Smoke Alarms : 1406 results priced between £5.00 and £75.00

230V mains powered smoke and heat alarms. Available in three versions: Ionisation smoke alarm (Ei151TL) for fast flaming fires - used on landings, offices Optical smoke alarm (Ei156TLH) for slow smouldering fires - used in bedrooms, living rooms and downstairs hallways Heat Alarm (Ei154TL) - used in kitchens and garages. Sealed lithium back-up battery. 5 year warranty. Up to 12 units can be interconnected by wire. Low power cell warning in the event of mains or cell failure. Easy to use test...

Manufacturer: Sprue Safety Products

The RESitech range of mains powered smoke and heat detectors are ideal for use in residential and domestic applications. Up to 20 detectors can be interconnected by wire within a single system, with the option of wireless interconnection when used in conjunction with the RESitech wireless base . The detectors have a 5 year guarantee.

Mains powered with alkaline back-up battery. Fully conforming to BS 5839-6:2004 Grade D, E and F. Kitemarked and CE marked. 6 year warranty. Up to 24 units can be interconnected. Slimline units. Very easy installation. LED display. Test/Hush button. Low battery warning chirp.

White. Pack of two micro smoke alarms. Battery powered. Battery supplied. Easy installation. Test button to check battery and alarm operation. Ionisation technology which are quicker at detecting fast flaming fires. Flashing red light to indicate the unit is powered on. 3 year Warranty. CE marked. BSI Kitemarked BS5446 (Part 1) 2000. Compact diameter.

Test button and LED allow simple verification of battery and alarm operation. Warning chirp sounds when smoke alarm battery needs replacement. Utilises a state-of-the-art ionisation sensor. Loud 85 decibel alarm alerts you of danger. Mounting bracket allows for fast and easy installation (mounting screws included). Tamper-resist pin inhibits tampering of smoke alarm and battery removal. Ionisation alarms may be quicker at detecting fast flaming fires.

Senior fire officers from the North Wales Fire and Rescue Service are appealing to the public to recognise the importance of having a working smoke alarm fitted in their homes following the inquest into the death of a man who died in a fire in Llandudno earlier this year.

Smoke alarms High quality Smoke alarms for the Workplace Smoke alarms designed to give a loud audible alarm 85dB(A) at 3m, when smoke is detected Quick and easy to install powered by a 9v battery Each alarms has a test button and bleeps when the battery needs replacing Leadtime: 10 days

Compact size - only 4". Approved to EN14604. Loud 85dB alarm. Easy to install. Test/Reset button. Hush feature. Low battery warning. Mounting bracket. Batteries included.

Smoke and carbon monoxide alarms Loud alarms Easy to fit and use Compact design

There are two types of fire - Fire Smouldering and Fast Flaming. Sources of smouldering fires may include: Cigarettes burning in furniture or bedding. Sources of flaming fires may include: Paper burning in a waste basket, Kitchen grease fire such as a chip pan. Photoelectric alarms respond faster to smouldering fires which produce large smoke particles compared to flames and heat from flaming fires. For best protection homes should have both types of smoke alarm. It's IMPORTANT to note: ALL...

Easy installation. Not for outdoor use. Do not use in damp or wet conditions. Test your smoke alarm on a weekly basis by pressing the test button. Uses 3 x lithium button cell CR2450 (included).

Please note that this is an end of line item and stock may not be guaranteed.

White. Pack of two micro smoke alarms. Battery powered. Battery supplied. Easy installation. Test button to check battery and alarm operation. Ionisation technology which are quicker at detecting fast flaming fires. Flashing red light to indicate the unit is powered on. 3 year Warranty. CE marked. BSI Kitemarked BS5446 (Part 1) 2000. Compact diameter.

FlareSafe is robust, water-resistant Travel smoke detector, includes batteries (2 x AA and 1 x lithium CR123A) two of the batteries operate all of the functions and the lithium is a back up incase the main batteries go dead, so you are always covered. It weighs just 230 grams (around eight ounces). It is 15cm long and 4.5cm wide. It has been designed and made in the UK with the safety of backpackers in mind. Also great for caravans, tents and travelling anywhere.Br> It also comes with a three-year...

Battery powered alarms give a high pitched noise (85 Db at 3m) when smoke is detected. Low battery warning feature. Supplied complete with 9v battery. Available with or without escape light. Certified to BS5446 Part1:1990.

750MRL OPTICAL SMOKE BRK Reduces nuisance alarms.Detects slow smouldering fi res quicker.Ideal for hallways, landings andliving areas. Test / silence button.BS EN 14604: 2005 DESIGNED FORPROFESSIONALSBY PROFESSIONALSIntroducing the 700 SERIES with PUSH-FIT. A quick,easy & cost effective method of 230V fi re alarm installationwith a choice of battery back-up. Each alarm is guaranteedfor 5 years and up to 12 smoke and heat units can beinterconnected together for maximum protection. MRL BACK-UPLong...

The CB232 mounting facility can be used across a wide range of 230V alarms. This pattress is designed to save you time and effort when installing a smoke or heat alarm. To this end the CB232 features both top and side entry points with more than enough space for wiring and trunking installations. This mounting base is designed for all surfaces.

Low profile for a neater installation. Colour coordinated to match the alarm. Easy to fix. Robust ABS design. Œ.

The Kidde Slick mains powered smoke and heat alarms can be interlinked wirelessly by radio-signal. When one detector sounds, it sends a signal to all the other units in the system and sounds those ones as well. The radio interlink technology means that no wiring is required in between each unit. The mains powered detectors come with an alkaline back-up battery. This allows for the units to continue to function in the event of a mains power failure.

Mains powered smoke alarm range which can be interconnected. The interconnection sets of all alarms if one detector senses smoke/fire. These installations conform with BS5839 part 6 Grade D, as required for extensions, many HMOs and small businesses. The Ei140 series succeeds the discontinued Ei130 series smoke alarms.

CE marked. Certified to BS EN14604:2005. Fully conforming to BS5839-6:2004 Grade F. LPCB certified. 5 year warranty. Flashing red light to indicate unit is powered.

AC/DC operated & battery backup. 5 year guarantee. Photoelectric sensor. Hush/test feature - 10 minute desensitise. High and stable sensitivity. Quick fix mounting bracket. Easy installation. Tamper-resist feature. Interconnectable up to 20 units. Extra loud alarm sound over 85dB. Low-battery and missing battery warning indicator. Auto reset when smoke clears.

Details Smoke and carbon monoxide alarms Loud alarms Easy to fit and use Compact design

The mains powered Kidde Firex detectors are a range of smoke and heat alarms which can be interconnected using standard 3 core and earth cable. By interconnecting smoke and heat detectors this allows for an alarm to be heard throughout the property, as all units within the system sound when any one of the detectors are activated. The Kidde Firex range are mains powered with an alkaline back up battery supplied as standard.

Manufacturer: Ei Electronics

Reference: TBKIDFSDU1. Brand: Kidde. Manufacturer Reference: FSDUCOSM1-UK. Delivery: Approx 5 Working Days. Condition: New. Guarantee: 1 Year.

The RESitech mains powered radio-interlinked smoke and heat alarms are supplied complete with a wireless base. When each detector is installed using the RESitech wireless base , the interconnection between the detectors is achieved wirelessly by radio-signal. The wireless interconnection reduces the amount of work for the electrician, saving installation time and cost.

750MBX BRK OPTICAL SMOKE Reduces nuisance alarms.Detects slow smouldering fi res quicker.Ideal for hallways, landings andliving areas. Test / silence button.BS EN 14604: 2005 DESIGNED FORPROFESSIONALSBY PROFESSIONALSIntroducing the 700 SERIES with PUSH-FIT. A quick,easy & cost effective method of 230V fi re alarm installationwith a choice of battery back-up. Each alarm is guaranteedfor 5 years and up to 12 smoke and heat units can beinterconnected together for maximum protection. MRL BACK-UPLong...

The CB300 pattress that comes with relay contacts, serves as the surface mounting appliance for 230V smoke and heat alarms. Where it is specifically applied is where a BRK Dikon smoke or heat alarm is meant to work, using a remote telemetry system or ancillary appliance like an automatic door with a release. This pattress has entries on both the top and the side making it easy to accommodate mini trunking installations and cable. The CB300 allows plenty of room for wiring in accomodation such as...

Low profile for a neater installation. Interlink connection. Colour coordinated to match the alarm. Easy to fix. Robust ABS design. Œ.

ALARM, SMOKE, LIVING AREA, WITH HUSH; Detector Type:Smoke; Approval Category:BS 5446 Part 1 2000; Colour:White; Sound Level SPL:85dBA