Radial Engineering : 76 results priced between £50.00 and £400.00

Radial Engineering 8 OX, 8-channel Mic/Line Splitter 19",1 unit, XLR inputs, D-Sub outs and phönix installation clamps

Radial Engineering Firefly DI, 1 channel Tube-Di-Box for Studio and Live application, Class A Front End drives 12AX7 Tube, 2x 6,3mm Jack Input, 2x 6,3mm Jack Thru, 2x 6,3mm Jack Tuner out, switchable Gnd-Lift, switchable phase 180°, switchable Thru-Put to switch between original- and Signal with Tube, Drag Control Load Connection for automatc impedance correction with the impedance of the Instrumenten-Pickups, adjustable Low Cut, handle made of metall on the top PA/Live Equipment / Accessories for...

Radial Engineering J+4, Stereo Line Driver, 3,5mm stereo jack Input, 2x 6,3mm Jack Input, 2x RCA Input, adjustable Input-Gain, switchable LowCut, switchable Gnd-Lift, hard metall housing, 2x XLR out, very low noise, Power supply Included

Radial Engineering Tonebone Bones Texas - 2-channel effects pedal for electric guitar. Tone control, 3-stepped kick-control for mid-boost, 3-stepped bite-control for presence adjustment, separate level controls. Guitars, Basses, Amps / Floor Effects

Radial Engineering Pro DI Box - 15dB pad, frequency response: 20Hz-18kHz, ground lift switch, jack in/output, XLR output, especially suitable for active acoustic guitars and bass guitars.

The J48 is an active 48V phantom powered direct box featuring a -15dB pad, 180º polarity reverse, a merge function to mix two signals to mono, an 80Hz high-pass rumble filter, and ground lift. The design is optimised to produce maximum headroom while working within the limited current available from standard 48V phantom power. By employing a switching power supply, the J48 is capable of peak transients to 9 volts without choking. The result is reduced harmonic distortion and significantly improved...

Radial Engineering JDV MK3, professional acitv DI-Box of the high end class, Input A+B, 2x Aux out, 1x direct thru out, 1x tuner out, 1x XLR male out, 30 db pad switch, switchable Low cut on 80 Hz and High cut on 7 KHz, Input A/B switch for the inputs, Impedance leveler, 3 LED's for Power, Signal and Clip, incl. external powersupply

Radial Engineering MC-3, passive Monitor-Controller with a large choice of connections and switches, 2x Mono-Jack, switchable balanced / unbalanced, 2x Monitor (A and B - each adjustable) out, Subwoofer out (switchable phase 180°), Aux Out, 2x Headphones out, 2x 6,3mm 1x 3,5 mm Mini Jack), Dim/Mute switch (adjustable), Mono-Switch, Master-Level Potentiometer PA/Live Equipment / Accessories for PA Systems

Radial's ProDI uses custom audio transformers to achieve exceptional signal handling without saturation and with extremely low phase distortion in the critical bass and mid regions. • Metal case • -15dB pad • 1/4" input • 1/4" thru

Radial Engineering Pro AV1, one channel passive DI-Box with Stereo-to-Mono-mix, 6.3mm jack plug for instruments, jack Thru, 3.5mm-jack input, RCA in/out for -10dB-Consumer-Hardware, XLR-Input, balanced XLR out PA/Live Equipment / Accessories for PA Systems

Radial Engineering R15DC-EU, powersupply for Radial X-Amp, Re-Amp

Radial Engineering SB-5, Stage Bug, 2 channel active DI-Box especially for Laptops, reduces noise, fixed 1,5m 3,5 mm Stereo jack cable, 2x Jack out, XLR out, switchable 15 dB Pad, switchable Gnd/Lift, grey metall housing PA/Live Equipment / Accessories for PA Systems

Radial Engineering Tonebone Bigshot EFX the little brother of the Loopbone, passive construction, Loop 1 and Loop 2 alone and together selectable, Ground Lift, Loop2 can be take as Tuner Output

Radial Engineering J 33 - phono preamp with RIAA and DI box, stereo RCA input, jack and RCA output, powered via 48V phantom power or the included power supply. PA/Live Equipment / Accessories for PA Systems

Radial Engineering Radial R42DC-EU, powersupply for Radial JDV & JDX

Radial Engineering JDI Duplex Mk4, prof. stereo DI-Box with Jensen® JT-DBE, jack in, RCA in, jack/RCA thru and XLR in per channel, High-Cut (10 KHz), Pad (-15 dB) and Merge per channel, XLR in/out, phase reverse 180° per channel, Ground/Lift PA/Live Equipment / Accessories for PA Systems

Radial Engineering Tonebone Trimode Overdrive Pedal, with 12AX7 Tube for first class tubesound, 2 independent adjustable channel, natural Dynamic, adjustable Mid Boost each channel, Effect Loop for Lead channel, True Bypass, incl. AC Adapter

Radial Engineering HotShot DM1, microphone muteswitch and splitter as footpedal, for dynamic microphones, switchable GDN-Lift, XLR in/out, also as Talkback between musician and crew or to mute Hardware as Vocalists etc.

Radial Engineering JD7, 19" Linemixer for guitarsystems, 2x Input, 7x Output, jack in/out, -8 dB Pad per Inputchannel, Ground/Lift and on/off per output, eEffectloop in/out, balanced Line-input (XLR) and balanced XLR out, 19" 1 unit

Radial Engineering JDI - professional passive DI box with input jack, jack thru, XLR out, switchable -15dB pad, ground lift, merge to sum, two line inputs (input + thru) to the XLR out, switchable speaker simulation for 12" speaker cabinets, phase reverse.

Radial Engineering JPC, professional acitve/passive DI-Box especially designed for PC-Soundcards and AV, Input RCA L/R, RCA Thru, 6,3 + 3,5 mm stereo-jack input with -10 dB, XLR L/R out, switchable Pad -10 dB, Ground Lift, 48 V phantom, can be used passive or active to drive long cable runs with phantom power

Radial Engineering JR 5, Remote Footswitch for Radial Engineering JX 44, 4 heavy duty foot switches to select the channels, one Mute Switch to mute the amplifier output, XLR In

Radial Engineering JX 44, 4 Kanal guitar spliter, 4x Jack Rear Inputs, 2x Jack Front Input with priority switch, 6x Amp Out, channel 3/4 Dual Parallel, Footswitch Remote Control, Footswitch out Mute and Tuner, internal DI-Box, SGI Interface for long cable up to 100m, X-Amp Reamper, Effect Loop in out, 19" 1 U

Radial Engineering Pro RMP - passive re-amping box for re-recording signals. Suitable for vocals, guitar, bass and percussion. XLR in/out.Output Level control

Radial Engineering Pro-D8, eight channel stereo Di-Box for Keyboards and playback engines, 2x Jack in per channel, Insert and Thru, 15 dB Pad per channel, XLR out, switchable GND Lift per channel, 180° Phase reverse per channel, rotateable Rackmount, 19" 1U

The ProAV2 is a passive DI box with a variety of stereo inputs including 1/4" for instruments, RCA and 1/8" connectors for consumer electronics and computers, and a +4dB XLR input for professional systems. Custom-wound transformers are employed to withstand high temperatures, while maintaining linear frequency response between 20Hz and 18.5kHz. • 1/4", 1/8", RCA and XLR inputs • Stereo XLR outputs • Ground lift • -15dB pad

Radial Engineering PZ-DI, Orchestral DI, active DI, piezo optimized Input for orchestral instruments, Acoustic guitar, acoustic-Bass, 48 V Phantom, jack in, jack out, XLR out, switchable 15 dB Pad, switchable 180° Phase, switchable Grnd/Lift, adjustable Low Cut, switchable 3 KHz High Cut, adjustable load for piezo and magnetic pickups, metall housing

Radial Engineering SB-1, Stage Bug, active DI-Box especially for Acoustic-Guitar, 48 V Phantom, Jack in, Jack out, XLR out, switchable 15 dB Pad, switchable 180° Phase reverse, blue metall housing

Radial Engineering SB-2, Stage Bug, passive DI-Box especially for Bass, Acoustic-Guitar and Keyboard, Jack in, Jack out, XLR out, switchable 15 dB Pad, green metall housing

Radial Engineering SB-4, Stage Bug, active DI-Box especially for orchestral Piezos, smoothes out peaks, 48 V Phantom, Jack in, Jack out, XLR out, switchable 15 dB Pad, switchable 180° Phase reverse, brown metall housing

Radial Engineering SGI, Studio Guitar Interface for use long wires between guitar and amp (up to 100 meters) contains 2 moduls (Input - Output), XLR in/out + Klinke in/out, incl. 15 V DC powersupply

Radial Engineering Tonebone Bassbone Bass Preamp, 2 channel, for 1 or 2 Basses, adjustable Volume eaxh Channel, Contour-control with Flat + two EQ settings for Channel 1, 3 Band EQ for Channel 2, Boost function to 8db, Effect Loop, Di-Output with XLR Output, Tuner Output, incl. AC Adapter

Radial Engineering Tonebone Bigshot iO True Bypass Instrument Selector, passive construction, Tuner Output with Mute Switch,for two Instruments alternative on the same Amp

Radial Engineering Tonebone TBR15 Power Supply 220V In / 15V DC Out, 400 mA, suitable for Trimode, Plexitube, Classic, Hot British, Bassbone, Switchbone, Loopbone, Headbone, Cabbone, PZ-PRE 2 Guitars, Basses, Amps / Misc. Acessories