Trend TREPRT Router Table : 218 results priced between £5.00 and £500.00

Back fence squareness adjustment for absolute accuracy. T11 quick release fixing holes for T11 fixing kit. Bench leg level adjustment when mounted on a bench. 20mm hole for the T11 Quick Raiser adjuster handle. Floor or bench standing with removable legs and adjustment for uneven floors. Extruded 8mm thick aluminium alloy table top with minimal loss of cutter depth. Cutter aperture of 90mm allows the use of the largest router cutters available. Cast back fence with extruded adjustable alloy...

PRT Trend Professional Portable Router Table 230v a real professional portable router table with aluminium table surface and back fence for floor&bench mounting use fitted with back fence squareness adjustment for absolute accuracy&T11E quick release fixing holes for fixing the T11 fixing kit, complete with bench leg level adjustment when mounted on a bench and 20mm hole for the T11 Quick Raiser adjuster handle can be floor or bench standing with removeable legs with adjustment for uneven floors...

Large laminated MDF with high back fence. Removable 6.35mm thick aluminium insert plate with 98mm diameter aperture, pre drilled for Trend TBC routers and T11 routers. Quick Raiser and Quick Release facility. Full perimeter leg stand with adjustable feet. Lead on pin for bearing guided curved work. Mitre fence with zeroing and spelch block facility. No volt release switch. Router not included.

Professional portable router table with aluminium table surface and back fence for floor & bench mounting use. Back fence squareness adjustment for absolute accuracy. T11E quick release fixing holes for fixing T11 fixing kit. Bench leg level adjustment when mounted on a bench. 20mm hole for the T11 Quick Raiser adjuster handle.

It is packed with the necessary features to maximise the versatility of all popular portable routers.

* The Craftsman Router Table will suit craftsmen & woodworking enthusiasts. It is packed with the necessary features to maximise the versatility of all popular portable routers.

Trend Fixing Kit Router Tables Csk Screw (Jig Making Accessories / Router Table Accessories) Pack of countersink screws for fitting routers to homemade router tables. Dimensions: Assorted Countersink Screws. Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding VAT.

The CraftPro Router Table will suit craftsmen & woodworking enthusiasts. It is packed with the necessary features to maximise the versatility of all popular portable routers. The following are features of the CRT MK3:

The Craftsman Router Table will suit woodworking enthusiasts and those new to the craft of routing. It is packed with the necessary features to maximise the versatility of all popular portable routers. Extension surface extends the width of the table by over 400mm. Parallel adjustment system of backfence together with measurement strips. Rigid square insert rings. Aluminium surface has parallel ribs over full surface. Seperate fixing plate system beneath table (plate ordered separately).

Cast Iron Main Table. Cast Iron Cutter Hood. Hinged Top with Gas Filled Springs. Independently Adjustable Fences. 2 Hold Down Spring Clamps. Large Aluminium Sliding Table. Fence and Work Clamp for Tenons. 60mm Diameter Extraction Outlet. Floorstand With Shelf Included.

It is packed with the necessary features to maximise the versatility of all popular portable routers.

The Craftsman Router Table will suit craftsmen & woodworking enthusiasts. It is packed with the necessary features to maximise the versatility of all popular portable routers. Large laminated MDF table. Quick release aluminum back fence with sliding MDF cheeks. Aluminium insert plate pre drilled for Trend TBC routers and T11 Quick Raiser and Quick Release. High back fence. Full perimeter leg stand with adjustable feet. No volt release switch. Router not included. Rating=Craftsman. Table...

With built in Quick Raiser fine adjuster. Electronic full wave variable control of spindle speed under load for a fine finish on all types of material. Soft start eliminates sudden movement of machine on start up. Two column precision base with large phosphor bronze bushes for plunging accuracy. Spindle lock and hex collet nut results in easy cutter changes with the 22mm spanner supplied. Adjustable twin rod parallel side-fence guide with integral micro-adjuster for straight edge work. Precision...

A heavy duty portable router table with sliding table for bench or floor standing for use with professionals and tradesmen.Table has a cast back fence with extruded adjustable alloy checks and the out-feed fence has a planing attachment. The slid...

TREND T11EK QUICK RELEASE KIT FOR USE WITH ROUTER TABLE

The Craftsman Router Table will suit woodworking enthusiasts and those new to the craft of routing. It is packed with the necessary features to maximise the versatility of all popular portable routers. Extension surface extends the width of the table by over 400mm. Parallel adjustment system of backfence together with measurement strips. Rigid square insert rings. Aluminium surface has parallel ribs over full surface. Seperate fixing plate system beneath table (plate ordered separately).

For use as vertical or horizontal pressure guards, the polypropylene featherboard prevents the material from being thrown back by the cutter and holds the work down onto the table or against the back fence.

Designed for use on router tables and saw benches, this ABS and polypropylene push block allows far better control of the workpiece and helps to keep the operators fingers clear of the router cutter.

The line-up pin fit into the collet and is plunged through the router base. The line-up bush is fitted into the Unibase and secured. This is then placed over the line-up pin and rotated in order to line up the fixing holes. The Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes. These range from 10mm up to 30mm (GB10 - GB32). For larger diameter cutters a 40mm guide bush (GB40) is available.

A large rigid router table insert plate for incorporation into user-made router tables. Thermoset phenolic plastic router plate . Two concentric snap-in rings. Three hole size s of 98mm, 68mm & 32mm dia. Concentric rings and radial lines on underside for easy centring of router . Moulded with slight crown (0.8mm) for distortion free cuts. Corner clips to clamp to table underside. Can be mounted to 19mm tops with edge rebate of 6.35mm deep x 12.7mm wide.

For manufacturing Joiners, Shopfitters, Furniture Manufacturers, Builders and the enthusiast. For manufacturing Joiners, Shopfitters, Furniture Manufacturers, Builders and the enthusiast. The Saw Centre Group have the machines, the tooling and the tools to fulfill your needs. So whatever the nature and size of your operation, we can supply the equipment. We stock the widest range of products from C.N.C woodworking machinery, power and hand tools to tooling, blading, router cutters, abrasives and...

Trend Shop Power Tools and Safety T4 Light Duty Routers, Weight: 11.96 lbs., Manufacturer: Trend

To register your product, you will need to register as a user on the Trend website . On the account management page you can then register your power tool for the warranty extension and print out your warranty certificate. You will need to register each purchased tool separately. If you need to make a claim under the three-year warranty, you will need the Product Guarantee Certificate together with the original proof of date of purchase. Full T&C's here

A Large rigid router table insert plate for incorporation into user-made router tables. Supplied with two concentric rings and lead-on pin.

Trend Hose Adaptor 58mm To 39mm 257011 (Router Table Accessories / Dust Extraction) Hose adaptor (58mm OD) which fits directly into fence. Dimensions: 58mm OD - 39mm ID Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding VAT.

Replacement corner fixing kit for the RTI/PLATE.Please note that prices in the Trend Catalogue download if shown below may differ to the website prices as those listed in the Catalogue are Trend List Prices excluding VAT....

Trend Fixing Plate C - Crt/Mk2 (Router Table Accessories / Fixing Plates) A fixing plate to attach the router to the table for the following routers: MAKITA 3600B*, 3620, 3612(C), 3612BR *Re-drilling of insert plate required Dimensions: 6mm Steel mounting plate. Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding VAT.

Trend Hose 39mmod x 3M & Adapter 257010 (Router Table Accessories / Dust Extraction) Kink-free hose. Requires at least one CRT/3 hose adaptor (58mm OD) which fits directly into fence. Dimensions: 3 metre length 39mm OD - 32mm ID Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding VAT.

Trend Insert 32mm To 68mm Rti/Plate (Jig Making Accessories / Router Table Accessories) Replacement insert 32mm to 68mm for the RTI/PLATE. Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding VAT.

Trend Insert 68mm To 98mm Rti/Plate (Jig Making Accessories / Router Table Accessories) Replacement insert 68mm to 98mm for the RTI/PLATE. Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding VAT.

Trend PStick Plastic 1 Off 405mm Ol (Router Table Accessories / Pushstick) Trend P'Stick Plastic 1 Off 405mm Ol (Router Table Accessories / Pushstick) Safety pushstick for guiding small sections of timber over a router or saw table. Made from rigid plastic, this safety aid keeps operators hands away from the cutting tool. The pushstick has a 420mm overall length with a hanging hole for storage and easy accessibilty. Dimensions: Safety pushstick for guiding small sections of timber past the cutter...

Trend Router Table Insert Plate (Jig Making Accessories / Router Table Accessories) A large rigid router table insert plate for incorporation into user-made router tables. Supplied with two concentric rings and lead-on pin. Router plate is made of thermoset phenolic plastic and the concentric rings are glass-in reinforced polycarbonate. Concentric rings and rdial lines on underside for easy centring of router. Moulded with slight crown for distortion free cuts. Corner clips to clamp to table underside...

Trend Rti/Plate Eye & Face Shield (Jig Making Accessories / Router Table Accessories) For safety a clear polycarbonate guard that shields the eyes and face from wood chips when used in conjunction with the RTI/PLATE. Dimensions: Diameter 108mm Thickness 1/4 inch Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding VAT.