Pyle Academy PLAM2300 Car Amplifier - 75 W RMS - 2.30 kW PMPO - 2 Channel - Bridgeable - 16 Ohm - 90 dB SNR - 15 Hz to 30 kHz - MOSFET Power Supply - 2 Ohm Stable, Thermal Protection : 19 results priced between £75.00 and £500.00

4-channel car amplifier. 75 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms). 200 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode). variable high- and low-pass filters (50-150 Hz, 12 dB/octave). Class-AB amplifier design. frequency response: 10-60,000 Hz. preamp- and speaker-level inputs. 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier. fuse rating: 25A x 2. 11-13/16"W x 2"H x 7-7/8"D. warranty: 1 year.

Number of channels 4. Amplifier class AB. Mono bridge mode 4 ohm 2 x 150 W RMS (2 x 175W @14,4V, 1% THD). Output power in 2 ohm 4 x 75 W RMS (4 x 100W @14,4V, 1% THD). Output power in 4 ohm 4 x 55 W RMS (4 x 70W @14,4V, 1% THD). Damping factor > 100. S/N ratio, A-weighted > 100 dB. Frequency range 10 Hz - 35 kHz. Input sensitivity 0,25 - 8 V. Input impedance > 47 kohm. Input impedance, high level 220 ohm. Filters channel A & B HP: 50 - 500 Hz, LP: 50 - 500 Hz. Filters channel C & D HP...

mono subwoofer amplifier. 75 watts RMS x 1 at 4 ohms (150 watts RMS x 1 at 2 ohms). 300 watts RMS x 1 at 1 ohm. CEA-2006 compliant. Boosted Rail amp technology. Dynamic Thermal Management cooling system. variable low-pass filter (35-250 Hz, 12 dB/octave). differential-balanced inputs eliminate noise from your vehicle's electrical system. preamp and speaker-level inputs. optional wired remote bass boost (0-18 dB at 45 Hz). 10-gauge power and ground leads and a 30-amp fuse recommended — wiring...

4-channel car amplifier. 75 watts RMS x 4 at 1.5 to 4 ohms. 150 watts RMS x 2 at 3 to 8 ohms. Regulated, Intelligent Power Supply system. Differential-balanced inputs. Variable high- and low-pass filters (50-5000 Hz, 12 or 24 dB/octave). Absolute Symmetry Class-AB amplifier design. MOSFET power and output stages. Speaker- and preamp-level inputs (speaker-level input requires an optional adapter). 4-gauge power and ground leads and a 40-amp fuse recommended wiring and hardware not included...

Number of channels 4. Amplifier class AB. Mono bridge mode 4 ohm 2 x 220 W RMS. Output power in 2 ohm 4 x 110 W RMS. Output power in 4 ohm 4 x 75 W RMS. Damping factor > 200. S/N ratio, A-weighted > 100 dB. Frequency range 10 Hz - 50 kHz. Input sensitivity 0,2 - 7 V. Input impedance > 10 kohm. Input impedance, high level 330 ohm. Filters channel A & B HP: 20-150 Hz. Filters channel C & D HP: 20-150 Hz, LP: 40-125 Hz. Phase control for subwoofers 0-180 degrees (Ch. C&D). Remote bass...

3-Channel Class D System Amplifier, 75 W x 2 @ 4 Ω + 300 W x 1 @ 2 Ω - 14.4V This compact amplifier is ideal for a simple audiophile-grade, subwoofer / satellite system. With the XD500/3, you can drive a pair of quality component speaker systems with plenty of clean power, while also delivering a stout 300 W to your subwoofer system. The breakthrough that makes this much power possible in such a small chassis is our NexD™ switching design.The XD500/3 includes a 12 dB / octave high-pass filter for...

5-channel car amplifier. 75 watts RMS x 4 + 300 watts RMS x 1 at 4 or 2 ohms. 150 watts RMS x 2 + 300 watts RMS x 1 in bridged mode (4-ohm stable in bridged mode). CEA-2006 compliant. stackable installation design with front-panel controls. variable high- and low-pass filters (30-400 Hz, 12 dB/octave). quick-connect speaker connectors. Class-D amplifier design. MOSFET power and output stages. fuse rating: 30A x 2. 4-gauge power and ground leads recommended ?wiring and hardware not included...

Nickel-plated block terminals: Audiobahn uses nickel-plated block terminals to ensure increased productivity and maintaining proper connection. Because nickel is an ideal electrical conductor, the flow of power is essential in maintaining proper current flow through power connections. The nickel-plated block terminals provide a more efficient power transfer from output terminals to speakers and subwoofers and make a more solid and secure connection for all wires. Each terminal block is also encased...

DESCRIPTIONEncounter is the first step on the FUSION car audio journey. With value-packed performance and easy installation, Encounter’s distinctive green design is in-your-face and ready to perform.Encounter Amplifiers feature a distinctive green heatsink and are thermally dynamic to keep the components within accepted heat tolerances. They feature two-way protection for safety – thermal and short circuit - to prevent your amplifier from overheating - and screw down connectors for a secure bond...

Overview Why Car Audio Plus? After huge amounts of careful and detailed research, design, development and testing, TheLoudest.com are able to present a new item in their range of premium car amplifiers. Replacing the TL1092, this newer version is designed to provide more efficient qualities throughout. The TL-2093 Class AB Mosfet full range amplifier has a durable, precision-engineered, robust heavy-duty build that offers fantastic audio reproduction, and maintains such clear signal reproduction...

5-Channel Class D System Amplifier, 75 W x 4 @ 4 Ω + 300 W x 1 @ 2 Ω - 14.4V The XD700/5 is ideal for a complete audiophile-grade, subwoofer + four satellite system, and it fits comfortably in just about any vehicle. With this incredible little amplifier, you can drive two pairs of quality component speaker systems with plenty of clean power (75 W x 4 @ 4 Ω), while also delivering a stout 300 W of power to a subwoofer system. The breakthrough that makes this much power possible in such a small chassis...

2-Channel Class D Full-Range Amplifier, 100 W x 2 @ 2 Ω / 75 W x 2 @ 4 Ω - 14.4V This tiny amplifier packs a serious full-range punch, delivering a staggering 100 watts per channel into 2 ohms (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexD™ ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.The XD200/2 includes a 12 dB / octave filter which can be configured...

Overview Why Car Audio Plus? In Phase amplifiers have been designed to appeal to both the power enthusiast customer and also the discreet upgrade customer. Starting on the outside, all amplifiers in the range feature a stunning black crackle effect metal casing along with matching screw on end caps for a fantastic install. The amplifiers feature an ultra bright LED to denote power and protection modes. In normal use a cool blue glow will be emitted from the LED. Each In Phase amplifier is hand...

6-Channel Class D Full-Range Amplifier, 100 W x 6 @ 2 Ω / 75 W x 6 @ 4 Ω - 14.4V This incredibly flexible amplifier packs a serious full-range punch and delivers a staggering 100 watts to each of its six channels into 2 ohms (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexD™ ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.With the XD600/6, you have...

Overview Why Car Audio Plus? In Phase amplifiers have been designed to appeal to both the power enthusiast customer and also the discreet upgrade customer. Starting on the outside, all amplifiers in the range feature a stunning black crackle effect metal casing along with matching screw on end caps for a fantastic install. The amplifiers feature an ultra bright LED to denote power and protection modes. In normal use a cool blue glow will be emitted from the LED. Each In Phase amplifier is hand...

Affordable power amplifier for project and commercial recording studios, broadcast and post-production control rooms. Height: 2 RU. Rated output per channel: 4 ohms - 75 watts RMS per channel. Rated output per channel: 8 ohms - 45 watts RMS per channel. Rated output per channel: 8 ohms - 150 watts RMS, bridged mode. Signal to Noise Ratio: >105dB. Frequency Response: 10Hz - 70kHz +0, -3dB. Distortion: < 0.02% @ 4ohms, 20Hz - 20kHz. Input Sensitivity: +4dB for rated output. Crosstalk: 85dB...

The PRIME R600-5 is a 5-channel amplifier designed to run an entire car audio system! The R600-5 produces up to 75 Watts into each of its four channels with a dedicated subwoofer channel capable of producing 300 Watts into 2-Ohms. 12dB/octave crossover 2/4 channel switch Infrasonic filter 0_/180_ Phase Switch 1 Year Standard Warranty

Sorry, this product has been discountinued. please call us for alternatives

4-channel car amplifier. 75 watts RMS x 4 at 4 ohms. non-bridgeable, 4-ohm stable per channel. Boosted Rail amp technology. Dynamic Thermal Management cooling system. selectable high- and low-pass filters (80 Hz, 12 dB/octave). differential-balanced inputs eliminate noise from your vehicle's electrical system. preamp and speaker-level inputs. 10-gauge power and ground leads and a 30-amp fuse recommended — wiring and hardware not included with amplifier. no onboard fuses — when installing...