Precision UV (6) : 1819 results priced between £2.00 and £600.00

Absorbs the ultraviolet rays which often makes outdoor photographs hazy and indistinct. A muliti-purpose fine-weather filter for color as well as black and white films. Also serves as a permanent lens protector. These outstanding filters offer revolutionary performance in light transmission and color balance. 12 layers of Super Multicoating are applied to the surfaces of the Skylight 1B and UV(0) models, which produces an average transmission of 99.7%! Coupled with maximum surface precision, this...

Precision UV is a contact lens built with special UV resistance technology. It blocks around 90% of the harmful UV rays that all people are exposed to on a daily basis. It's therefore a recommended contact lens for people who work outdoors or enjoy outdoor sports. Precision UV is also a high water contact lens (74% water content) and so transmits a lot of oxygen to the eye. This maintains a refreshed feeling in the eye even with long hours of wear time. Precision UV contact lenses are replaced...

Part Description The MWCL-A-6 is part of the Double Wide Clamp Collars range from Reliance Precision Mechatronics. The key attributes of the MWCL-A-6 are: Bore (B) : 6mm Outer Diameter (D) : 16mm Width (W) : 20mm Screw Head Clearance (C) : 20.8mm See below for the full specification.If you require a modified or custom version of this product please contact us for further information.

Highest cutting speed and precision thanks to double-row Japan toothing. For wood up to 50 mm, plasterboard and soft plastics. Length 50 mm, form 127

Part Description The RCSA30G-10-6 is part of the RELI-A-GRIP COUPLING range from Reliance Precision Mechatronics. The key attributes of the RCSA30G-10-6 are: Bore 1 (B1) : 10mm Bore 2 (B2) : 6mm Outer Diameter (D) : 30mm Overall Length (L) : 30.3mm See below for the full specification.If you require a modified or custom version of this product please contact us for further information.

Face Diameter is 23cm Clear and Large Numbers White Dial 1 x AA battery required Radio Controlled, Manufacturer: Precision

This precision file is suitable for use on ferrous and non-ferrous metals but can also be used for other hard or soft materials.

Twelve layers of Super Multi-Coating are applied to the surfaces of the Skylight 1B and UV filters, which results in an average light transmission of 99.7%! Coupled with maximum surface precision, this allows increased resistance to flare, even at wide apertures. The Ultra-thin Circular Polarizing filters have seven layers of Multi-Coating applied to the rear surface to eliminate internal reflections and ghosting. Advanced thin selective film is used to guarantee perfectly polarized light with neutral...

Part Description The K-M4-6 is part of the COUNTERSUNK HEAD SCREW range from Reliance Precision Mechatronics. The key attributes of the K-M4-6 are: Thread Size : M4 Length (L) : 6mm Thread Specification : BS 3643 Pt2 Tolerance Class : 6g See below for the full specification.If you require a modified or custom version of this product please contact us for further information.

Leica creates precision optical products for work and leisure. The superlative photographic results brought about by the precision optics and mechanics, the brilliant image in the slide projection, or in nature as observed through binoculars or spotting scopes, all bring enjoyment to their users. A sense of achievement arises when intense involvement with the products leads users to discover and perfect new capabilities and new ways of seeing, whether in photography or - using the binoculars and...

Part Description The SS-M3-6 is part of the SET SCREW, CUP POINT range from Reliance Precision Mechatronics. The key attributes of the SS-M3-6 are: Standard Thread Size : M3 Socket Head A/F (J) : 1.5mm Length (L) : 6mm Material : Stainless steel See below for the full specification.If you require a modified or custom version of this product please contact us for further information.

Highest cutting speed and precision thanks to double-row Japan toothing. For wood up to 50 mm, plasterboard and soft plastics. Length 50 mm, form 127

Part Description The D010-6 is part of the Dowel Pin range from Reliance Precision Mechatronics. The key attributes of the D010-6 are: Diameter (D) : 1.0+/-0.0025mm Length (L) : 6+/-0.25mm Material : Stainless steel 300 series Diameter Code : 010 See below for the full specification.If you require a modified or custom version of this product please contact us for further information.

Part Description The MSP-1-6-MCP is part of the Spirol Pin 1 X 6 Long range from Reliance Precision Mechatronics. The key attributes of the MSP-1-6-MCP are: Actual Diameter (D) : 1.05/1.15mm Recommended Hole Diameter : 1.00/1.04mm Length (L) : 6mm Chamfer Diameter (B) : 0.95mm See below for the full specification.If you require a modified or custom version of this product please contact us for further information.

Part Description The P-M3-6 is part of the Pan Head Screw range from Reliance Precision Mechatronics. The key attributes of the P-M3-6 are: Standard Thread Size : M3 Length (L) : 6mm Head Diameter (D) : 6.0mm Head Length (H) : 1.8mm See below for the full specification.If you require a modified or custom version of this product please contact us for further information.

Part Description The MTCL-SS-6 is part of the One-piece Threaded Collar range from Reliance Precision Mechatronics. The key attributes of the MTCL-SS-6 are: Bore (B) : M6x1 Outer Diameter (D) : 16mm Width (W) : 9mm Screw Head Clearance (C) : 20.8mm See below for the full specification.If you require a modified or custom version of this product please contact us for further information.

Part Description The BBM1-6 is part of the Bronze Bearings range from Reliance Precision Mechatronics. The key attributes of the BBM1-6 are: Bore (B) : 6mm Outside Diameter (D) : 10mm Length (L) : 12mm Material : Bronze ASTM B438 See below for the full specification.If you require a modified or custom version of this product please contact us for further information.

Part Description The BBM2-6 is part of the Bronze Bearings (flanged) range from Reliance Precision Mechatronics. The key attributes of the BBM2-6 are: Bore (B) : 6mm Outside Diameter (D) : 10mm Length (L) : 12mm Flange Diameter (A) : 14mm See below for the full specification.If you require a modified or custom version of this product please contact us for further information.

Part Description The BM9-6 is part of the Moulded Bearings range from Reliance Precision Mechatronics. The key attributes of the BM9-6 are: Bore (B) : 6.044mm Outside Diameter (D) : 8mm Length (L) : 5.91mm Flange Diameter (A) : 11.82mm See below for the full specification.If you require a modified or custom version of this product please contact us for further information.

Part Description The C-M2-6 is part of the Cheese Head Screw range from Reliance Precision Mechatronics. The key attributes of the C-M2-6 are: Standard Thread Size : M2 Length (L) : 6mm Head Diameter (D) : 3.8mm Head Length (H) : 1.3mm See below for the full specification.If you require a modified or custom version of this product please contact us for further information.

Part Description The C-M3-6 is part of the Cheese Head Screw range from Reliance Precision Mechatronics. The key attributes of the C-M3-6 are: Standard Thread Size : M3 Length (L) : 6mm Head Diameter (D) : 5.5mm Head Length (H) : 2.0mm See below for the full specification.If you require a modified or custom version of this product please contact us for further information.

Part Description The C-M4-6 is part of the Cheese Head Screw range from Reliance Precision Mechatronics. The key attributes of the C-M4-6 are: Standard Thread Size : M4 Length (L) : 6mm Head Diameter (D) : 7.0mm Head Length (H) : 2.6mm See below for the full specification.If you require a modified or custom version of this product please contact us for further information.

Part Description The CGM1-6 is part of the Gear Clamp range from Reliance Precision Mechatronics. The key attributes of the CGM1-6 are: Bore (B) : 7.6mm Outer Diameter (A) : 22mm Width (W) : 5mm For Gear Bore : 6mm See below for the full specification.If you require a modified or custom version of this product please contact us for further information.

Part Description The CSM-6 is part of the Shaft Retaining Collar range from Reliance Precision Mechatronics. The key attributes of the CSM-6 are: Bore (B) : 6mm Outer Diameter (A) : 10mm Shoulder Diameter (C) : 7.9mm Length (L) : 6mm See below for the full specification.If you require a modified or custom version of this product please contact us for further information.

Part Description The D015-6 is part of the Dowel Pin range from Reliance Precision Mechatronics. The key attributes of the D015-6 are: Diameter (D) : 1.5+/-0.0025mm Length (L) : 6+/-0.25mm Material : Stainless steel 300 series Diameter Code : 015 See below for the full specification.If you require a modified or custom version of this product please contact us for further information.

Part Description The D025-6 is part of the Dowel Pin range from Reliance Precision Mechatronics. The key attributes of the D025-6 are: Diameter (D) : 2.5+/-0.0025mm Length (L) : 6+/-0.25mm Material : Stainless steel 300 series Diameter Code : 025 See below for the full specification.If you require a modified or custom version of this product please contact us for further information.

Part Description The D030-6 is part of the Dowel Pin range from Reliance Precision Mechatronics. The key attributes of the D030-6 are: Diameter (D) : 3.0+/-0.0025mm Length (L) : 6+/-0.25mm Material : Stainless steel 300 series Diameter Code : 030 See below for the full specification.If you require a modified or custom version of this product please contact us for further information.

Part Description The K-M3-6 is part of the Countersunk Head Screw range from Reliance Precision Mechatronics. The key attributes of the K-M3-6 are: Thread Size : M3 Length (L) : 6mm Thread Specification : BS 3643 Pt2 Tolerance Class : 6g See below for the full specification.If you require a modified or custom version of this product please contact us for further information.

Part Description The M0CT-AT-25-10-6 is part of the Oldham Large Offset Couplings range from Reliance Precision Mechatronics. The key attributes of the M0CT-AT-25-10-6 are: Bore 1 (B1) : 10mm Bore 2 (B2) : 6mm Outer Diameter (D) : 25.4mm Overall Length (L) : 31.8mm See below for the full specification.If you require a modified or custom version of this product please contact us for further information.

Part Description The M0CT-AT-25-6-6 is part of the Oldham Large Offset Couplings range from Reliance Precision Mechatronics. The key attributes of the M0CT-AT-25-6-6 are: Bore 1 (B1) : 6mm Bore 2 (B2) : 6mm Outer Diameter (D) : 25.4mm Overall Length (L) : 31.8mm See below for the full specification.If you require a modified or custom version of this product please contact us for further information.

Part Description The M0CT-AT-25-8-6 is part of the Oldham Large Offset Couplings range from Reliance Precision Mechatronics. The key attributes of the M0CT-AT-25-8-6 are: Bore 1 (B1) : 8mm Bore 2 (B2) : 6mm Outer Diameter (D) : 25.4mm Overall Length (L) : 31.8mm See below for the full specification.If you require a modified or custom version of this product please contact us for further information.

Part Description The M0CT-NL-25-12-6 is part of the Oldham Large Offset Couplings range from Reliance Precision Mechatronics. The key attributes of the M0CT-NL-25-12-6 are: Bore 1 (B1) : 12mm Bore 2 (B2) : 6mm Outer Diameter (D) : 25.4mm Overall Length (L) : 31.8mm See below for the full specification.If you require a modified or custom version of this product please contact us for further information.

Part Description The M0CT-NL-25-6-6 is part of the Oldham Large Offset Couplings range from Reliance Precision Mechatronics. The key attributes of the M0CT-NL-25-6-6 are: Bore 1 (B1) : 6mm Bore 2 (B2) : 6mm Outer Diameter (D) : 25.4mm Overall Length (L) : 31.8mm See below for the full specification.If you require a modified or custom version of this product please contact us for further information.

Part Description The M0ST-AT-13-6-3 is part of the Oldham Large Offset Couplings range from Reliance Precision Mechatronics. The key attributes of the M0ST-AT-13-6-3 are: Bore 1 (B1) : 6mm Bore 2 (B2) : 3mm Outer Diameter (D) : 12.7mm Overall Length (L) : 15.9mm See below for the full specification.If you require a modified or custom version of this product please contact us for further information.

Part Description The M0ST-AT-13-6-6 is part of the Oldham Large Offset Couplings range from Reliance Precision Mechatronics. The key attributes of the M0ST-AT-13-6-6 are: Bore 1 (B1) : 6mm Bore 2 (B2) : 6mm Outer Diameter (D) : 12.7mm Overall Length (L) : 15.9mm See below for the full specification.If you require a modified or custom version of this product please contact us for further information.