bathroom heater wall : 251 results priced between £25.00 and £200.00

The 400 watts Panel heater is for wall mounting only and should be connected to the mains supply via a fused spur. For this reason, it is not supplied fitted with a 13A mains plug for reasons of safety in the bathroom, If used outside the bathroom a standard 13amp plug can be fitted.

Featuring three heat settings and an adjustable tilt, this Honeywell 1.8kW Quartz bathroom heater must be mounted to a wall. It does not come with a plug and must be fitted by a qualified electrician. Should be fitted 180cm from the floor, 70 cm from the ceiling and 20 cm from the wall. White finish; Heat output 1.8kW; 3 heat settings; Power on indicator; Suitable for wall mounting; Size H17, W61, D11cm; Manufacturer's 3 year guarantee; EAN/MPN/UPC/ISBN: 4022167803016.

Approximate running cost: 20 pence an hour... (Based on a charge of 10p per kilowatt hour)... ... ... * Wall mountable halogen heater... * Indoor or Outdoor use... * Quartz Infra Red... * 3 Heat settings: 650W/1300W/2000W.. ...more

Weight: 3.09 lbs., Manufacturer: Gdc Group Ltd

2kWWall mounting, ideal for bathrooms. White. Pull cord on/off. Electronic delay timer (PP2375 only). Dimensions mm: 229(w) x 242(h) x 109(d).

2KW Downflow Electric Bathroom Heater Supplied with pull cord, this wall mounted heater is ideal for the Bathroom or Kitchen. One of our best sellers, this compact design heater is a popular practical choice. Up to 2000w output (2KW) - Switchable 1kw/2kw power. With adjustable thermostat. Supplied with pull switch. Mains indicator light. On/off switch. Thermoplastic body. White finish. Confirms to EN 60335, EN 50366 (LVD), EN 55014, EN 61000 (EMC). Suitable outside of bathroom zone 1 &amp...

1800W Quartz Halogen. Wall mounted. Powder coated metal body with elegant aluminium front. Variable tilt angle ensures optimum directional heating. Pull cord switch with 4 position indicator, 0=Off, 1=600W, 2=1200W, 3=1800W. 3 Year warranty. Dimensions: 600 x 108 x 164mm - Weight: 1.7kg.

This brand new model is slim and compact. Especially suitable for use in the bathroom. 400 Watt power. Wall mounted with built in thermostat. There is also a built in safety cut off system in the case of overheating. Wall-Mounted Bathroom Panel Heater Suitable for room size: 3-6 Square metres. Mechanical switch. Thermostat Frost protection IPX4. Safety cut off overheat protection. Suitable for humid area. Dimensions W x D x H: 350 mm. x 100 mm. x 290 mm. Weight Kg: 1.8 12 month warranty.

Dimplex FX20EIPX4 Dimplex Bathroom Heater With Timer Dimplex Wall Mounted Bathroom HeaterFX20EIPX4 features Innovative patented* design.  2kW maximum output.Timer Pull cord operation. Neon indicator. IPX4 rated Identical footprint to current FX20 models, meaning that retro-fitting an IPX4 model is incredibly simple. Energy saving thermostat switches output down to 1kW once the room is warm (functionc on 2kW setting only).1kW output selectable on installation. Dimplex now offers unrivalled versatility...

Details Payments can be taken over the phone. Please call 01302 300200 Levante 2kW wall mount bathroom heater 3 Heat Settings Pull Switch Safety Cut-off system 240V ~ 50Hz Warranty 1 year manufacturer's warranty.

Two upper keyhole slots are provided together with a third fixing hole to secure the heater to the wall. The heaters are supplied without cable.

Dimplex Mini XL6 Bathroom Storage HeaterDimplex Mini Storage Heater XL6 Willow white finish. Designed specifically for use in wet areas such as bathrooms. Suitable for use in confined areas, for background heating, or to supplement an existing system. Input loading of just 850W. Drip proof construction (IPX2 rated). Secure wall fixing for safety. Feet may be fitted under carpet or on top of suitable floor covering. Compatible with all off peak tariffs. Dimplex Mini XL & XLS Data Sheet.

Wall-Mounted Bathroom Panel HeaterSuitable for room size: 3-6 Square metersMechanical switch,Thermostat Wall-Mounted Bathroom Panel HeaterSuitable for room size: 3-6 Square metersMechanical switch,ThermostatFrost protectionIPX4Safety cut off overheat protectionSuitable for humid area More | More More Views

Approximate running cost: 20 pence an hour... (Based on a charge of 10p per kilowatt hour)... ... ... 2KW WALL MOUNTABLE PATIO HEATER... ... Introducing the brand new 2kw wall mountable patio heater.... With syle and wall ...more

BATHROOM PANEL HEATER Especially designed for holiday homes, compact and economical to run simply unfold the lugs from the back of the heater and fix to the wall with your fixings. COLOUR - White 150 Watt with towel rail Dimensions - 400 mm wide x 600 mm high x 25 mm Deep FREE UK MAINLAND DELIVERY

Twin lever pressure tested wall taps from Stiebel Eltron suitable for the kitchen basin or over the bath. Chrome metal handles, chrome body and chrome finish. Cold water connection is either via the instantaneous water heater or via a tap valve connection.

* Splash Proof IP24. * Double insulation. * Metal case. * Removable washable dust air filter. * Thermostat. * Neon indicator.

* Frost protection/holiday setting. * Splash-proof (IPX4 rated) for use in bathrooms and wet areas. * Lockable dust cover to protect controls. * Stylish one piece front panel with forward facing grille for better heat circulation. * Model No.EVS050. * Performance Input rating 0.50kW. * Installed Weight 3.4kg. * Height: 220mm. * Width (A): 580mm. * Depth: 107mm.

Manufactured in Germany, very reliable and robust Suitable for bathrooms, bedrooms, whole house heating Variable temperature settings from 5 to 30C (8 settings) Extremely flat design, in a pure white finish Very quiet and draught-free Heavy duty fixing brackets Splash proof to IP24 Low cost frost protection setting

The Aurora Altair 2000W Bathroom Fan Heater in white high-gloss plastic casing with metallic grille for wall mounting. With continuously adjustable room thermostat.

Voltage: 240v. Wattage: 2000W. 2 Heat settings: 1kW Low, 2kW High. Overheat protection. Wall mountable, complete with fixing kit. IP rating: IP21. Pullcord operation - Cord 505mm Length. Power cable length 610mm (no plug).

Find out more about Slimline Flat Panel Wall Heater 2000 watts This slim-line flat panel heater with thermostatic control, very quiet and draught-free in operation, extremely flat in design, pure white finish. When fitting this heater to the wall the top must have a minimum clearance of 150mm (6”) the sides and bottom should have a minimum clearance of 50mm (2”). This panel heater is suitable for whole house heating, excluding bathrooms! Slim-line panel heater, extremely flat in design in a pure...

Quick Overview DXIRX1200- 1200 Watt Infra Red Wall Heater High level mounting providing instant beamed heat for kitchens, bathrooms and areas requiring localised heat. Adjustable reflector finished in polished aluminium. Safe pull cord switching with on / off indicator. Silver finish. Length: 750mm. Height: 91.5mm. Depth: 75mm. Weight: 2.0kg.

Hyco Mistral Bathroom Fan Heater is a new 1.8kw fixed wall mounted fan heater designed to cope with humidity and offering a high degree of splash proof resistance. This Hyco bathroom heater is Ideal for installation in bathrooms and rooms that have humid environments.Product Code: MS180Features:Splash Proof IP24Double insulationMetal caseRemovable and washable dust air filterThermostatNeon indicator

Description Take the chill off the air in your conservatory or outhouses without spending a fortune. This space-saving tubular heater is energy-saving, too, at just 80W. It comes complete with brackets for mounting on wall or floor. Also ideal for boats and caravans, or for bathrooms if wired into the mains. High quality steel constructionLow power consumptionOverheat safety cut-outIP44 water resistanceMeasures 2' (60cm) long2" (5.5cm) dia. with 3' (0.9m) cable80W

Dimplex Infra-Red Heaters - Kitchen & Bathroom Wall Mounted Heaters Available in 500W, 1200W and 2000W finished in Silver Grey Designed to provide rapid beamed warmth 3 models with outputs of 500W, 1.2kW and 2.0kW IRX200N has choice of 3 heat settings Pull cord operation for bathroom use Adjustable beam angle to direct heat where it's needed Wall mounting brackets included IP24 Rated NOW AVAILABLE FOR NEXT DAY DELIVERY! Low Price. Buy Online Today! Not what you are looking for? Try our...

High level mounting providing instant beamed heat for kitchens, bathrooms and areas requiring localised heat. Adjustable reflector finished in polished aluminium. Safe pull cord switching with on / off indicator. Silver finish Length: 750mm Height

Description Take the chill off the air in your conservatory or outhouses without spending a fortune. This space-saving tubular heater is energy-saving, too, at just 135W. It comes complete with brackets for mounting on wall or floor. Also ideal for boats and caravans, or for bathrooms if wired into the mains. High quality steel constructionLow power consumptionOverheat safety cut-outIP44 water resistanceMeasures 3' (91.5cm) long – 135W2" (5.5cm) dia. with 3' (0.9m) cable

The PLX range has been styled to complement the popular XL style storage heaters and DuoHeat radiators, PLX panel heaters are often used to heat areas such as bedrooms, bathrooms, kitchens and other areas, which only require heating for short periods of the day.

Slim-line fan heater maximum projection 109mm (4")Inbuilt wall mounting bracket and fixing kit suppliedIdeal for bathrooms, kitchens and ensuitePull cord on/off switch with pilot light indication Slim-line fan heater maximum projection 109mm (4")Inbuilt wall mounting bracket and fixing kit suppliedIdeal for bathrooms, kitchens and ensuitePull cord on/off switch with pilot light indicationPull cord length 500mmPre-set step down thermostat More | More

Dimplex Bathroom Wall Mounted Electric Downflow Fan Heater - 2KW FX20IPX4

White thermoplastic body.2kW max. output. This can be reduced to a lower level on installation.Mains indicator light.Safety thermal cut-out.Pull cord on/off switch.IP21 rated.There is no carriage charge on this product.More details

Product Description Dimplex FX20VL 2.0KW Wall Mounted Fan Heater For Low Level Mounting With Adjustable Thermostat and No Pullcord. With their compact design, FX downflow fan heaters are the popular choice for heating bathrooms and ensuites as well as kitchens. Designed for low level mounting No pull cord 2kW maximum output Neon indicator Ask a Question Send to a Friend

Description Take the chill off the air in your conservatory or outhouses without spending a fortune. This space-saving tubular heater is energy-saving, too, at just 45W. It comes complete with brackets for mounting on wall or floor. Also ideal for boats and caravans, or for bathrooms if wired into the mains. High quality steel constructionLow power consumptionOverheat safety cut-outIP44 water resistanceMeasures 1' (30.5cm) long2" (5.5cm) dia. with 3' (0.9m) cable45W

Manufactured in Germany, very reliable and robust Suitable for bathrooms, bedrooms, whole house heating Variable temperature settings from 5 to 30C (8 settings) Extremely flat design, in a pure white finish Very quiet and draught-free Heavy duty fixing brackets Splash proof to IP24 Low cost frost protection setting