beta microphones : 190 results priced between £100.00 and £450.00

he Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain before feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. The Beta 58 A has a shaped frequency response that is ideal for close–up vocals. The superb performance of this microphone is not affected by rough handling...

Flat Frequency response and low self noise for natural reproduction. Supercardioid polar pattern for high gain-before-feedback and minimizes bleed from off axis sound sources. Tailored for superior transient response. Low mass, externally-biased, ultra-thin 24 karat gold-layered Mylar diaphragm. 3 position switchable low-frequency filter. -15dB switchable attenuator. Internal pop filter with three separate mesh layers.

Shure Beta 58 Microphone Product Code: MIC575 RRP £195.30 Our Price £149.95 Brand: Shure In Stock The Beta 58A dynamic vocal microphone is precision-engineered for live performance and project studio recording. A tailored frequency response accentuates vocals, and the supercardioid pattern isolates from other sound sources. Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect Uniform supercardioid pattern for high gain before feedback...

Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect. Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound. Neodymium magnet for high signal–to–noise output. Hardened steel mesh grille that resists wear and abuse. Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration. Minimally effected by varying load impedance. Legendary Shure quality and reliability...

Handheld UHF Radio Mic System, includes a PGX2/BETA58 transmitter fitted with Shure BETA58 capsule

Transducer Type: Condenser. Polar Pattern: Halfcardioid. Frequency Response: 20 Hz - 20 kHz. Sensitivity (1 kHz): 48,5 dBV/Pa / 3,8 mV/Pa. Equivalent Selfnoise: 25,5 dB(A). Sound Pressure: 155 dB. Weight: 470 g.

High output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments.

The SHURE BETA57A is a high output supercardioid dynamic microphone designed

Shure now offers the flawless redesign of the legendary SM58 that is rapidly becoming the new standard of excellence for demanding live vocals

The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. Supplied in a retail box with free K&M boom microphone stand.

THE T.BONE MB 85 Beta Universal Dynamic Microphone, cardoid, 50Hz-17 khz frequency range, without switch and clamp, ideal for vocals, drums, guitars.

Shure Beta 27, large diaphragm condenser microphone, supercardioid, 20 - 20.000 Hz, 154 dB SPL max (with switched pad), 3-step switchable highpass, switchable 15 dB Pad, weight 428g, incl. standadapter A32M and bag, especially for guitar, Overhead and Piano, and also for brass and vocals especially for stage application but also for studio

Replacement cable for Shure Beta 91, Beta 98S, Beta 98D/S microphones.

Quick Overview Smooth, wide frequency response with slight presence rise Uniform cardioid polar pattern for maximum isolation Minimal off-axis tone coloration Low-frequency roll-off compensates for proximity effect Three-stage pop filter minimizes breath pop and noise Break-resistant stand adapter Frequency response: 50 to 20,000 Hz

Quick Overview Uniform half-cardioid polar pattern for maximum gain-before-feedback and rejection of off-axis sound Precision-engineered low-profile design features integrated preamplifier and XLR connector to maximize setup efficiency while minimizing stage clutter Frequency response tailored for kick drum/low frequency applications with a wide dynamic range for use in high SPL environments Two-position contour switch to maximize attack and clarity depending on application – select the flat response...

Quick Overview Comfortable, latex-free earforms that hide behind the ears Cable length: 150 cm Thin, non-reflective wireframe that is easily hidden underneath hair Ultra-thin detachable microphone boom mount for right or left positioning Interchangeable frequency response caps (mild or high, two pieces each) Two foam windscreens included Clothing clip for securing cable Corrosion resistant Easy to clean Durable carrying case for protective storage Includes In-Line Preamplifier

Shure SLX / Beta 87A Set / Q24 containing SHURE SLX 2 / BETA 87A / Q24 (order code 269556), SHURE SLX 4 / Q24 (order code 269552) Microphones / Wireless Microphones / In-Ear / IR

Hypercardioid Snare mic Dynamic. Click logo for info.

Shure Beta 56A Product Description The Shure Beta 56A is a dynamic instrument microphone housing a super cardioid polar pattern featuring a built in microphone thread adaptor and XLR connection. The twist lock mechanism requires very little effort to capture audio from awkward positions such as snare drum or rack tom. The Beta 56a is also great for brass and woodwind instruments requiring minimal EQ to get the instrument sounding how it should – just point the microphone towards the instruments...

Type: Dynamic (moving coil). Frequency Response: 50 to 16,000 Hz. Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency. Output Level (at 1,000 Hz): Open Circuit Voltage -51 dBV/Pa* (2.8 mV) *1 Pa = 94 dB SPL. Impedance: Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z. Phasing: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3. Connector: Three-pin professional...

Shure Beta 98 H/C, condenser clip-microphone with gooseneck, cardoid pattern, 20Hz - 20kHz, spec. for wind- and percussioninstruments, fixed XLR phantomadapter, length of cable: 3 Meter

The Beta 52A is a high output dynamic microphone with frequency response tailored for use with kick drums and other bass instruments. A supercardioid pick up pattern ensures high gain before feedback and rejection of unwanted sounds, while a built-in dynamic locking stand adapter with integral XLR connector simplifies installation, particularly inside a bass drum. A hardened steel mesh grille protects the Beta 52A from the abuse and wear associated with touring.

Tailored frequency response for studio quality performance. Wide dynamic range for use in high SPL environments. Uniform supercardioid pattern for high gain before feedback and superior rejection of off-axis sound. Optional A98D drum mount is unobtrusive and versatile, allowing precise positioning of the microphone while holding it firmly in place. Compact design reduces stage clutter. Detachable cable for easy storage. Interchangeable microphone cartridges with different polar patterns are...

the t.bone MB 78 Beta, cardiod condenser microphone - ideal for vocals and acoustic guitars. Low-cut filter. Frequency range: 50Hz-16khz, without switch, Impedance: 200 ohms, max SPL: 136 dB, requires 9-52v Phantom Power, incl. mount and transport case, weight 240 g Microphones / Condenser Microphones

The WBH54 (wireless version of the Beta 54) is a subminiature, electret condenser head worn microphone. It provides uncompromised sound quality and reliability with minimal visibility in applications such as broadcast, theater, and touring. Despite their small size, the condenser element delivers full, clear, and natural reproduction of speech and vocals. The microphone features a durable, low-profile wire frame headband which is fully adjustable for stability and comfort. A plastic carrying case...

The Beta 52A features a modified supercardioid pattern throughout its frequency range to insure high gain before feedback and excellent rejection of unwanted sound. A built-in dynamic locking stand adapter with an integral XLR connector simplifies installation, particularly if the microphone is to be placed inside a kick drum. The stand adapter keeps the microphone position fixed and resists slipping, even when subjected to sharp blows and strong vibrations. A hardened steel mesh grille protects...

Shure Beta 98 D/S, condenser Miniatur-Microphone especially for Snare and Toms, Supercardioid, 20 - 20.000 Hz, 160 dB SPL max @ 2,5KOhm, incl. Rim-Clamp A98D, microphone bag, RPM626 Preamp, TQG-Cable (460 cm) C98 and winscreen, optional cardioid capsule (RPM108)

Material: 4mm Black Anti Scratch Finish. Hinged lid. Internal Dims: w445mm x d320mm x h130mm. External Dims: w460mm x d340mm x h150mm. Egg box foam in lid. Removable Pick and Pluck pluck foam in base. x2 Surface mounted catches. Lockable with keys. x1 strong black carrying handle. Weight: 2.5 kilos.

Type: Dynamic, moving coil. Freq. response: 50 to 16,000 Hz. Polar Pattern: Cardioid. Sensitivity (1000 Hz): 2,6 mV/Pa* (*1 Pa = 94 dB SPL). Max. SPL: 137 dB. Impedance: 600 Ohm. Power supply: none. Connector: 3p. XLR (male-type). Supplied with 6 m balanced cable with XLR plug. Dimensions: Ø 42 mm x L 160 mm. Weight: 0,271 kg. Sale Price £39.56 plus Vat.

Type: Dynamic (moving coil). Frequency Response: 50 to 16,000 Hz NOTE: The curve below shows on­axis response at a distance of 2 feet from a uniform sound source. Your response may vary, depending on microphone position. Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency. Output Level (at 1,000 Hz): Open Circuit Voltage -51 dBV/Pa (2.8 mV) (1 Pa = 94 dB SPL). Impedance: Rated impedance is 150 ohms (290 ohms actual) for connection to microphone...

Shure Beta 58 Triple Bundle containing: 3 pc. SHURE BETA 58 A (order code 105763), 3 pc. K&M 210/2 BLACK (order code 104941), 3 pc. PRO SNAKE TPM 10 (order code 213367) Microphones / Microphone Sets

The Beta 56A is dynamic microphone with integral locking stand adapter and XLR. Its uniform supercardioid pickup pattern provides high gain-before-feedback and excellent rejection of unwanted noise, while a tailored frequency response is optimised for use on drums and percussion, and also other high SPL sources such as backline amplification and brass. A neodymium magnet delivers high signal to noise ratio output and a pneumatic shock mount system minimises transmission of mechanical noise and vibration...