Project Ampbox, Mono Power Amplifier In Silver : 56 results priced between £150.00 and £15,000.00

UK mainland : Free. Scottish Highlands : Free. Scottish Islands : £10.00. Northern Ireland : £10.00. Channel Islands : £10.00. Isle of Man/ Isle of White : £10.00.

UK mainland : Free. Scottish Highlands : Free. Scottish Islands : £10.00. Northern Ireland : £10.00. Channel Islands : £10.00. Isle of Man/ Isle of White : £10.00.

High end, 2 channel hi-fi experts. UKs finest projection home cinema room. Multi-room specialists. Installation service. Hugely Knowledgeable staff. Quality brands. Best prices (Price Promise). 30 day money back guarantee. Not just a website, visit the UKs best hi-fi showroom. FREE parking.

RMS Power @ 4 Ohms: 1 x 300W - Frequency Response 10 Hz-300 Hz (±3dB) - Glass Epoxy PCB - Remote Bass Boost - Dimensions:10.24''W x 2.21''H x 16.14''L RMS Power @ 2 Ohms: 1 x 500W - Output Power @ 14.4v DC, 50Hz - Silver RCA Inputs - Input Impedance: 10K Ohms RMS Power @ 1.3 Ohms: 1 x 700W - 1 Ohm Stable - Custom Terminal Block for Speaker Connection - Soft Turn On/ Off Maximum Power Output 2400W Mono - MOSFET Power Supply - Thermal / Overload / Short Circuit Protection - Advanced Protection Circuitry...

Bi-Phase PWM(Pulse Wave Modulation) circuit. Discrete design for ultra-dynamic playback and highest resolution. SMD for short signal paths. 1x40W@4ohms/1x28W@8ohms. Ultra high-efficiency: approximately 80% of power consumption goes to power out. Gold-plated, over-sized binding posts. Trigger-switching with Loop-out. RCA-Loop-out, for Bi-Amping, etc. Available in black and silver.

The Myryad MXI2150 is a powerful, mighty, amplifier that offers an effortless and neutral performance - available in black or silver. Weighing in at 22kg, with a 9mm bead blasted anodised aluminium front panel, build quality is impressive. Even more so are the specs on paper, with continuous power rated at 150W (into 8 ohms), enough to drive most speakers with ease. This model features a "Smart My-Link" connection, allowing you to control and link it to other Myryad equipment.

A new addition to the Audiolab range, the 8200MB is an advanced single-channel power amplifier capable of partnering loudspeakers of the highest calibre. With a rating of 250W, it is designed to deliver high power with ultra-low distortion.

* Continuous rated power output, stereo 8O: 80W 4O:120W. * THD: @ 80% rated power, 8O, 20Hz - 20kHz: 0.02%. * Signal/Noise ratio: (A-weighted, ref 80W): >116dB. * Input sensitivity: (ref 80W): 900mV. * Input impedance: 60kO/440pF. * Frequency response (20Hz -20kHz): ±0.2dB (-2dB @ 96kHz). * Dimensions (w x h x d): 436 x 95 x 355mm. * Weight (net): 10.2 kg. * Fascia: 9mm anodised bead blasted aluminium in anodised.

Enjoy even better performance from your integrated amplifier by adding this stereo power amplifier and bi-amping - available in silver. Adding a power amplifier to your existing integrated amplifier (providing it has a "Pre Out") should offer enhanced dynamics, even greater transparency and heightened bass. A serious system upgrade.

The Myryad MX Modular Power Amplifier has been designed to provide a flexible solution to a wide range of power amplifier requirements. As a two-channel unit it can be partnered with the Myryad MXP2000 stereo preamplifier (or other high quality preamp) to deliver audiophile quality stereo. In multi-channel form it can be used to provide power for high quality Home Cinema or music surround systems when partnered by a suitable surround preamplifier-processor such as Myryad's MXD4000. It can also be...

1 x 1100 watts max output - dual mosfet pwm power supplies - power & protection l.e.d's - dimensions: 11.1''w x 2.2''h x 13.9''l Fully adjustable electronic crossover - variable gain control - s/n ratio: >95db - fuse: 15a x 2 Variable bass boost: (0-12db @60hz) - remote turn on - frequency response: 40-150 hz - remote bass boost controller Soft turn on/off circuit - heavy duty aluminum alloy heat sink - thd: <0.04% 2 ohm stable - hi/lo level molex input - fully protected circuitry

Bi-Phase PWM (Pulse Wave Modulation) circuit. Discrete design for ultra-dynamic playback and highest resolution. SMD for short signal paths. 1x190W@4ohms/110W@8ohms. Frequency response: 10Hz-50kHz. Ultra high-efficiency: approx. 92% of power consumption goes to power out. Gold-plated, over-sized binding posts. Trigger-switching with Loop-out. RCA Loop-out, for Bi-Amping, etc. Available in black and silver.

1 x 1800 watts max output - soft turn on/off circuit - heavy duty aluminum alloy heat sink - fully protected circuitry 1 x 900 watts rms output @ 1 ohms - 1 ohm stable - line out for system building - dimensions: 11.1''w x 2.2''h x 10''l Fully adjustable electronic crossover - phase switch - power & protection l.e.d's - fuse: 30a x 2 Variable bass boost: (0-12db @60hz) - variable gain control - s/n ratio: >100db - remote bass boost controller Variable subsonic filter - remote turn on - thd: <0.04%

The PMA-520AE amplifier features consists of state of the art High-Current Single-Push-Pull circuitry to achieve both strength and detail in music playbackThe relay switch used for CD and Phono input contains an inert gas to prevent the occurrence of noise that can negatively affect the signal. In addition, durable parts strictly selected for their contribution to sound quality, such as the large-capacity block capacitor for the power supply circuit, high-quality sound carbon resistors, and...

1 x 2700 watts max output - dual mosfet pwm power supplies - power & protection l.e.d's - dimensions: 11.1''w x 2.2''h x 13.9''l Fully adjustable electronic crossover - variable gain control - s/n ratio: >95db - fuse: 25a x 2 Variable bass boost: (0-12db @60hz) - remote turn on - frequency response: 40-150 hz - remote bass boost controller Soft turn on/off circuit - heavy duty aluminum alloy heat sink - thd: <0.04% 2 ohm stable - hi/lo level molex input - fully protected circuitry

1 x 3000 watts max output - soft turn on/off circuit - heavy duty aluminum alloy heat sink - fully protected circuitry 1 x 1500 watts rms output @ 4 ohms - 1 ohm stable - line out for system building - dimensions: 11.1''w x 2.2''h x 12.2''l Fully adjustable electronic crossover - phase switch - power & protection l.e.d's - fuse: 30a x 3 Variable bass boost: (0-12db @60hz) - variable gain control - s/n ratio: >100db - remote bass boost controller Variable subsonic filter - remote turn on - thd: ...

Thermally optimized die-cast heatsink;. Silver colour shrouds, hide connections and control panel, providing a hi-tech look;. HE Status logo monitors the status of the amplifier;. HE Input featuring either Speaker In (OEM radio) or RCA (Aftermarket radio) inputs;. ART™, Automatic Remote Turn-On/Off function automatically turns on and off the amplifier when the OEM radio turns on and off (available on Speaker In only);. Full range Pre-out, also available when using Speaker Level In inputs;. ...

Symmetrical Construction. Clean Ground Construction. Power Amp Direct Mode. 5 tacticle keys including Power Amp Direct. A trans-stabiliser. 12 blue LED indicators. Motorised aluminium Volume Knob.

Description Specification Reviews With 20W per channel available into 8 ohms, the Project Amp Box Stereo is a compact amplifier solution which will find many applications, for example amplifying the audio output of your PC or laptop. 80% efficiency means little waste energy as head, thanks to the class D circuitry of the Project Amp Box Stereo. Short signal paths ensure the most dynamic and detail sound quality. Gold plated input and output sockets guarantee excellent reliable connections, whilst...

The Pro-ject Headbox S is a robustly-built, high quality alternative to the often inferior headphone outputs on many hifi systems. - Product Dimensions (mm) : 105 x 38 x 120 mm - Product Weight (KG) : .6 (excluding supplied external power supply)

50W+50W(20Hz-20kHz,0.1%THD,4oh ms). 30W+30W(20Hz-20kHz,THD0.05%,8o hms). THD: 0.01 % (Rated Output -3 dB, 8 ohms, 1 kHz). Guaranteed Speaker Impedance (2 Speaker Terminals): 4-16 ohms (A or B), 8-32 ohms (A+B), 4-16 ohms (Bi-Wiring). Frequency Response: 5 Hz-100 kHz, 0 dB/-3 dB, 20 Hz-20 kHz, ±0.5 dB (RIAA Eqalisation) MM. Power Requirements: AC 220-230 V 50 Hz. Power Consumption: 135 W. Power Consumption During Standby: 0.3 W. Dimensions(WxHxD):435x128x360m m. Weight: 6.7 kg. Available in...

The PMA-2020AE is an integrated amplifier that faithfully reproduces a wide range of music sources, from analogue record players to the most advanced sound sources from a PC. A variety of advanced circuits in this amp ensure a consistently stable supply of power even for musical passages with sudden bursts of sound or continuous fortissimos. The circuit configuration includes a further-improved Advanced UHC-MOS Single Push-Pull Circuit, and the strengthened power circuit masterfully...

Power output: 700mW/30ohms, 110mW/300ohms. Headphone connection: >30 ohms. Signal to noise: 110dB (115dB - A weighted) at full output. Frequency response: 20Hz – 20kHz/-0.03dB. THD (IMD): 0.003%/30ohms, 0.007/300ohms. Gain: 12dB. Input Impedance: 47 kOhms. Headphone jacks: 2x 3-pole ¼" (6.3mm) headphone jack sockets. Line-level output: 1 pair RCA/phono sockets. Outboard power supply: 16V/1.000mA AC. Power consumption: 16V/230mA AC. Dimensions: W x H x D 103 x 72 x 151mm. Weight: 1080g...

Studio Linear Amplifier. Extremely Low Noise, Discrete Linear Design. 100 Watts/Channel @ 8 Ohms. 260 Watts/Bridged Mono @ 8 Ohms. Toroidal Transformer. 10 Hz to 40 kHz within 1dB. XLR & 1/4” Inputs. Ground Lift Switch. Silent, Thermal Dependent Cooling System. Multi-Way Binding Post Outputs. Low Profile 1U Rackmount Design. All Steel and Aluminum Chassis. Perfect for Pro and Project Studio.

The ART SLA-4 studio linear power amplifier delivers the clean power you need for any professional audio application including project or professional studio environments or commercial sound installations. The ART SLA-4 true four-channel amplifier can be switched easily from Multi-channel, Stereo and Bridged Mono Modes. Additional mode switches allow you to bridge channels 1 and 2, or channels 3 and 4, or both channel pairs, maximizing flexibility by allowing the amp to be configured for best utilization...

Power output: Stereo Mode 65 W into 8 Ω, 130 W into 4 Ω, Mono Mode 100 W into 8 Ω, 200 W into 4 Ω. THD(+ noise): Stereo <0.03%, Mono <0.02%. Signal to Noise Ratio: Stereo >94 dB, Mono >100 dB. Frequency Response: <0.5 dB, (20 Hz to 20 kHz)>. 1 x RCA Phono Line level. 1 x Trigger input 3.5 mm mono jack ±4.5 to ±15V DC. Dimensions - 220 x 100 x 315 mm (W x H x D). Weight - 3.9 kg (unpacked), 4.6 kg (packed).

Signal to Noise: CEA 2006 S/N Ratio (IHF A Weighted, Reference: 1W into 4Ω) 92 dBA

With a 20 year warranty and 300w/ch across 2 channels which can be bridged to provide 900w in mono mode this power amplifier will drive even the most difficult loudspeaker loads.

The Sansui SAP-201V Stereo Amplifier is a solidly built stereo amplifier and offers a built-in DAC, a feature usually exclusive to much more expensive models. A rigid and solid feel is provided by its all-metal case, and the audiophile grade components used throughout (along with a high-spec toroidal power supply) ensure accurate sound tuning. 'Direct Access' circuitry ensures very short signal paths for a truly great sound at an amazing value.

UK mainland : Free. Scottish Highlands : Free. Scottish Islands : £10.00. Northern Ireland : £10.00. Channel Islands : £10.00. Isle of Man/ Isle of White : £10.00.

UK mainland : Free. Scottish Highlands : Free. Scottish Islands : £10.00. Northern Ireland : £10.00. Channel Islands : £10.00. Isle of Man/ Isle of White : £10.00.

UK mainland : Free. Scottish Highlands : Free. Scottish Islands : £10.00. Northern Ireland : £10.00. Channel Islands : £10.00. Isle of Man/ Isle of White : £10.00.

UK mainland : Free. Scottish Highlands : Free. Scottish Islands : £10.00. Northern Ireland : £10.00. Channel Islands : £10.00. Isle of Man/ Isle of White : £10.00.