alpine subwoofer : 321 results priced between £50.00 and £500.00

Power: 3200W peak. Handling: 800W continuous. Impedance: 2 + 2 ohms. Frequency response: 28 ÷ 700 Hz. Sensitivity: 91 dB/SPL.

The website was easy to use but liked the fact they had a shop near by. Went to the Nottingham shop and brought a parrot for my work carried. The price was the cheapest and fitting was cheap. Great service.

Great everything. The products are what they say on the tin, the delivery is great and the customer service is nice too. I've shown all of my friends the companies site because I was very impressed.

Brought this in a Web Offer "Sale" from another "Deals" site - Not Car Audio Centre - when it arrived I was surprised and a little cautious to find that it was a Refurb unit - which would have been nice to know up-front - but then again it was cheap. However,..... It does what it says on the box. Simple installation - although a warning to Mercedes drivers - it is a bit of a tight squeeze for the centre consol Aux Power point but it does fit - with the draw open. Having said that - Plug in, Set a...

Max Watts: 2500. RMS Power: 1250. Cone: Carbon Fiber. Voice Coil 3.0" Quad 1 Ohm (plays at 1-ohm or 4-ohm). Surround 1" Tall Durax Foam. Magnet 200oz Flux Ferrite Y40. Terminals Push-In or Bannana Nickel Plated. Basket Aluminum Die-Cast. Tinsel Leads Woven Silver Plated. X-Max 60 peak to peak. SPL 96.4 dB. SOLD AS INDIVIDUAL UNITS.

Watts 400. RMS 200. Cone Poly Mica. Voice Coil 1.5" Dual 4 Ohm. Surround Dual Layer 1" Tall. Magnet 40oz Flux Ferrite Y40. Terminals Custom Tooled. Basket Stamped Steel. Tinsel Leads Cone Woven. X-Max 15 mm peak to peak. SPL 92.2 dB. SOLD AS INDIVIDUAL UNITS.

Max Watts: 1600. RMS Power: 800. Cone Finger "V" Ultra Light. Voice Coil 3.0" Dual 2 Ohm. Surround 1" Tall Santoprene. Magnet 180oz Flux Ferrite Y40. Terminals Push-In or Bannana Nickel Plated. Basket Aluminum Die-Cast. Tinsel Leads Woven Silver Plated. X-Max 40mm peak to peak. SPL 95.6 dB. SOLD AS INDIVIDUAL UNITS.

10" DVC dual 4-ohm subwoofer. Peak Power 900W. RMS Power 300W. Frequency Response: 30Hz – 1kHz. Kevlar Reinforced Pulp Cone. Aluminum Coated Poly Parabolic Dust. Extra Rigid Custom Steel frame with Integrated Leg Vent System. Dual Voice Coil Design, 4-Layer High Temp Wire on High-Strength Brass Former. FEA Optimized Motor Structure with CRC Geometry. Extended Dual Flare Vented Pole. FEA Optimized Mirrored Progressive Nomex® Spiders with Integrated Tinsel Leads. FEA Optimized High Excursion...

Are you looking for a sub that can not only get loud but sound great doing it as well? Then the Toxic CBL Series Subwoofer is just what your looking for. The CBL Series Subwoofers are designed for fast and clean response at high output levels. Optimized for use in small enclosures and build to give high-end sound at a realistic price. Toxic is and has always been dedicated to quality sound reproduction. The use of a one-piece injection molded cone and large rubber surround combined with oversized...

Are you looking for a sub that can not only get loud but sound great doing it as well? Than the Toxic CBL Series Subwoofer is just what your looking for. The CBL Series Subwoofers are designed for fast and clean response at high output levels. Optimized for use in small enclosures and build to give high-end sound at a realistic price. Toxic is and has always been dedicated to quality sound reproduction. The use of a one-piece injection molded cone and large rubber surround combined with oversized...

As the mission to create the ideal audio system continues, there comes a decision of which subwoofers bump the hardest, and which ones are designed for critical listening. Toxic makes this choice infinitely easier by offering a wide range of woofers for a variety of applications. The engineers at Toxic, consistently push the limits of woofer design and technology to create speakers that produce more bass with less distortion. They're challanged to intergrate flawless music reproduction with the unheard...

Quality. Performance. Affordability. It is seldom that a company meets these objectives with a single product. At Twister Audio they believe quality and performance are not just items on a wish list. They are fundamental requirements that should never be compromised. So Twister chose to make them affordable. - Introducing the new TW range. “There goal was to preserve the renowned quality and performance of a Twister product, then make it available to everyone. The new TW120Rd has achieved that goal...

10" subwoofer with dual 4-ohm voice coils. pulp/fiber cone reinforced with Kevlar and a layer of Rohacell® plastic film. Santoprene rubber surround. cast aluminum frame. power range: 500-1 000 watts RMS (500 watts per coil). peak power handling: 3 000 watts. frequency response: 26-200 Hz. sensitivity: 82 dB. top-mount depth: 8-5/8". sealed box volume: 0.5-1.0 cubic feet. ported box volume: 0.8-1.5 cubic feet.

V-POWER DIGITAL MONO. 700 Watts Max. Power. Adjustable Low Pass Filter, 50-200Hz @24dB/oct. Bass EQ RCA & Speaker Inputs. Dimensions: 233mm(W) x 60mm(H) x 242mm(D).

This was the first time I had used car audio center and I have to say I was very impressed. Very easy to navigate the website no awkward clicking and blindly wondering through looking for the right item. The product I ordered was a head unit which gave me all the specification I needed. Upon ordering I received an email confirming my order and explaining the delivery method and further correspondence. The next morning I had another email confirming the dispatch of the item with a tracking number...

Power: 8000W peak. Handling: 2000W continuous. Impedance: 1.2 + 1.2 ohms. Frequency response: 28 ÷ 700 Hz. Sensitivity: 98 dB/SPL. High thermal dissipation and magnetic permeability plates, provide constant, even flux. Large double magnet, for perfect control under high power, very high. excursion conditions for top SPL performance. Aluminium voice coil wound on four layer former, for unheard of thermal and mechanical capacity. Back plate vent holes, for optimal thermal dissipation. Back...

Power: 2400W peak. Handling: 600W continuous. Impedance: 2 + 2 ohms. Frequency response: 34 ÷ 800 Hz. Sensitivity: 90.5 dB/SPL.

12" DVC subwoofer. Frequency response: 18-250Hz. Power Handling, RMS: 350 Watts. Power Handling, Peak: 1400 Watts. Sensitivity: 92 dB. Mounting Depth: 5" (127mm). Impedance: 2-ohms DVC, can be wired into 1-ohms or 4-ohms.

Size: 15". Max Watts: 1600. RMS Power: 800. Cone Finger "V" Ultra Light. Voice Coil 3.0" Dual 2 Ohm. Surround 1" Tall Santoprene. Magnet 180oz Flux Ferrite Y40. Terminals Push-In or Bannana Nickel Plated. Basket Aluminum Die-Cast. Tinsel Leads Woven Silver Plated. X-Max 40mm peak to peak. SPL 98.3 dB. Image Shown is of the 12" Model. Sold As Individual Units.

Cerwin Vega Vmax15 15" 1000W Subwoofer Dual Voice Coil 4 OHMS

Acrylic window with blue illumination. 25 cm (10 inch) Type-G Subwoofer. Peak power: 500W. RMS Power: 150W. Dimensions: 350 x 360 x 285/395 mm.

10" Type-E FREE-AIR subwoofer. Ideal for mounting on a rear-shelf or baffle-board. Peak Power: 500W. RMS Power: 150W. Frequency Response: 38Hz - 1kHz. Sensitivity: 88.4dB/W (1m). Installation Diameter: 235mm. Depth: 131mm. Sold in single units.

12" Type-E FREE-AIR subwoofer. Ideal for mounting on a rear-shelf or baffle-board. Peak Power: 650W. RMS Power: 200W. Frequency Response: 35Hz - 1kHz. Sensitivity: 89.5dB/W (1m). Installation Diameter: 282mm. Depth: 152mm. SOLD AS INDIVIDUAL UNITS.

Overall Dimensions: 443mm(W) x 390mm(H) x 431mm / 324mm(D)

Features New Shallower Design 1-Piece Parabolic Cone New Cosmetic Dual Voice Coil Design Spring-loaded Push Terminals Concealed screw gasket Power Specifications 900 Watt Peak Power 300 Watt RMS Power Impedance: 4+4 Ohm Sensitivity 84dB/W (1m) Frequency response: 30Hz - 1kHz Mounting depth: 110 mm Cut-out diameter: 227 mm

4 x 50 W High Power Amplifier. 6.1" WVGA High Resolution Display. White LED Backlighting System. 50/50 Split Screen. Touch Control. My Favorites Function. Automatic Setting Change (2 Users). 5x Background Colour Display Settings (Blue/Red/AmberGreen/Black). High Grade Audiophile Design. 3x PreOuts (4V, Front, Rear & Subwoofer). 1x A/V AUX Output. 2x A/V AUX Inputs. Steering Wheel Remote Control Ready. OEM Sub-display Ready. Remote Control Ready. Navigation Guidance Mix. Camera Connection...

I brought the In Phase IPS720I so I could play songs from my iPhone in my car. The unit arrived next day, was the cheapest around and worked perfect.

Thanks for the help on helping me fit my speakers, most companies would not give the the time or day. _Phil

The MRX-M50 mono amp puts out up to 1,000 watts RMS to your subwoofer system, so you can fill your listening space with plenty of bass. And it'll operate safely with a 1-ohm load, making it useful in a variety of sub system installations. Onboard low-pass and subsonic filters let you get the best sound out of your setup, while a bass boost helps to fatten up the sound if you need it.

The MRX-M50 mono amp puts out up to 500 watts RMS to your subwoofer, so you can fill your listening space with plenty of bass. And it'll operate safely with a 1-ohm load, making it useful in a variety of sub system installations. Onboard low-pass and subsonic filters let you get the best sound out of your setup, while a bass boost helps to fatten up the sound if you need it.

4-gauge amp wiring kit with 80-amp fuse recommended - wiring and hardware not included with amplifier