belt disc sander : 95 results priced between £5.00 and £350.00

Weight: 46.23 lbs., Manufacturer: Draper

The belt sanding option can be adjusted vertically through 90 degrees and the sanding table can be mounted for both belt and disc sanding operations.

750 Watts (1.0hp) 230V induction motor. 6" x 48" belt tilts & locks at any angle from 0 to 90°. Spring adjuster to regulate belt tension. 9" (230mm) sanding disc. Supplied with 190mm x 317mm sanding table that is adjustable between 0 & 45°. Can be used with either sanding belt or disc. Complete with finger guard on belt, full disc guarding & mitre fence on sanding table. Replacement sanding belts & discs available (fine, medium & coarse - 60, 80, 120 grit).

This belt and disc sander offers complete flexibility in the home workshop. The mitre gauge tilting arm and unique upper table offer a wide variety of sanding operations from chamfers to compound mitres. The robust cast iron construction provides good stability and minimises vibration. Capabilities include horizontal and vertical sanding of various materials such as wood plastic and aluminium. Fitted with a dust extraction outlet and a BS approved non-rewireable 3 pin moulded plug and cable. Display...

This compact yet versatile belt and disc sander is capable of serious work. The build quality and ease of use put this machine head and shoulders above the competition. The BDS150 makes an invaluable addition to any workshop.

The Charnwood W408 6" Belt and Disc Sander Description Powerful disc and belt sander for all home workshops. This new superior model has a bigger motor than any of its predecessors. Quiet Induction Motor 375w 6'' Diameter Sanding Disc 4'' x 36'' Sanding belt Belt can be used Horizontally or Vertically Work Table Secured at Both Sides 50mm Dust Extraction Outlet The motor is housed inside the base, well away from any dust, and a strong V-belt is used to drive the sanding belt and disc. Having the...

750 Watts (1.0hp) 230v induction motor. 6" x 48" belt tilts & locks at any angle from 0 to 90°. Spring adjuster to regulate belt tension. 9" (230mm) sanding disc. Supplied with 190mm x 317mm sanding table that is adjustable between 0 & 45°. Can be used with either sanding belt or disc. Complete with finger guard on belt, full disc guarding & mitre fence on sanding table. Replacement sanding belts & discs available (fine, medium & coarse - 60, 80, 120 grit).

Fitted with heavy-duty induction motor. Sanding disc table tilts up to 45° and is supplied with mitre gauge for accurate angle sanding. Belt can be used horizontally, vertically or any angle in between. Supplied with floor stand. Belt Size: 1220 x 152mm Belt Speed: 330mtr/min Disc Ø: 230mm Disc Speed: 1400rpm Table Size: 305 x 159mm Table Tilt: 0-45º Motor: 550W - 230V Overall Dimensions (H x W x L): 995 x 455 x 715mm Weight: 55kg Replacement Sanding Belts: Model No: Grade: ...

300 Watt, 230V motor. 1" x 30" sanding belt operates at 13.5 metres/sec. Tilts and locks at any angle 0 - 45º. 5" dia. circular sanding disc runs at 2,800rpm. Workpiece table dimensions - belt 127x127mm, disc 89x178mm (tilts & locks from 0° to 45°). 45mm O/D dust extraction port. Supplied with an adjustable mitre gauge and fitted with medium grit abrasive belt & disc. Dimensions (LWH) 360x280x360mm.

The mitre gauge, tilting arm and unique upper table offer a wide variety of sanding operations from chamfers to compound mitres.

Quick Overview A compact belt and disc sander, featuring a 150mm disc and a 100mm wide belt. Combining the two most popular types of fixed sander. A tilting table is provided for bevels and mitres along with an adjustable belt sander for horizontal or vertical use. This sander also features an easy to track belt system.

This heavy duty belt and disc sander has plenty of power to handle demanding sanding whilst also being capable of fine and delicate work. The solid cast iron table provides ample support and the 1 hp motor provides plenty of power to avoid stalling under pressure. Shown with optional leg stand.

Quality belt and disc bench sander, the BS-130. This electric belt sander is a very useful tool for woodworkers involved with small scale, intricate work.

370 Watts, 230V motor. 4” x 36” (100 x 914mm) belt tilts & locks at any angle from 0 to 90°. Belt runs at 450 m/min. 6” (150mm) diameter disc rotates at 2850 rpm. Supplied with removable sanding table (225 x 160mm) for use with either sanding belt or disc. Robust cast iron construction for rigidity & long life. Safety features include finger guard on belt, full disc guarding & locking on/off switch. Dims (LWH): 447 x 363 x 255mm. Weight: 18.65kg.

1" Belt & 5" Disc Sander Compact, robust and powered by a quiet running 188W induction motor, the versatile F31-085 belt and disc sander is an ideal addition to any workshop for both the trade user and home craftsman. Features include automatic belt tensioning and manual tracking for true belt running, two ground cast iron tables which can be tilted through to 45° (disc) and 60° (belt), and set at in-between angles, and a sliding mitre fence. For particular intricate or curved work, the belt backplate...

4" Belt & 6" Disc Sander The F31-462 is a very well built sander that's able to cope with heavy use. With a range of highly versatile features imcluding a quick belt release, a pivoting belt head that rotates into the vertical to facilitate the use of a multifunctional cast table and mitre fence, and an integral dust extraction port this is a valuable necessity for any serious woodworker/tradesman. Weighing 22kg, this machine offers high levels of stability, with minimum vibration. TECHNICAL...

This belt and disc sander offers complete flexibility in the home workshop. The mitre gauge, tilting arm and unique upper table offer a wide variety of sanding operations from chamfers to compound mitres. The robust cast iron construction provides good stability and minimises vibration. Capabilities include horizontal and vertical sanding of various materials such as wood, plastic and aluminium. Fitted with a dust extraction outlet, cable and approved plug. Display carton.

Quick Overview A compact belt and disc sander with self-adhesive discs for simple and easy changing. The table is solid cast iron with a finely ground finish and can be tilted to produce bevels and is fitted with mitre slot and fence. Sanding can be achieved on the upper surface of the belt against the supporting fence whilst horizontal or it can be raised to an upright vertical position and worked from a side fence. The drum at the front can be used for sanding or creating shapes. Specifications...

Quick Overview This belt and disc sander offers complete flexibility in the workshop. The mitre gauge, tilting arm and unique upper table offer a wide varirty of sanding operations from chamfers to compound mitres. The robust cast iron construction provides good stability and minimises vibration. Capabilities include horizontal and vertical sanding of various materials such as wood, plastic, and aluminium. Fitted with a dust extraction outlet, lockable on/off switch and a BS approved non-rewireable...

This floor-standing unit comes complete with a stand and is ideal for professionals and enthusiastic DIY users alike. Suitable for use in the larger workshop, it allows all manner of sanding tasks to be accomplished easily and quickly. In addition, a wide variety of sanding discs and belts are available

Sanding machines Here at homewood Woodworking machinery Ltd we sell Sanding and Linishing machines throughout the UK and sussex. The different types of sanding machines we can provide are Bench or Floor standing belt sanders, disk sanders, drum sanders, bobbin sanders, belt and disc sanders and linisher sanders (linishers).

Weight: 44.09 lbs., Manufacturer: Record Power

Motor 400watt. Belt size 100 x 915mm. Belt speed 491m/min. Disc size 152mm. Table size 160 x 225mm. Weight 20kg.

Belt Size 152x1219mm. Disc Size: 254mm. Disc speed: 1400 rpm. Belt speed: 517 metres per min. Table size: 355 x 200mm. Table tilt: 0 - 45 deg. Motor: 1hp. Weight: 47kg. Dimensions HxWxD: 360x640x530mm.

Cog Drive Belt for Clarke CS4-6D Belt and Disc Sander

This floor-standing unit comes complete with a stand and is ideal for professionals and enthusiastic DIY users alike. Suitable for use in the larger workshop, it allows all manner of sanding tasks to be accomplished easily and quickly. In addition, a wide variety of sanding discs and belts are available

The Phillipson DB166 has been designed and engineered for multi-purpose sanding of flat and curved shapes and meets all safety, reliability and accuracy requirements of industry today. For fast and accurate sanding of flat and convex surfaces, featuring a swivelling cast aluminium disc guard with two aerodynamically designed extraction outlets which significantly reduce dust emissions. The heavy duty two 16" diameter disc is machined from heat treated aluminium to a tolerance of 0.08mm to eliminate...

Quiet Induction Motor 375w. 6'' Diameter Sanding Disc. 4'' x 36'' Sanding belt. Belt can be used Horizontally or Vertically. Work Table Secured at Both Sides. 50mm Dust Extraction Outlet.

Description * Fitted with heavy-duty induction motor. * Sanding disc table tilts up to 45° and is supplied with mitre gauge for accurate angle sanding. * Belt can be used horizontally, vertically or any angle in between. * Supplied with floor stand.

{Summary} A powerful belt sander which can be used to prep shafts, finish ferrules (requires cloth belt) and remove sharp edges from steel shafts. Comes with 45mm extraction outlets for a dust free working environment. When finishing ferrules, its best used without the table

Bench mounting semi-portable belt and disc sander suitable for general woodworking applications. Powerful induction motor with smooth bearing-mounted drive pulleys gives quiet operation. Sanding disc table tilts to 45

Extremely versatile, with the worktable tilting from -45° to +45° and the possibility to equip the machine with other operating devices like the belt sanding unit and the pneumatic roller for sanding internal and external shapes and holes. It is possible to connect the sanding units to an exhaust system in an independent way, to maintain the working environment clean and healthy.