1 and Monitor 2. Features 12 XLR mic channels.  Dual 600-watt, lightweight Class D amps (4 ohms). ...

Peavey XR 1220 20-Channel Powered Mixer Amp Designed with 20 reference-quality XLR microphone input channels and five operation modes, the console-style XR 1220 is a versatile powered mixer. Two power amps rated at 600W each make it easy to configure for Left &amp; Right; Left &amp; Right with Subwoofer (including fourth-order 100 Hz crossover); Main &amp; Monitor; Main &amp; Monitor with Subwoofer; or Monitor 1 and Monitor 2. Features 20 XLR mic channels.  Dual 600-watt, lightweight Class D amps (4 ohms). ...

Product Description: SORRY NOW SOLD Application: Fullrange Cabinet / Satellite Output Power: 600 Watt Speaker Output for Extension Cabinet Mic and Line Input Extended Bass Response for Music, Keyboards Live Bands Entertainers Etc Sporting a 15" woofer, this cab delivers performance on par with the PR:O 12, plus enhanced low-midrange and bass response compared. And that makes it a great choice for stand alone deployment without a subwoofer. The active PR:O 15 A model also features 600 watts power...

The OPERA 605 D cab has a lot going for it - a 600-watt digiproÆ power amp, a muscular 15ì neodymium woofer for punchy low-end response, a premium-grade neodymium driver with a 1.4 titanium voice coil for crystal-clear top end, an integrated DSP, and a switched-mode power supply. It is not only the flagship of the OPERA DIGITAL series, but also the top model in this entire class of enclosures.

Speaker Type: 2-Way Active Speaker. Frequency Response (-10 dB): 45Hz - 20kHz. Max SPL: 128 dB. HF: 1-inch. Directivity: 90/70x60°. Horn: Asymmetrical CD Horn. LF: 15-inch. Amp Class: Class D. Power PRG: 600W. Cooling: Convection. Controller: DSP 24bit/48kHz. Limiter: Dual Active Peak, RMS and Thermal. Crossover Frequency MF-HF: 1.9kHz. Slope MF-HF: 24 dB/Octave. Signal Input: 1x XLR/1x 6.3mm phone jack. Input Sensitivity (dBu): -40 dBu. Microphone Input: Yes. Power Socket: VDE....

XLS Series amplifiers are professional stereo power amplifiers engineered to meet demanding audio requirements reliably and within budget. Plus, every XLS Series amplifier is backed by Crowns unequaled Three-Year, No-Fault, Fully-Transferable Warranty that covers everything. With over five decades of experience designing and building rock-solid products, Crown is the standard in amp technology. So check out the affordable, Crown XLS Series. They are a powerful argument for quality and value!

Front Mounted HiZ Guitar input. Front Mounted Headphone output. Direct Send Jack (with Ground Lift). Return Jack (with Ground lift). Return Female XLR (with Ground lift). Motitor Output jack (with Ground lift). Footswitch Jack 1. Footswitch Jack 2. Midi In. Midi out. Midi Thru. S/PDIF Out. S/PDIF In. USB out. USB in. Network Port. Master Output Left XLR (one Ground Lift shared by mast outputs). Master Output Right XLR. Master Output Left Jack. Master Output Right Jack.

Highly efficient Class-H design. 2 rack space units. Only 35 lbs (16 kg). Complete protection package. Dynamic limiter. 2 X 900W 2ohms. 2 x 600w 4 ohms. 2 x 350w 8 ohms.

System type: 2-way processed active enclosure. Amplifier Continuous Power: 500 W + 100 W bi-amp. Input Impedance: LINE: 20 kohm balanced, 10 kohm unbalanced MIC: 2 kohm balanced, 1 kohm unbalanced. Frequency response: 45 Hz - 20 kHz. Input Sensitivity: LINE: 0 dBu / 0.775 V MIC: max -35 dBu. Maximum (peak) Output: 129 dB @ 1m. Low Frequency Device: 15" neodimyum woofer - 3" VC. High Frequency Device: 1" neodimyum compression driver. Crossover Frequency: 1600 Hz. Low frequency equalizer:...

FBT ProMaxX 12A Powered Active Speaker 2-way bi-amp 600W RMS + 300W - FTB Code - 33234 FBT ProMaxX 12A two-way bi-amplified speaker system has 1 x 12inch LF neodymium magnet woofer with 3inch voice coil custom made for FBT by B and C and 1inch exit throat B and C neodymium magnet compression driver with 1.4inch voice coil coupled to a 90deg H x 60deg V constant directivity horn Other Products By FBT

* 500W + 500W / 4 ohms stereo power amplifier (bridgeable and patchable) * 8 Mic/Line input channels with 3-band swept mid-range EQ and inserts * 2 stereo Line input channels with 3-band EQ * 2 stereo returns, each can be routed to AUX 1 &amp; 2 sends (effect to monitor) * Stereo 7-band graphic EQ * Dual 32/40-bit digital effect processors, each with 16 effects plus parameter control * Foot switch allows user to on/mute effect processor * 2 AUX sends, 2 EFX sends * Global...

RMS Power Output: 600-Watts Class-D. LF Driver: 2 x 10" ceramic, cast frame speakers. HF Driver: 1 x HF horn w/ Level control. Preamp: Tube (3 x 12AX7). Channel Switching:. Vintage B15 channel. Modern channel tones. Power Amp: Solid-State. Tone Controls: 3-Band EQ. Mid Tone Control: Style. Ultra High / Low switches: Yes. Compressor: Yes, variable. Line Out: Yes, tube-driven balanced XLR and unbalanced ¼" TS w/ Level control, Pre/Post EQ switch and ground lift. Effects Loop: Yes. Power...

The Elements EA600 power Amp module is housed in an enclosure similar to the mid/ high unit. The EA600 amp module delivers 600 watts of power at 4 ohms and can drive up to two passive E110 Sub subwoofers or one passive subwoofer with up to two E 435 mid/ high units or even one column with up to four mid/ high units. The power amp module is ventilated from the front. A rotary selector lets you choose a special EQ setting to match the number of connected E 435s and optimize the frequency response for...

Overview Why Car Audio Plus? These Reference Fit amplifiers will satisfy the discerning mobile audiophile with its simple design and unyielding power. These amplifiers are built to be easily installed in the tightest applications yet they provide the power required to pump out the sound you want to hear. Features: 1600W maximum output power Built-in variable low-pass filter Built-in variable infrasonic filter Bass Boost control by remote 2 ohms load capability Dual Sigma Drive Dual power supply...

Class AB stereo power amp. 600W at 4 ohms. Bridged mono mode. Stable down to 2 ohms....

Front Mounted HiZ Guitar input. Front Mounted Headphone output. Direct Send Jack (with Ground Lift). Return Jack (with Ground lift). Return Female XLR (with Ground lift). Motitor Output jack (with Ground lift). Footswitch Jack 1. Footswitch Jack 2. Midi In. Midi out. Midi Thru. S/PDIF Out. S/PDIF In. USB out. USB in. Network Port. Master Output Left XLR (one Ground Lift shared by mast outputs). Master Output Right XLR. Master Output Left Jack. Master Output Right Jack.

I brought the In Phase IPS720I so I could play songs from my iPhone in my car. The unit arrived next day, was the cheapest around and worked perfect.

Power Output (RMS): 307W. Power Requirement: 230 / 115V. Speaker Configuration: 4 x 10' BlueLine speaker+ tweeter. Frequency Response: -3dB at 17Hz and 30KHz. Speaker Outputs: 2 x Jack Outputs. High Instrument Input: Impedance 3.9MOhms / Input range 150mV - 20V p-p. Low Instrument Input: Impedance 10KOhms / Input range 300mV - 40V p-p. Line Input: Impedance 22k Ohms / Input level 0dBu nominal. DI Output: 600 Ohms balanced / Level -20dBu nominal. Tuner Output: Impedance 22k Ohms, level 0dBu...

Amplifier Type : Generally a 2-channel (dual) amp is used for powering 2 speakers. A 4-channel (multi) amp will drive either 4 speakers, 2 subwoofers, or 2 speakers and a single subwoofer. Mono amps are designed specifically for low-frequency reproduction.Dual Channels

Autoleads PC4-25 PC425 600W Subwoofer AMP Wiring Kit

1000 watts @ 4 ohms. 600 watts @ 8 ohms. Preamp: Tube ( 1 × JJ 12AX7). Power amp: Class D. Tone controls: Bass, mid, treble. Mid-tone control: 5-position. Ultra low/high boosts. Onboard variable compressor. Transformer balanced line out. Includes removable rack ears. Power supply: Switching. Weight: 15.5 lbs / 7 kg.

Overview Why Car Audio Plus? Power Features Maximum Output Power: 600W 14.4V Rated Output Power (4 Ohm, 20 ~ 20 kHz), 1% THD : 2 x 100 W 14.4V Rated Output Power (2 Ohm, 1kHz), 0.8% THD : 2 x 150 W 14.4V Bridged Output Power (4 Ohm, 1kHz), 0.8% THD : 300 W 14.4V Maximum Output Power (4 Ohm, Bridged) : 600 W Features Highlights Built-in Low-pass Filter : 80Hz (-12dB/oct) Variable input sensitivity : 0.2 ~ 5 V Frequency response : 10 ~ 50 kHz Signal noise ratio < 100 dB Maximum current consumption...

SAMSON C CONTROL STUDIO CONTROLLER Provides a control room matrix previously available only on c...

This is a B-Grade but is basically a brand new product and still comes with a full manufacturers warranty. Unit may have been used for a demonstration New Condition apart from a small mark on bottom (underside base) The Peavey XR 1220 20-Channel Powered Mixer features patented Peavey technology and extensive digital signal processing. The Peavey XR 1220 20 Channel Powered Mixer is based on dual 600-watt, class D power amplifiers that can be configured into five operating modes: Left &amp; Right; Left...

600-Watt Bass Amplifier featuring a 7-Band Graphic Equalizer and Compressor