bathroom ceiling fan heater : 167 results priced between £25.00 and £350.00

Details 4kW fan convector that is ideal for large, non-domestic areas. Smith's Skyline 4kW units install simply into a 600mm x 600mm ceiling tile Maximum installation height 3.2m (10'6") to underside Minimum 150mm void space required for recessed installation Two air inlet options: room only, room and void Not suitable for bathrooms and other high humidity areas Maximum flexibility in installation: only 600mm - side clearance required Facility for connection to 6mm threaded rod or chains (rods and...

2 Heat settings (2 or 4 bulbs). 4 long life 245 watt infrared heating bulbs. 60 watt center light bulb. Extractor with powerful quiet motor to effectively remove steam. Fascia finished in matt chrome. Classical and elegant. 180mm super thin body for easy fitting in ceilings. Input power only 1060W. CE & SAA approved.

2 Heat settings (2 or 4 bulbs). 4 long life 245 watt infrared heating bulbs. 60 watt center light bulb. Extractor with powerful quiet motor to effectively remove steam. Fascia finished in matt chrome. Classical and elegant. 180mm super thin body for easy fitting in ceilings. Input power only 1060W. CE & SAA approved.

Weight: 3.09 lbs., Manufacturer: Gdc Group Ltd

EN 60335-1 Electrical safety. EN 60335-2-30 Electrical safety. EN 61000-3-2 EMC emission. EN 61000-3-3 EMC emission. EN 50082-1 EMC emission. EN 50081-1 EMC emission.

Part No: HE7230RF Consort Claudgen 3kW 600×600 recessed ceiling fan heater, which is wireless controlled, and designed to fit into a 600×600 ceiling grid in a suspended ceiling. The main purpose of this type of heater is to provide heating in areas in shops and offices, where there is limited floor and wall space. Product specification as follows: 3kW Supplied with remote control for wireless operation Quiet operation Choice of 3 heat settings The actual heater box is sealed, to enable greater energy...

Installed fan heater with electronic runback timer designed for high level mounting. Provides rapid warm up for bathrooms, ensuites and kitchens. Pull cord Visual ON/OFF indicator Designed for high level mounting Adjustable runback timer from 5 -

The Aurora Altair 2000W Bathroom Fan Heater in white high-gloss plastic casing with metallic grille for wall mounting. With continuously adjustable room thermostat.

Part No: 00147AC The WH60 Space Heater is ideal for use in factories, warehouses, workshops, canteens; and is also perfect for use in public areas of shops, waiting rooms, offices, garages, hospitals, large stores and even agricultural applications. 6kW industrial fan heater Wall or ceiling mounting options available Heavy duty steel casing with die cast aluminium guards Spiral wound Nichrome wire element Metal wall bracket Multi directional positioning – 180 degrees swivel and 45 degrees vertical...

This neat and compact electric heater has a heating performance of 3.3 kW and is suitable for use in small rooms, workshops, garages and for market stalls. It has an adjustable heating performance and a built-in thermostat to monitor the temperature and make sure it remains constant.

Voltage: 240v. Wattage: 2000W. 2 Heat settings: 1kW Low, 2kW High. Overheat protection. Wall mountable, complete with fixing kit. IP rating: IP21. Pullcord operation - Cord 505mm Length. Power cable length 610mm (no plug).

Product simple to fit by qualified electrician. Used in main bathroom as supplement to heat available from towel rail in Spring, Summer and Autumn when main central heating not on. Product appearance is very neat with clean lines, and the outward slope built in to the heater ensures the downward heat is directed away from the wall and woodwork below. (fitted above the bathroom door.) Timer settings finicky to set, but work effectively, and extremely useful to ensure heater is not left on accidently...

Hyco Mistral Bathroom Fan Heater is a new 1.8kw fixed wall mounted fan heater designed to cope with humidity and offering a high degree of splash proof resistance. This Hyco bathroom heater is Ideal for installation in bathrooms and rooms that have humid environments.Product Code: MS180Features:Splash Proof IP24Double insulationMetal caseRemovable and washable dust air filterThermostatNeon indicator

1.8kW. Splash Proof IP24 rated. Double insulation. Metal case. Removable and washable dust air filter. Thermostat. Neon indicator. Product Code: MS180.

Slim-line fan heater maximum projection 109mm (4")Inbuilt wall mounting bracket and fixing kit suppliedIdeal for bathrooms, kitchens and ensuitePull cord on/off switch with pilot light indication Slim-line fan heater maximum projection 109mm (4")Inbuilt wall mounting bracket and fixing kit suppliedIdeal for bathrooms, kitchens and ensuitePull cord on/off switch with pilot light indicationPull cord length 500mmPre-set step down thermostat More | More

*. * 2 Heat settings: 1KW Low, 2KW High. * Overheat protection. * Splashproof to IP 21. * Pullcord operation – Cord 505mm Length. * Power cable length 610mm (no plug).

Upright fan heater with 3Kw heat output and 2 heat settings Adjustable room thermostat to set and automatically maintain the desired temperature Anti-frost function and summer ventilation Recommended for rooms up to 60m³ Ideal for bathroom use with IP21 Drip protection, Manufacturer: Delonghi

2 Heat settings (2 or 4 bulbs). 4 long life 245 watt infra-red heating bulbs. 60 watt centre light bulb. Extractor with powerful quiet motor to effectively remove steam. Stylish and elegant. 180mm super thin body for easy fitting in ceilings. Input power only 1060W. CE & SAA approved.

2 Heat settings (2 or 4 bulbs). 4 long life 245 watt infra-red heating bulbs. 60 watt center light bulb. Extractor with powerful quiet motor to effectively remove steam. Stylish and elegant. 180mm super thin body for easy fitting in ceilings. Input power only 1060W. CE & SAA approved.

2kWWall mounting, ideal for bathrooms. White. Pull cord on/off. Electronic delay timer (PP2375 only). Dimensions mm: 229(w) x 242(h) x 109(d).

Product Description Dimplex FX20VL 2.0KW Wall Mounted Fan Heater For Low Level Mounting With Adjustable Thermostat and No Pullcord. With their compact design, FX downflow fan heaters are the popular choice for heating bathrooms and ensuites as well as kitchens. Designed for low level mounting No pull cord 2kW maximum output Neon indicator Ask a Question Send to a Friend

White thermoplastic body.2kW max. output. This can be reduced to a lower level on installation.Mains indicator light.Safety thermal cut-out.Pull cord on/off switch.IP21 rated.There is no carriage charge on this product.More details

Searched Google...I ordered this as a replica replacement for the one I already had. These heaters are fantastic...really didn't think i could replace it with the same :) The Heater was delivered within a day...what can i say... the service was spot on. The communication was brilliant, cannot fault. Now that I know this this company exists I will most definately use them again. THANK YOU :)

Dimplex Bathroom Wall Mounted Electric Downflow Fan Heater - 2KW FX20EIPX4

Ideal for bathrooms, kitchens and areas requiring localised, controllable heat. Suitable for bathroom use in zone 3. Double insulated class II appliance. Thermostat included, set it to your desired temperature and the thermostat maintains it. Variable thermostat with frost protection setting. Pull-cord operation. Automatic safety cut-out. Power-on indicator. Fitted power supply cable. Secure wall fixing. Crisp White finish. Dimensions 190mm high x 305mm wide x 115mm deep.

2kW with TimerWall mounting, ideal for bathrooms. White. Pull cord on/off. Electronic delay timer (FX20VE only). Dimensions mm: 229(w) x 242(h) x 109(d).

FX20VE features Energy saving electronic timer automatically switches heater off after a preset time period to prevent it being left on accidentally. Time period adjustable between 5 and 155 minutes on installation. Heater can be manually switched off before time period expires. 2kW maximum output. 1kW output selectable on installation. Pull cord operation. Neon indicator.

Slim-line fan heater maximum projection 109mm (4")Inbuilt wall mounting bracket and fixing kit suppliedIdeal for bathrooms, kitchens and ensuitePull cord on/off switch with pilot light indication Slim-line fan heater maximum projection 109mm (4")Inbuilt wall mounting bracket and fixing kit suppliedIdeal for bathrooms, kitchens and ensuitePull cord on/off switch with pilot light indicationPull cord length 500mmPre-set step down thermostat More | More

Contemporary styling and superb air circulation for those smaller spaces in your home; perfect for kitchens and food preparation areas, bathrooms, walk-in closets, and hallways. Features: Finish/Blades/Glass Options: Brushed Steel, Silver Blades, Etched Opal Glass White Finish, White Blades, Etched Opal Glass Oil Rubbed Bronze, Oil Rubbed Bronze Blades, Tinted Opal Glass 14 degrees Blade Pitch 26" 3-Blades Flush Mount - Ideal for Low Ceilings Total Hanging Depth: 10-3/...

Ideal for bathrooms, kitchens and areas requiring localised, controllable heat. Suitable for bathroom use in zone 3. Double insulated class II appliance. Thermostat included, set it to your desired temperature and the thermostat maintains it. Variable thermostat with frost protection setting. Pull-cord operation. Automatic safety cut-out. Power-on indicator. Fitted power supply cable. Secure wall fixing. Crisp White finish. Dimensions 190mm high x 305mm wide x 115mm deep.

The SUN HEAT bathroom heater incorporates heat and light in a complete sealed unit. Designed to be ceiling mounted and unobtrusive, this bathroom heater is the perfect modern solution to warmth and light in your bathroom. With built-in Extractor Fan

Up to 2kW output bathroom fan heater. Suitable outside of bathroom zones 1 and 2. Ideal for small rooms such as bathrooms, en suites and kitchens. Quick to heat and simple to install. Safety thermal cut out. Mains indicator light. Slimline design. 1kW / 2kW power levels - set at installation. When heater is in 2kW mode the thermostat reduces the output to 1kW when the room is warm, then steps back up to 2kW wen required - thermostat set at installation. Pull cord on/off. Dimensions: 24...

Searched Google...I ordered this as a replica replacement for the one I already had. These heaters are fantastic...really didn't think i could replace it with the same :) The Heater was delivered within a day...what can i say... the service was spot on. The communication was brilliant, cannot fault. Now that I know this this company exists I will most definately use them again. THANK YOU :)

Suitable for bathroom use in zone 3. Thermostat included, set it to your desired temperature and the thermostat maintains it. Variable thermostat with frost protection setting. Pull-cord operation. Automatic safety cut-out. Power-on indicator. Fitted power supply cable (0.9m). Fixing/Securing bracket. Metal bodied. Crisp White finish. Dimensions 190mm high x 300mm wide x 115mm deep.

* Splash Proof IP24. * Double insulation. * Metal case. * Removable washable dust air filter. * Thermostat. * Neon indicator.