Sandberg Serial ATA internal to external adapter : 26 results priced between £2.00 and £75.00

This eSATA plate (low profile) adds external data support to any existing Serial ATA (SATA) controller, allowing you to connect external SATA (eSATA) storage to a computer. With support for data transfer rates of up to 300MBps, this external SATA plate allows you to take advantage of the increased data integrity provided by external hard drives or RAID devices that support eSATA connections. Connecting eSATA storage couldn't be simpler. Just install the plate into an open I/O low profile slot on...

PCI Express card USB 3.0 with Low profile bracket Connector External: 2 x USB 3.0 type A internal: 1 x 19 pin USB 3.0 pin header +1 x SATA power connector Data transfer rate up to: Super-Speed 5 Gb/s PCI Express x1, Supports PCI Express 2.0 Windows XP/XP-64/Vista/Vista-64/7/7-64

Description The eSATA adapter extends motherboard's capabilities by adding external eSATA connector. The external eSATA port located at the back I/O provides smart setup and enables ultra fast (up to 3Gb/s) data connection with external eSATA devices.

Connectors: 1 external shielded eSATA Female connectors to 1 x internal SATA Latching Male connectors Features latch type SATA plugs which lock into place when used with compatible latching controller or device ports Can also be used with standard non-latching SATA ports Length: 25cm

ATTO ExpressSAS R348 ExpressSAS RAID Adapter (PCIe to 3GB SAS/SATA 4 External/4 Internal or 8 Internal)

INTERNAL-TO-EXTERNAL HEADSET ADAPTER KIT For 44mm I.D. Head Tubes with TAPERED Fork Steer Tubes Add "stack height" between the fork crown and head tube to slacken the head angle, compensate for "sag" preferences, add clearance for fork adjustment knobs, run a "tapered" fork with your 44mm head tube... Includes complete lower assembly: Crown Race 1.5 1.5 ACB Bearing, SS External Cup PLEASE NOTE ONLY BLACK IN STOCK

Dual Hi-Speed SATA 1.0 INterface Supports UDMA 33/66/100/133 IDE HDD and ATAPI Devices Built-in RAID 0 and 1 Support First both standard and low profile PCI SImple Plug and Play, No Drivers Required

SCSI ADAPTER 50M INTERNAL TO 50F EXTERNAL [P/N SC-2050-10]

Serial ATA Power adapter Serial ATA Power adapter

Good Points + A perfect addapter when the motherboard does not have enough internal USB connections or saves clogging up a double connection when fitting a front case hub or cardreader. Bad Points − None

In many cases, and various panels for the front panel there is still so that the local ports for connecting USB 3.0 devices can not be connected internally to the motherboard. Instead, there are USB plug type A male used to be led out through the rear wall to be outside of the back plugged into the motherboard socket type A female. Until now. Now there's a practical solution from Akasa for all stakeholders who have a motherboard with internal USB 3.0 headers, but are far too cumbersome on the rear...

Slot plate for using internal Serial ATA ports. Enables easy connection of external Serial ATA devices.

Premium sleeved cables into your rig is enhanced cable management which is crucial for optimal airflow. Use these extension cablesm to extend you cables for better routing, enchancing airflow and making your system better looking overall.

Akasa AK-CBUB06-60BK cable adapter transforms motherboard USB header to external USB port. 60cm black sleeved cable with 4-pin internal female block connector for connecting to motherboard USB header and external USB type-A port for connecting a USB device. Can be used internally or as a DIY external port anywhere on the PC case with screws mounting provided.

Idea to convert the internal four SATA Ports (PC or Server) into one external Multi-Lane 4x SATA Port.

This combo card lets you run serial ATA drives and / or ultra ATA 133 drives in the same system at the same time, this is the perfect card for flashing all xbox 360 dvd-rom drives if your pc doesnt already have the via VT6421a chipset in it.It allows you to connect one External SATA Hard drive or SATA Caddy Xbox 360 DVD Rom two internal SATA HDD, and one Internal IDE 133 Hard drive (Ultra DMA).

Description Add two eSATA ports to your PC, extended from internal Serial ATA connection ports. The ESATAPLT2M Internal to External SATA to eSATA Plate Adapter adds external data support to any existing Serial ATA (SATA) controller, enabling you to connect eSATA storage to a computer. With support for data transfer rates of up to 6Gbps, this external SATA plate lets you take advantage of the increased data integrity provided by external hard drives or RAID devices that support eSATA connections...

Recorder USB 2.0 ports quantity 1 Ports & interfaces Output interface 3.5 mm, HDMI Technical details Colour of product Black RoHS compliance Yes Source data-sheet Icecat.biz Packaging content Cables included USB Other features Internal No Connectivity technology Wired Weight 0.4 kg Host interface USB

The ESATAPLT2M Internal to External SATA to eSATA Plate Adapter adds external data support to any existing Serial ATA (SATA) controller, enabling you to connect eSATA storage to a computer. With support for data transfer rates of up to 6Gbps, this external SATA plate lets you take advantage of the increased data integrity provided by external hard drives or RAID devices that support eSATA connections.

Description StarTech 2 Port Low Profile SATA to eSATA Plate Adapter - F/M Add two eSATA ports to your PC, extended from internal Serial ATA connection ports. The ESATAPLT2LPM SATA to eSATA Plate Adapter (low profile/half-height) adds external data support to any existing Serial ATA (SATA) controller, enabling you to connect external SATA (eSATA) storage to a computer. With support for data transfer rates of up to 6 Gbps, this external SATA plate lets you take advantage of the increased data integrity...

IDE-SATA20 is ideally suited for tailgate interface applications for converting Serial ATA device into ATA device. Both ATA and ATAPI modes are supported using the same firmware.

IDE-SATA07 is ideally suited for tailgate interface applications for converting Serial ATA device into ATA device. Both ATA and ATAPI modes are supported using the same firmware.

Compliant with USB 2.0 and SATA (Serial ATA) 1.0a Specifications. Compliant with USB Mass Storage Class Bulk-Only Transport Specification. Supports combo connectors IDE (40pin & 44pin) for 2.5” / 3.5” /5.5” IDE & SATA devices. Turns an internal IDE/SATA hard drive or CD/DVD-ROM into an external USB device. Operates IDE and SATA devices simultaneously. Compliant with Windows 98SE/ME/2000/XP/2003 Server Mac OS X. Plug & Play for easy Installation.

Compliant with USB 2.0 and SATA (Serial ATA) 1.0a Specifications. Compliant with USB Mass Storage Class Bulk-Only Transport Specification. Supports combo connectors IDE (40pin & 44pin) for 2.5” / 3.5” /5.5” IDE & SATA devices. Turns an internal IDE/SATA hard drive or CD/DVD-ROM into an external USB device. Operates IDE and SATA devices simultaneously. Compliant with Windows 98SE/ME/2000/XP/2003 Server Mac OS X. Plug & Play for easy Installation.

Mini SAS Adapter works with all internal SAS interface and external Multilane SAS or SATA interface, converting one internal mini SAS 36pin connector for four SAS/SATA internal channels with 3.0Gb/s of data transfer rate of one physical cable combining 4-channel SAS/SATA signals into external mini SAS 26pin conneector for hi-speed application.

Quad Mini SAS Adapter works with all internal SAS interface and external Multilane SAS or SATA interface, converting four internal mini SAS 36pin connector for four SAS/SATA internal channels with 3.0Gb/s of data transfer rate of four physical cables combining four sets of 4-channel SAS/SATA signals into four external mini SAS 26pin connectors for hi-speed application.