PEAVEY FOOTSWITCH FS 2 : 78 results priced between £10.00 and £1,000.00

Peavey FS 2 Valve King - original footswitch for Peavey Valve King series and 6505 - 112 combo, with LED

1/4'' (6.35mm) stereo phone plug. tip-ring sleeve phone plug allows for two simultaneous functions. Channel select switch button switches from saturation (distortion) to normal (clean) channel. Reverb button turns reverb effect on and off. 14 foot cable included.

Get the most out of your Peavey ValveKing or Windsor amp with this 2 button footswitch. Allows you to select amp channel and engage boost. LEDs indicate status.

Use with Transtube II Bandit and Supreme, Deltablues, Classic 30, Ecoustic and MarkVIII.

Peavey Footswitch for 5150II/6505Plus, FS 3-button, footswitch for 6505 Plus head and 6505 - 212 Combo

Peavey 3-Button Lead/Rhythm, Clean, Effect with LED's - 3120. Specifications use with 3120 Head three buttons lead/rhythm, clean and effect with LEDs seven-pin DIN plug

Superb valve tones for small gigs or mic it up for large gigs. 30 watts (rms) into 16 or 8 ohms. Four EL84s and three 12AX7s. 12 inch Blue Marvel(R) speaker. 2-channel preamp. Pre- and post-gain controls on lead channel. Normal volume control on clean channel. 3-band passive EQ (bass, middle, treble). Boost switch. Reverb level control. Effects loop. Footswitch selectable channel switching and reverb. External speaker capability. Chrome-plated chassis. Classic tweed covering. Footswitch...

Peavey 4-Button Overdrive/ Compressor/ Graphic EQ/ Mute - for the VB-3.

2 button footswitch for Peavey ValveKing guitar amp. The two button foot-switch has one button for channel selection and one button for boost on/off and each button has an LED indicator light built into the footswitch.

The Peavey Valveking/Windsor switch is designed for the Peavey Valveking and Peavey Windsor amps and combos.

Peavey Sampera 1 foot controller for Vypyr range of amplifiers (not Vypyr 15)

use with Stereo Chorus 212. 7-pin DIN, with 14'' (356mm) cable. LED indicator. Lead/Crunch selects Lead or Crunch channels. Bypass/Clean selects Clean channel. select Reverb defeats or activates internal reverb. select Chorus defeats or activates chorus.

Reference-style flat frequency response; ideal for room analysis and special recording applications Condenser element; omni-directional pickup pattern Frequency response: 20 hz to 20 khz; sensitivity: -37dbv/pa (14mv/pa) Rugged metal construction Includes hardshell carrying case

FS-2 Foot switch has been ergonomically designed to require less effort to operate. The hinge is under your heel instead of away from your foot as with most other foot switches. It can control two devices from a single operation. The two 10A microswitches are so mounted that one switch activates just before the other, very handy for keying a transceiver and linear amplifier.

Information Reviews (1) Delivery Specification Orange FS-2 2 Button Footswitch FS2 Tough Steel Casing with 2 LED indicators. For use with Thunderverb and Rockerverb Series. FeeFo Reviews Customer Comment Our Response Product: 13-Mar-2013 first one i got didn't work, but second one did and i've had no problems. Read more reviews on Feefo Feefo reviews 100% 1 This item is normally sent to Mainland UK addresses by DPD who generally provide a one-hour window of delivery on the morning...

Console style mixer/amp, 20 channels with XLR mic inputs plus stereo line inputs on channels 19 & 20, 60 mm faders, 4 band EQ with mid-morph technology, 2 monitor sends, 1 EFX send, pan pot, PFL and Mute switches. Dual 600W @ 4 ohm Class D power amps, 2 combo (Speakon and 1/4') connecters per amp channel, digital EFX (w/footswitch defeat and tap function). Auto EQ feature (with dedicated RTA input), Feedback Ferrets and digital graphic EQ's that are dedicated to each amplifier. Five power...

Replacement footswitch for Evh 5150 III, Fits all EVH 50 and 100 watt models, 4 buttons with LED indicators (ONE, TWO, THREE, EFFECTS), including 6 m, 6.3 mm mono cable, not suitable for Peavey! Guitars, Basses, Amps / Misc. Acessories

Quick Overview Specifications all-tube 30 Watts RMS into 16 or 8 Ohms two 10'' (254mm) Blue Marvel® speakers three 12AX7 preamp tubes four EL84 power tubes 1/4'' (6.35mm) input jack 2 channels preamp (selectable with push switch or optional 2-button footswitch) pre and post gain controls on boosted channel volume control on clean channel 3-band passive EQ reverb level tremolo intensity and speed effects loop chrome-plated chassis tweed cabinet push boost switch Dimensions (HxWxD...

- 100 watt TransTube® output section. - Two independent channels: Clean and Lead. - Two 12" Peavey Blue Marvel® loudspeakers. - Chorus with Depth and Rate controls, defeatable per channel. - Effects loop. - Footswitch jack for global effects defeat, volume boost and channel switching. - Genuine spring reverb and analog chorus. - Clean channel features 3 band EQ plus a Presence control. - Lead channel features 3 band EQ, Pre Gain control with Gain Boost, Mid Scoop and Post Gain.

30 watts (rms) into 16 or 8 ohms. Four EL84s and three 12AX7s. 12 inch Blue Marvel? speaker. 2-channel preamp. Pre- and post-gain controls on lead channel. Normal volume control on clean channel. 3-band passive EQ (bass, middle, treble). Boost switch. Reverb level control. Effects loop. Footswitch selectable channel switching and reverb. External speaker capability. Chrome-plated chassis. Classic tweed covering.

two multi-function expression pedals. 10 momentary selector buttons with LEDs. swappable expression pedals. dedicated tap tempo capabilities. looper control. bank increment/decrement functions. roadworthy cast-metal housing. high-quality metal switches. self-powered via MIDI. large LCD display. preset select or instant on/off effects operation. access virtually any VYPYR amplifier functions. On-screen tuner.

Peavey Footswitch cable, 7-pol DIN plug, fits all 5150, 6505, Triple XXX, JSX, EVH 5150, Fender Supersonic, RG-16 Looper/Switcher and RJM Amp Gizmo. Length: 6 meters.

FS-2 Foot switch has been ergonomically designed to require less effort to operate. The hinge is under your heel instead of away from your foot as with most other foot switches. It can control two devices from a single operation. The two 10A microswitches are so mounted that one switch activates just before the other, very handy for keying a transceiver and linear amplifier.

USB port to connect to a computer for recording or playing back digital audio to/from computer. Compatable with Win XP, ME and 2000. Built-in DSP effects processor. 1 x 6.3mm (1/4") jack socket output for separate Effects Send (can also be used as socket for optional footswitch for on/off of the internal effects). Ten RQ™ (reference quality) low noise microphone inputs with insert points. Channels 11/12 and 13/4 with dual switchable stereo line inputs. 3-band EQ on all channels. LED clip...

Peavey 1-Button Momentary action footswitch single non-latching footswitch 1/4'' (6.35mm) mono phone plug, with 15'' (381mm) cable

120 watts into 16, 8, or 4 ohms (switchable). Four EL34s and four 12AX7s. Power amp switchable to use EL34s or 6L6GCs (ships with EL34s). Three foot switchable channels. Clean channel: volume, bass, mid, treble. Rhythm channel: gain, volume, bass, mid, treble. Footswitch included. Lead channel: gain, volume, bass, mid, treble. Master volume. Footswitchable effects loop with send and return controls. Damping switch: tight, medium, loose. Line out with level control. Weight Unpacked: 5...

Peavey 3 Button Footswitch use with 6505 Plus head & 212 25' (7.67m) cable with 7-pin DIN Channel / crunch & Effect With LED's

Peavey 6505 Plus 112 Guitar Combo - 60W RMS into 16/8/4 Ohms (switchable), 1x 12" Sheffield 1200 speaker, 5x 12AX7 preamp valves & 2x 6L6GC power amp valves, 2-channel preamp (switchable on front panel or remote footswitch). Rhythm channel: pre/post gain, bright and crunch switches. Lead channel: pre/post gain. 3-band EQ per channel, presence and resonance controls, switchable post-EQ FX loop, preamp output, footswitch optional (order code: 107993). Dimensions: 648 x 567 x 285mm. Weight: approx 29kg

B-Stock, Peavey Valve King 112, guitar combo, 50watts/16ohm, 1x 12" valve king speaker, 2x 6L6GC and 3x 12AX7 tubes, two independent foot switchable channels, separate EQ for each channel, foot switchable gain/volume boost on lead channel, external speaker output, reverb with level control, effects loop, resonance switch for tighter/loose cabinet response, patent pending texture variable class A/B simulation control. Optional foot switch: 189024. Dimensions: 18,25" (464mm) x 21,38" (543mm) x 10,...

Peavey Bandit 112 guitar combo - 80watt (100watt with additional 8ohm speaker) 1x 12" Blue Marvel Speaker, 2 channel (clean and lead), 3 band EQ on each channel, modern/vintage voicing switch on clean channel, high gain/modern/vintage voicing switch on lead channel, reverb, effects loop, pre-amp out and power-amp in, external speaker out and connection for optional footswitch. Dimensions 603 x 511 x 295mm. Weight: 20.27kg.

Peavey Vypyr VIP 2, electric guitar combo, 40 W, 12" speaker, acoustic guitar and bass guitar simulation, 16 presets, 25 effects, 10 instrument models, 36 amp models, 6 bass amp models, 6 acoustic amp models, on-board looper (activated via optional Sanpera footswitch), 12 stompbox models, wah, reverb & delay, tap tempo, USB port, line in, headphone out, built-in chromatic tuner

B-Stock, Peavey 3120 Guitar Head, 4x EL34 and 4x 12AX7 Tubes, 120 Watt @ 16, 8 or 4 Ohm (switchable), 3 switchable channels, controls for Clean-channel: Volume, Bass, Mid and Treble, Crunch channel: Gain, Volume, Bass, Mid and Treble (active), on Lead channel Gain, Volume, Bass, Mid and Treble (active), switch for Tight, Medium or Loose, Dimension (HxWxD): 11 (279 mm) x 26,5 (673 mm) x 11 (279 mm), weight 52 lbs (23,6 kg), 3-button footswitch incl., B-Stock with full warranty, may have slight traces...

Built-in DSP effects processor. 1 x 6.3mm (1/4") jack socket output for separate Effects Send (can also be used as socket for optional footswitch for on/off of the internal effects). 6 RQ™ (reference-quality) low noise microphone inputs with insert points exceptionally low 0.0007% THD. Channels 7/8 and 9/10 w/ dual switchable stereo line inputs. 3-band EQ on all channels. LED clip, signal, mute indication. 1 pre-fader monitor send. 1 post-fader effects send. Precision 60 mm faders on input...

Peavey 1 button push on/ push off footswitch. Foot-switch to operate electronic audio equipment e.g Start / Stop or Effect On / Off and similar. Genuine authorised Peavey spare part number 03564730...

100 watts (rms) into 16, 8, or 4 ohms (switchable). Four 6L6GC and three 12AX7 tubes. Two independent footswitchable channels. Separate EQ for each channel. Footswitchable gain/volume boost on lead channel. Dual paralleled speaker jacks. Two 12 inch ValveKing® speakers. Reverb with level control. Buffered effects loop. Resonance and presence controls. Patented Texture™ variable Class A simulation control. Footswitch not included. Weight Unpacked: 64.50 lb(29.257 kg). Weight Packed: ...