Peavey FS 2 Valve King : 35 results priced between £50.00 and £600.00

Peavey FS 2 Valve King - original footswitch for Peavey Valve King series and 6505 - 112 combo, with LED

Birch ply construction. 16 Ohms. Four 12" (305mm) Valve King speakers. Rear-mounted speakers. 400 Watts continuous power handling. Two paralleled 1/4" phone jacks (daisy-chained paralleled outputs). Dimensions: (HxWxD): 31.875" (810 mm) x 29.75" (756 mm) x 14.25" (362 mm). Weight: 77 lbs (35 Kg). Packed Weight: 45.00 kg. Packed Cube: 0.33 m³. Commodity code: 8518408990. Country of Origin: China. Related Accessories: 18 Gauge (0.8 mm²) Cables, 1/4" 2-pole Male Plugs - 3' (0.9m) S/S (...

B-Stock, Peavey Valve King 112, guitar combo, 50watts/16ohm, 1x 12" valve king speaker, 2x 6L6GC and 3x 12AX7 tubes, two independent foot switchable channels, separate EQ for each channel, foot switchable gain/volume boost on lead channel, external speaker output, reverb with level control, effects loop, resonance switch for tighter/loose cabinet response, patent pending texture variable class A/B simulation control. Optional foot switch: 189024. Dimensions: 18,25" (464mm) x 21,38" (543mm) x 10,...

The Peavey Valveking/Windsor switch is designed for the Peavey Valveking and Peavey Windsor amps and combos.

The Peavey ValveKing® Series is a new, all-tube guitar amp line combining boutique features and hot-rodded tones with legendary Peavey reliability.Birch construction 16 ohms mono with dual input jacks for connecting additional cabinets Four 12 inch ValveKing® speakers Rear-mounted speakers 400 watts continuous power handling Straight and slant versions available Weight Unpacked: 77.00 lb(34.927 kg) Weight Packed: 86.00 lb(39.009 kg) Width Packed: 17'(43.18 cm) Height Packed: 35.25&...

Birch construction. 16 ohms mono with dual input jacks for connecting additional cabinets. Four 12 inch ValveKing® speakers. Rear-mounted speakers. 400 watts continuous power handling. Straight and slant versions available. Weight: 39 kg.

Quick Overview Peavey ValveKing® amps feature a patented, variable Class A-A/B control called Texture™, which allows sweepable selection between Class A and Class A/B power structures, as well as any combination of the two. With this feature, guitarists can coax virtually any tone from this tweaked-out amplifier. The amp's preamp and power sections use 12AX7 and 6L6GC tubes, respectively, and drive specially voiced 12" ValveKing® loudspeakers (112 and 212 versions only). Additional standard features...

Get the most out of your Peavey ValveKing or Windsor amp with this 2 button footswitch. Allows you to select amp channel and engage boost. LEDs indicate status.

Birch construction. 16 ohms mono with dual input jacks for connecting additional cabinets. Four 12 inch ValveKing® speakers. Rear-mounted speakers. 400 watts continuous power handling. Straight and slant versions available. Weight Unpacked: 77.00 lb(34.927 kg). Weight Packed: 86.00 lb(39.009 kg). Width Packed: 17"(43.18 cm). Height Packed: 35.25"(89.535 cm). Depth Packed: 33"(83.82 cm).

2 button footswitch for Peavey ValveKing guitar amp. The two button foot-switch has one button for channel selection and one button for boost on/off and each button has an LED indicator light built into the footswitch.

Birch construction. 16 ohms mono with dual input. jacks for connecting additional cabinets. Four 12 inch ValveKing speakers. Rear-mounted speakers. 400 watts continuous power handling. Straight and slant versions available. Weight Unpacked: 80.00 lb(36.288 kg). Weight Packed: 89.00 lb(40.37 kg). Width Packed: 17"(43.18 cm). Depth Packed: 35.25"(89.535 cm). Height Packed: 33"(83.82 cm).

100 Watts into 4, 8 or 16 Ohms. Four 6L6GC and three 12AX7 tubes. Two independent footswitchable channels. Separate EQ for each channel. Footswitchable gain/volume boost on lead channel. Dual speaker jacks in parallel. Two 12" (305mm) Valve King speakers. Reverb with level control. Buffered effects loop. Rresonance and Presence controls. New, patent-pending Texture variable Class A/B simulation control. Dimensions: (HxWxD): 20.63" (524 mm) x 26.5" (673 mm) x 11.13" (283 mm). Weight: ...

The Peavey VALVE KING 212 Guitar Valve Amplifier Combo, 100 Watts, 2 X 12 inch Speakers. Sweepable selection between Class A and Class B power structures enables guitarists to coax virtually any tone. The Peavey VALVE KING 212 is part of the Valve King series designed to offer more all-tube “Bang For Your Buck” than any other amps on the market. Two channels offer optimum flexibility in a small package. The Clean channel includes a Bright switch and separate three-band passive EQ, allowing the Lead...

Birch ply construction. 16 Ohms. Four 12" (305mm) Valve King speakers. Rear-mounted speakers. 400 Watts continuous power handling. Two paralleled 1/4" phone jacks (daisy-chained paralleled outputs). Dimensions: (HxWxD): 31.875" (810 mm) x 29.75" (756 mm) x 14.25" (362 mm). Weight: 77 lbs (35 Kg). Packed Weight: 45.00 kg. Packed Cube: 0.33 m³. Commodity code: 8518408990. Country of Origin: China. Related Accessories: 18 Gauge (0.8 mm²) Cables, 1/4" 2-pole Male Plugs - 3' (0.9m) S/S (...

Peavey Valve King 412 Straight Guitar Cabinet - 4x 12" Valveking speakers, 400W/16ohm (mono). Dimensions: 746 x 762 x 362mm. Weight: 29kg Guitars, Basses, Amps / Electric Guitar Speakers

The Peavey Valveking 112 is a fantastic guitar combo, and it has just been awarded 5 stars and the Guitarist Gold award in April's edition of Guitarist magazine. They thought that the Peavey Valve King VK112 was fantastic and so will you. Look what the Peavey Valve King features are 50 Watts into 16 Ohms , that's 50watts of pure valve tone Two 6L6GC and three 12AX7 tubes Two independent footswitchable channels (ideal for on stage) Separate EQ for each channel Footswitchable gain/volume boost on lead...

100 watts (rms) into 16, 8, or 4 ohms (switchable). Four 6L6GC and three 12AX7 tubes. Two independent footswitchable channels. Separate EQ for each channel. Footswitchable gain/volume boost on lead channel. Dual paralleled speaker jacks. Two 12 inch ValveKing® speakers. Reverb with level control. Buffered effects loop. Resonance and presence controls. Patented Texture™ variable Class A simulation control. Footswitch not included. Weight Unpacked: 64.50 lb(29.257 kg). Weight Packed: ...

The Peavey ValveKing® Series is a new, all-tube guitar amp line combining boutique features and hot-rodded tones with legendary Peavey reliability.

Birch construction. 16 ohms mono with dual input jacks for connecting additional cabinets. Four 12 inch ValveKing® speakers. Rear-mounted speakers. 400 watts continuous power handling. Straight and slant versions available. Weight Unpacked: 77.00 lb(34.927 kg). Weight Packed: 86.00 lb(39.009 kg). Width Packed: 17"(43.18 cm). Depth Packed: 35.25"(89.535 cm). Height Packed: 33"(83.82 cm).

50w into 16 ohms. Two 6L6GC and three 12AX7 tubes. DC-powered preamp tube heaters. Two independent footswitchable channels. Separate EQ for each channel. Footswitchable gain/volume boost on lead channel. External speaker capability. One 12" ValveKing speaker. Reverb with level control. Buffered effects Loop. Resonance switch for tight or loose cabinet response. Patent-pending Texture variable Class A/B simulation control.

The Ultimate in Protection for your Gear The Flightcase Warehouse 1x12 cab case is a custom built flight case designed to protect your cab/combo whilst on the road. This flight case is designed in house by our design team and manufactured using Penn Hardware with ultra strong hexaboard panels. Our sales team is always on hand to discuss your requirements if this flight case spec does not suit your needs. Technical Details: Type: Lift of lid Material: 9mm hexa board Int Dims: Custom built to suit...

Note: The image used in this product description is a library image and not a picture of the specific cover or specific amplifier. However your cover will be made to measure for your Peavey Valveking 212 Combo Cover

The ValveKing(R) Royal 8 is a true class A guitar amplifier designed to give players the punchy dynamics and tones that inspired rock 'n' roll's greatest riffs. Perfect for rehearsing, the Royal 8 features a simple interface of a single tone control, dual inputs and master volume and gain controls that can be adjusted for either class A breakup power-amp tones-achieved by reducing the gain and increasing the master volume-or preamp distortion, which players can access by reducing the master volume...

100 watts into 4, 8 or 16 ohms. 4 x 6L6GC valves (tubes) and 3 x 12AX7 valves (tubes). 2 x independent footswitchable channels. Separate EQ for each channel. Footswitchable gain/volume boost on lead channel. Dual speaker jacks in parallel. Reverb with level control. Buffered effects loop. Resonance and presence controls. Texture variable Class A/B simulation control. Dimensions (HxWxD): 9.75" (248mm) x 26.5" (673mm) x 11.13" (283mm). Weight: 41 lbs (18.64 Kg). Shipping weight: 22kg.

50w into 16 ohms. Two 6L6GC and three 12AX7 tubes. DC-powered preamp tube heaters. Two independent footswitchable channels. Separate EQ for each channel. Footswitchable gain/volume boost on lead channel. External speaker capability. One 12" ValveKing speaker. Reverb with level control. Buffered effects Loop. Resonance switch for tight or loose cabinet response. Patent-pending Texture variable Class A/B simulation control.

B-Stock, Peavey Valve King guitar head 100, 100watts/16ohms, four 6L6GC and three 12AX7 tubes, two independent channels (foot-switchable), separate EQ for each channel, gain/volume boost on lead channel (foot-switchable), external speaker output, reverb with level control, effects loop and resonance switch for tight or loose cabinet response. New patent pending texture variable class A/B simulation control. Optional footswitch (189024), dimensions (H x W x D): 9,75" (248mm) x 26,5" (673mm) x 11,...

100 Watts into 4, 8 or 16 Ohms. Four 6L6GC and three 12AX7 tubes. Two independent footswitchable channels. Separate EQ for each channel. Footswitchable gain/volume boost on lead channel. Dual speaker jacks in parallel. Reverb with level control. Buffered effects loop. Resonance and Presence controls. New, patent-pending Texture variable Class A/B simulation control. Dimensions: (HxWxD): 9.75" (248mm) x 26.5" (673mm) x 11.13" (283mm). Weight: 41 lbs (18.64 Kg). Packed Weight: 22.00 kg...

Thon case for guitar head Peavey Valve King 100 - manufactured from 7mm birch plywood, 30 x 30mm aluminium rails, 2x butterfly locks, 2 handles, min. 10 mm foam padding, steel corners, made in germany, outside dimensiones (wxdxh) 744 x 309 x 348 mm, wight ca. 8,8 kg (without amp)

Use the slider below to set your deposit amount (10% to 50%)

60 Watts RMS. Footswitchable Rhythm/Lead channel select. Effects Loop. Seperate 3 band EQ for each channel. Seperate Resonance and Presence controls per channel. Two 6L6GC power tubes, 5 x 12AX7 preamp tubes. Genuine 3 spring reverb. 12" Sheffield Loudspeaker. Integrated MSDI Microphone simulation direct interface. Weight: 27.8 Kg.

200W All tube combo. 15" Bass driver + HF horn. 4 x 6550 tube output stage. 2 x ECC82, 1 x ECC99 and 2 x ECC82 valves in the preamp stage. High and low gain inputs. Front panel-mounted FX send and return. Bass, middle and treble controls. Mid shift, bass shift and bright switching. Mute switch. Balanced DI output with pre/post EQ switching.