Toupret : 22 results priced between £2.00 and £50.00

This is a rapid drying filler to replace the old Toupret Rapide. It can be used as thick as you like, as a filler or texture. It will be set after 40minutes [at 20°] and ready to rub down or overcoat in less than 3 hours. It will adhere to glazed ceramic tiles, old painted surfaces, brick, stone, primed timber, concrete etc. Once dry it can be screwed or nailed into.

Toupret White Glazing Putty is an interior and exterior linseed oil glazing putty. Suitable for bedding and glazing glasses. Use on previously primed timber. Sometimes also used for spot filling primed timber prior applying finishing coats.

This is a rapid drying filler to replace the old Toupret Rapide. It can be used as thick as you like, as a filler or texture. It will be set after 40minutes [at 20°] and ready to rub down or overcoat in less than 3 hours. It will adhere to glazed ceramic tiles, old painted surfaces, brick, stone, primed timber, concrete etc. Once dry it can be screwed or nailed into.

Toupret Fine Surface Filler RM 1.5kg. Ready mixed fine surface filler for interior use. Ideal for filling scratches, small holes and small chips upto 1mm deep. For use with plaster, plasterboard, particle board, primed wood, cement and old painted surfaces. Easy sanding, drys white in colour and allow 24 hours drying time.

Sets in 30 minutes. No thickness limitation. Very easy to rub down.

Toupret Humistop - Anti-Damp Treatment is a specialist water-based white coating, formulated using fillers and synthetic binder's for the treatment of damp interior walls before painting or wallpapering. Suitable for application to damp (but not dripping) interior substrates, including cement, concrete, brick, stone. Can be overcoated with any Toupret filler or any standard decorative coating system.

Toupret Touprelith F Masonry Repair Filler is a high quality specialist resin powder filler for the professional decorator and specifier. Once mixed with water, the obtained paste is light grey and fine. Suitable for filling holes, cracks and chipped or damaged angles and gaps on all rough exterior masonry substrates including cement, concrete, brick, stone and cellular concrete.

Note: It is necessary to remove all damaged substrate (concrete etc.) around the spall to a sound base. Mechanically grind and/or brush the reinforcement to remove all rust and scale. Substrates must be hard, cohesive, clean and sound. Do not use where temperatures are below 5°C or over 80% Hygrometry rate or in direct sunlight. Apply by brush in a thick coat. For the best mix, always pour the powder into the water until the correct consistency is achieved. Thick consistency: 35% of water (0.35 litre...

Toupret Elafib Moving Crack Filler is a ready mixed specialist resin and microfibre filler for the professional decorator and specifier. The ready mixed paste is white and fine. Suitable for the repair of moving cracks on walls, ceilings and most interior and exterior substrates including old painted surfaces, plaster, plasterboards, primed wood, concrete, cement, brick, masonry, stone, lime mortar and cellular concrete. Toupret Elafib Moving Crack Filler can be over painted with any flexible decorative...

Toupret Fibacryl Exterior Filler RM 1kg. Fibacryl is a fexible exterior filler for cracks which are liable to slight movement on surfaces such as concrete, cement, mortars, breeze block, brick, primed wood, plaster and old painted surfaces. Manual application with a filling knife in 5mm to 10mm coats, moving cracks on facades' cracks need to be less than 2mm wide. Fibacryl is ready mixed and high in fiber and is resin rich for a better cohesion, grip and high flexibility and will not allow either...

Use Toupret Fibarex on exterior substrates such as plaster, previously painted surfaces (excluding water-proofing coatings), cement, concrete, breeze blocks, brick, stone, glass and earthenware tiles. Use as a gap filler, filling holes and indentations, concrete bubbling, and as a skimcoat if required.

Toupret RedLite Ultra-Light Filler 4 Litre. RedLite is an ultra light weight and fast drying ready mixed paste filler. Extra white in colour, RedLite is suitable for interior use for filling fills dents, cracks and holes, in new or renovation, unpainted or old painted surfaces like cement, concrete, plaster, drywall, plaster tiles or primed wood and is fast drying and will not shrink, crack or flake. RedLite drys in 30 minutes and can be covered in with all types of finishing fillers, all paints...

Note: For the best mix, always pour the powder into the water until the correct consistency is achieved. Thick consistency: 50% of water (0.5 litre of water per kilo of powder). A second coat can be applied on wet filler as soon as the preceding one

Note: For the best mix, always pour the powder into the water until the correct consistency is achieved. Thick consistency: 50% of water (0.5 litre of water per kilo of powder). Mix 30 minutes before you intend to use. Prime the surfacer prior to overcoating with any water-based coatings. Working time: up to 48 hours.

Self-adhesive open weave glass-fibre scrim tape, for reinforcing joints and crack repairs made using Toupret fillers. This is basically a standard self-adhesive joint tape in a small sized roll at a rediculous price, you can purchase a top quality alternative trade sized 90 meter roll of Kip Joint Tape at less than half the price . Interior or Exterior use. Ideal for use with moving crack fillers such as Toupret Elafib and Toupret Fibacryl. Each roll is 50mm wide x 20 meters long.

Toupret Fibacryl Exterior Filler RM 5kg. Fibacryl is a fexible exterior filler for cracks which are liable to slight movement on surfaces such as concrete, cement, mortars, breeze block, brick, primed wood, plaster and old painted surfaces. Manual application with a filling knife in 5mm to 10mm coats, moving cracks on facades' cracks need to be less than 2mm wide. Fibacryl is ready mixed and high in fiber and is resin rich for a better cohesion, grip and high flexibility and will not allow either...

Toupret High Gloss Surfacer (Gras A Laquer) is an oil-based interior and exterior fine surface filler for producing super smooth glass like surfaces ready for over painting. It's similar to Sikkens Kodrin Spachtel, and is ideal for use where you want to produce a super smooth high gloss finish using a long-oil high gloss coating such as Sikkens Rubbol AZ.

For interior use on previously painted, or unpainted substrates such as plaster, plasterboard, cement, concrete, cellular concrete, wood etc. Will not shink, and there is no requirement to sand filled surfaces once dry. Replace the interior film after use, and before replacing lid. Overcoatable in as little as 30 minutes.

Only a single generous application is required, either by brush or roller. The product can also be sprayed. Coverage will vary considerably depending on the porosity / suction of the substrate, however average coverage is 5 square meters per litre. Ensure to use plenty of ventilation if used internally. Do not smoke. Wear safety goggles if applying to the ceiling.

Toupret Wall Hardener Stabiliser 1Lt. For interior or exterior use, hardens and stabilises soft friable or powdery plaster, mortar, brick, stone and powdery paints, apply with brush or roller, can be over coated 24 hours later.

Toupret Calcot Fin - Ultra Fine Elastic Scrim is a knitted polyamide scrim for interior and exterior application over small pre-filled cracks and joints. Suitable for the repair and reinforcement of inert and moving cracks and joints in ceilings and interior and exterior walls etc. when bedded into Toupret Elafib Moving Crack Filler. It's extremely fine, but incredibly strong filament is easily embedded, minimising the visibility of any repair.

For interior or exterior use over tiles, dry lining, cork, polystyrene, concrete and plastic coverings. Once dry, it should be immediately rubbed down, then overcoated with any standard interior or exterior decorative paint (excluding mineral paints). Coverage up to 350 grams per square meter per coat.