Tonepros
[62 results priced between £25£100]

Sort:
62 Tonepros £25 £100 /l/Tonepros
  • TonePros T1Z-B Black Tailpiece Metric
    TonePros T1Z-B Black Tailpiece Metric

    TonePros T1Z-B Black Tailpiece Metric, String Holder to block, metric Model for asian and lots of USA Models

  • TonePros VNS1 N Locking Studs
    TonePros VNS1 N Locking Studs

    I bought these after fitting a PigTail Intonable Wrap-around Bridge to my Gibson LP Jr. The bridge tilted up at a bit of an angle so I bought these to clamp it down parallel to the body. They fit the Gibson imperial studs that were in the guitar so no modification was required. Simply remove and replace old with new, simple as that.

  • TonePros TP6 G Nashville Bridge G
    TonePros TP6 G Nashville Bridge G

    TonePros TP6 G Nashville Bridge gold with un-notched saddles that secures solidly to your guitar. Bridge width 74,42 mm, Finish Gold

  • TonePros Wraparound "G" Style Set / Nickel
    TonePros Wraparound "G" Style Set / Nickel

    Wraparound bridge assembly matched with a standard cap (AVT2G) set of Locking Studs. Set includes TonePros 'Heighten & Tighten' adjustment tool for our patented Locking Studs. Tonepros new AVT-II is currently the only locking, Piezo loadable, standard saddle, fully intonatable wraparound bridge in the world. Fits USA and metric guitars fitted with stud mount bridges with standard center stud spacing.

    £89.95
    stringsdirect.co.uk
  • TonePros AVR2 2/G
    TonePros AVR2 2/G

    TonePros AVR2 2/G Tune-O-matic Bridge, lockable, for Vintage LP/SG/335, alternate for ABR-1, Bolt spacing 7,36cm, incl. Allen Key, Finish Gold

  • TonePros AVR2 2/C
    TonePros AVR2 2/C

    TonePros AVR2 2/C Tune-O-matic Bridge, lockable, for Vintage LP/SG/335, alternate for ABR-1, Bolt spacing 7,36cm, incl. Allen Key, Finish Chrome

  • TonePros Wraparound "P" Style Set / Nickel
    TonePros Wraparound "P" Style Set / Nickel

    Wraparound bridge assembly matched with a large cap (AVT2P) set of Locking Studs. Set includes TonePros “Heighten & Tighten” adjustment tool for our patented Locking Studs. Tonepros new AVT-II is currently the only locking, Piezo loadable, standard saddle, fully intonatable wraparound bridge in the world. Fits USA and metric guitars fitted with stud mount bridges with standard center stud spacing.

    £89.95
    stringsdirect.co.uk
  • Vox Footwear TonePros LPM04 Bridge + Tailpiece Set - Chrome
    Vox Footwear TonePros LPM04 Bridge + Tailpiece Set - Chrome

    Locking version of the Nashville type. Standard small post. Standard threaded insert. Pre-notched saddles for quick installation. Direct retro-fit for most USA guitars without modification. Patented pinch freezes and solidifies your bridge and tailpiece. Stays solidly set without movement. Improves intonation, sustain, and tuning stability. Mount on vintage instruments without marring or modification.

    £79.00
    astrings.co.uk
  • TonePros TP6 C Nashville Bridge CH
    TonePros TP6 C Nashville Bridge CH

    TonePros TP6 C Nashville Bridge chrome with un-notched saddles that secures solidly to your guitar. Bridge width 74,42 mm, Finish Chrome

  • TonePros AVR2 2/N
    TonePros AVR2 2/N

    TonePros AVR2 2/N Tune-O-matic Bridge - lockable bridge for vintage LP/SG/335 type guitars, alternate to Gibson ABR-1, 7.36cm bolt spacing, includes Allen key. Finish: Nickel

  • Vox Footwear TonePros LPM04 Bridge + Tailpiece Set - Gold
    Vox Footwear TonePros LPM04 Bridge + Tailpiece Set - Gold

    Locking version of the Nashville type. Standard small post. Standard threaded insert. Pre-notched saddles for quick installation. Direct retro-fit for most USA guitars without modification. Patented pinch freezes and solidifies your bridge and tailpiece. Stays solidly set without movement. Improves intonation, sustain, and tuning stability. Mount on vintage instruments without marring or modification.

    £79.00
    astrings.co.uk
  • TonePros LPBM04 BK
    TonePros LPBM04 BK

    TonePros LPBM04 B Tuneomatic Stringholder Set - bridge and stop bar tailpiece, includes locking studs with standard thread and lockable stud, 74.42mm bridge width, includes Allen key. Colour: Black

  • TonePros AVT2M CH
    TonePros AVT2M CH

    ** Note: This article was given an average rating of 4.15 out of 5 stars. In total, 1 text ratings were submitted. The customer ratings shown here exclusively reflect the personal opinion of the customer concerned. Every customer can change or remove his rating at anytime. All rights to the contents of the rating remain with the customer.

  • TonePros Standard US Thread "G" Style / Nickel
    TonePros Standard US Thread "G" Style / Nickel

    Tonepros locking Studs are designed to lock down any wraparound bridge or stop tailpiece. Tonepros locking studs provide 100% of the contact area of the bottom flange, 100% of the contact area of the stud top, no lean, and components that are completely locked solid to the guitar body.

    £29.99
    stringsdirect.co.uk
  • Vox Footwear TonePros LPNM04 Bridge + Tailpiece Set - Nickel
    Vox Footwear TonePros LPNM04 Bridge + Tailpiece Set - Nickel

    Locking version of the Nashville type. Standard small post. Standard threaded insert. Pre-notched saddles for quick installation. Direct retro-fit for most USA guitars without modification. Patented pinch freezes and solidifies your bridge and tailpiece. Stays solidly set without movement. Improves intonation, sustain, and tuning stability. Mount on vintage instruments without marring or modification.

    £79.00
    astrings.co.uk
  • Vox Footwear TonePros LPM04 Bridge + Tailpiece Set - Black
    Vox Footwear TonePros LPM04 Bridge + Tailpiece Set - Black

    Locking version of the Nashville type. Standard small post. Standard threaded insert. Pre-notched saddles for quick installation. Direct retro-fit for most USA guitars without modification. Patented pinch freezes and solidifies your bridge and tailpiece. Stays solidly set without movement. Improves intonation, sustain, and tuning stability. Mount on vintage instruments without marring or modification.

    £79.00
    astrings.co.uk
  • TonePros T3BP-C
    TonePros T3BP-C

    TonePros T3BP-C Tune-o-matic Bridge - Nashville-style bridge, for USA models with 4mm small bolts, replacement for ABR-1, 10.4mm string spacing, 2.913" (74cm) bolt distance, 4mm bolts. Colour: Chrome

  • TonePros T3BP-B
    TonePros T3BP-B

    TonePros T3BP-B Tune-o-matic Bridge - Nashville-style bridge, for USA models with 4mm small bolts, replacement for ABR-1, 10.4mm string spacing, 2.913" (74cm) bolt distance, 4mm bolts. Colour: Black

  • TonePros T1ZSCTailpiece
    TonePros T1ZSCTailpiece

    TonePros T1ZSC Tailpiece Zoll- string holder to block. Zoll model for USA models, chrome satin

  • TonePros Replacment ABR-1 Tune-o-matic Bridge Nickel
    TonePros Replacment ABR-1 Tune-o-matic Bridge Nickel

    This model is the exact replacement for the bridges found on older or vintage instruments originally fitted with ABR-1 style bridges. This locking model has the complete appearance of the vintage part, but has many upgrades including more intonation range, and saddles that are "engineered in" solid, preventing "lift" against the retainer wire. Retrofit for most Vintage and reissued USA guitars without modification. Extra tight construction eliminates rattles and improves sustain.

    £49.95
    stringsdirect.co.uk
  • TonePros LPBM02 B Tuneomatic Set Black
    TonePros LPBM02 B Tuneomatic Set Black

    TonePros LPBM02 B Tune-O-Matic Set - bridge and stop bar tailpiece, includes locking studs with metric thread, 74.42mm width, includes Allen key. Finish: Black

  • TonePros LPCM02 C Tuneomatic Set Chrome
    TonePros LPCM02 C Tuneomatic Set Chrome

    TonePros LPCM02 C - tune-o-matic bridge/tailpiece set, includes locking studs with metric thread and lockable stud, includes Allen key. Bridge Width: 74.42mm. Finish: Chrome

  • TonePros LPCM04 C Tuneomatic Set Chrome
    TonePros LPCM04 C Tuneomatic Set Chrome

    TonePros LPCM04C - tune-o-matic bridge/tailpiece set, includes locking studs with standard thread and lockable stud, includes Allen key. Bridge Width: 74.42mm. Finish: Chrome

  • TonePros LPGM02 G Tuneomatic Set Gold
    TonePros LPGM02 G Tuneomatic Set Gold

    TonePros LPGM02 G Tune-o-matic String Holder Set - bridge and stop bar tailpiece, locking studs with metric thread and lockable stud. Bridge width: 74.42mm. Includes Allen key. Colour: Gold Plated

  • TonePros LPGM04 G Tuneomatic Set Gold
    TonePros LPGM04 G Tuneomatic Set Gold

    TonePros LPGM04 G Tuneomatic Set Tuneomatic-Stringholder Set, Gold, Set includes Bridge and Stop Bar Tailpiece, inclusive Locking Studs with lockable Stud, Bridge width 74,42mm, incl. Allen key, Finish Gold plated

  • TonePros LPNM02 N Tuneomatic Set
    TonePros LPNM02 N Tuneomatic Set

    TonePros LPNM02 N Tune-o-matic Bridhe Set - includes bridge and stop bar tailpiece, locking studs with metric thread and lockable stud, includes Allen key. Bridge width: 74.42mm. Finish: Nickel

  • TonePros MSPRS C Locking Studs
    TonePros MSPRS C Locking Studs

    TonePros MSPRS C Locking Studs metric, P-Style Locking Studs,for Wrap around Bridge, lockable Studs for warap around Bridge with metric thread, incl. installation wrench, Finish chrome

  • TonePros T1Z C Chrom Tailpiece Metric
    TonePros T1Z C Chrom Tailpiece Metric

    TonePros T1Z-C Chrome Tailpiece Metric, String Holder to block, metric Model for asian and lots of USA Models

  • TonePros T1ZSA-CH ChromeTailpiece Zoll
    TonePros T1ZSA-CH ChromeTailpiece Zoll

    Ben from the UK: "I am very impressed with the speed of delivery and the product is excellent - I am one very happy customer !"

  • TonePros T3BP-G Tune-o-matic BridgeZoll
    TonePros T3BP-G Tune-o-matic BridgeZoll

    TonePros T3BP-G Gold, Tune-o-matic Bridge Zoll, Nashville-style Bridge, Zoll-Model for USA Models with 4 mm small bolts, Replacement to Original ABR-1, Stringwidth. 10,4 mm, Boltsdistance: 2,913" = 7,4 cm, Botsdimension: 4 mm, Color: Gold