car amplifier circuit : 433 results priced between £25.00 and £400.00

Four channel amplification - gold plated rca low level inputs - automotive type fuse protection 4x75 wattstotal output @ 4 ohms - s/n ratio: greater than 85db - dimensions: 9.00''w x 2.25''h x 10.66''d Variable gain control/remote turn on/off - frequency response: 15-30k hz 4 ohm speaker impedance - overload/thermal/short circuit protection Built-in bass and treble control - power on led indicator

4 x 250 watts rms at 4 ohms - bass boost circuit - soft turn on/off - advanced protection circuitry - frequency response: 10hz- 40khz 4 x 500 watts max at 4 ohms - variable phase shift control - low level inputs - bass boost remote control - dimensions: 10.16''w x 2.56''h x 12.8''l 2 x 1000 watts max at 4 ohms bridged - 2 ohms stereo stable - rca line input and output - t.h.d: 95db Electronic crossover network - tri-mode configurable - power protection led indicators - channel separation...

2 x 100w RMS @ 4 Ohms. 2 or 1 Channel Operation. Class-AB Circuit. PWM Regulated MOS-FET Power Supply. MOS-FET Output Stage. Frequency Response: 5 - 50kHz (0, -3dB). THD: less than 0.04% at 1kHz. S/N: more than 80dBA at 2Vrms. LPF (50-400Hz, -12dB/oct). HPF (50-400Hz, -12dB/oct).

*Illuminated Logo Badge. *RCA inputs / outputs. *Large-sized terminals. *3-way protection circuit. *hairline-brushed aluminum heat sink. *Chromed Endpanels. *Bass Remote Wired Remote Control. *Bandpass switchable function. *High-pass filter 10-1200 Hz. *LPF 30-150 Hz. *Bass Boost 0 -12 dB. *Crossover Selector. *Twin Sub function (only 4CH). *Input selector (only 4CH). *2 x 100/200 Watts RMS into 4 / 2 Ohm. *2 x 200/400 Watts max. at 4 / 2 Ohm. *1 x 800 watts max. bridged. *255 x...

Maximum Power Output: 1800W. Rated Power Output (14.4V): 500W X 1 At 4ohms (20-20khz,0.5%THD) 900W X 1 At 2ohms (100hz,0.8%THD) Over 900W At 1 ohm. Class D Amplifier Circuit. Dual Mono Driive Ready. Aluminium Die Cast Heat Sink. Power MOS-FET Switching Power Supply. Built In Variable Low Pass Filter 50-200Hz (-24dB/oct). Built In Infrasonic Filter 15/25Hz (-18dB/oct). Bass Boost 40Hz (0-/+18dB). 1ohm Load Capability. Line Out Put Terminals (RCA). Gold Plated Power And Speaker Terminal...

State of the art circuit design, coupled with ultra efficient thermal transfer ensure the best current delivery possible from an amplifier series that delivers in power, style, installation and use.

Amplifier Type: Class-D (Digital). Channel Design: 1 Channel (Mono). Thermal Protection. Low-battery Protection. Power Supply: Resonant Mode Power Supply. Power Supply Design: DC-DC PWM Power Supply. Board Circuitry: STAR Circuit. Current Protection: Auto Over-Current Protection. Power Indicator: Top Mounted Blue LED Power/Status Indicator. RCA Output: Non-Fading Pre-Amp Output. Crossover: Adjustable High Pass, Low Pass. Pre-Amp Stage: Discrete. Final Outputs: MOSFET. Board Design: ...

Orion Car Audio Amplifier. RMS Power Rating:. 4 ohms: 250 watts x 1 chan. 2 ohms: 500 watts x 1 chan. 1 ohm: 1000 watts x 1 chan. Max power output: 2000 watts x 1 chan. Classic Orion industrial design. MOSFET power supply. Wired remote bass level control included. Tuned Bass EQ (0-18 dB bass boost at 45 Hz). IntelliQ Bass optimization circuit. Single channel monoblock operation. 1 Pair of preamp RCA outputs. Master/Copy switch for slave and master control. Heavy duty aluminum alloy...

Amplifier Type: Class-D (Digital). Channel Design: 1 Channel (Mono). Thermal Protection. Low-battery Protection. Power Supply: Resonant Mode Power Supply. Power Supply Design: DC-DC PWM Power Supply. Board Circuitry: STAR Circuit. Current Protection: Auto Over-Current Protection. Power Indicator: Top Mounted Blue LED Power/Status Indicator. RCA Output: Non-Fading Pre-Amp Output. Crossover: Adjustable Low Pass. Pre-Amp Stage: Discrete. Final Outputs: MOSFET. Board Design: 6-Layer Glass...

Crystal clear highs and mids and earth shattering bass are achieved by incorporating state of the art “D Class” circuit design and PCB topography.

*Max Power Output 400 Watts. *Continuous Power Output 2 X 65 Watts@4 Ohms, 2 X 90 Watts@2 Ohms, 1 X 150 Watts @ 4 Ohms bridged. *2 or 1-channel operation. *Class AB circuit. *MOS-FET Power Supply. *MOS-FET Output Stage. *Frequency Response 5 - 50,000Hz (0,-0.3dB). *S/N 76dBA. *THD: Less than 0.04% @ 4 Ohms, 1KHz. *HPF 150Hz @ 12dB/Octave. *LPF 80Hz @ 12dB/Octave. *Variable RCA input control (0.3 - 6V). *Variable Speaker input control (1.2 - 12V). *Nickel Plated RCA Terminals. *Nickel...

Load Capability 2? Stable. Maximum power output 720W. Rated power output (4?) 60W x 4 (4?). Rated power output 90W x 4 (2?). Bridged power output (4?) 180W x 2. CEA-2006 Compliant. Low-pass Filter. High-pass Fliter. Bass Boost Circuit. Switched Mode Power supply, with Power MOS-FET. Cooling Fan. Power Indicator. Blue Illumination. Signal Sensing Turn-on. Protection function. Line in 2 RCA (Gold Plated). Speaker level Input. Single Side Terminals. Gold Plated Power & Speaker Terminals...

Orion Car Audio Amplifier. RMS Power Rating:. 4 ohms: 375 watts x 1 chan. 2 ohms: 750 watts x 1 chan. 1 ohm: 1500 watts x 1 chan. Max power output: 3000 watts x 1 chan. Classic Orion industrial design. MOSFET power supply. Wired remote bass level control included. Tuned Bass EQ (0-18 dB bass boost at 45 Hz). IntelliQ Bass optimization circuit. Single channel monoblock operation. 1 Pair of preamp RCA outputs. Master/Copy switch for slave and master control. Heavy duty aluminum alloy...

State of the art circuit design, coupled with ultra efficient thermal transfer ensure the best current delivery possible from an amplifier series that delivers in power, style, installation and use.

Amplifier Type: Class-D (Digital). Channel Design: 4/3/2 Channel. Thermal Protection. Low-battery Protection. Power Supply Design: DC-DC PWM Power Supply. Board Circuitry: STAR Circuit. Current Protection: Auto Over-Current Protection. Power Indicator: Top Mounted Blue LED Power/Status Indicator. Crossover: Adjustable High Pass, Low Pass. Pre-Amp Stage: Discrete. Board Design: 6-Layer Glass Epoxy PC Board. Gain Control: Adjustable.

Profile amplifiers are fully assembled in the UK, using a combination of computer assisted surface mounting technology, and hand solder finishing of larger components. The final assembly process is then performed by the Genesis team with the mounting of a fully prepared circuit board into a stylish heat sink and a modern stainless steel chassis.

*500 Watts 2 Channel Amplifier. *Bridgeable. *High level speaker input. *Pulse Width Modulated (PWM) MOSFET Power Supply. *Variable input sensitivity; RCA input 0.2V to 6V. *Thermal, Overload and Short circuit protection. *Excellent muting circuitry prevents turn on/off ‘pops’. *Built-in High Pass / Full Range / Low Pass Filter switch. *Silver plated power connectors for optimum power distribution. *Silver plated speaker connectors for optimum signal output. *Dimensions: 246mm x 205.8mm...

Juice JA590 1200W 2 Channel Bridgeable Car Stereo Amplifier Juice JA590 Key Features *1200 Watts 2 Channel Amplifier *Bridgeable *High level speaker input *Pulse Width Modulated (PWM) MOSFET Power Supply *Variable input sensitivity; RCA input 0.2V to 6V *Thermal, Overload and Short circuit protection *Excellent muting circuitry prevents turn on/off ‘pops’ *Built-in High Pass / Full Range / Low Pass Filter switch *Silver plated power connectors for optimum power distribution *Silver plated speaker...

Amplifier Type: Class-D (Digital). Channel Design: 4/3/2 Channel. Thermal Protection. Low-battery Protection. Power Supply Design: DC-DC PWM Power Supply. Board Circuitry: STAR Circuit. Current Protection: Auto Over-Current Protection. Power Indicator: Top Mounted Blue LED Power/Status Indicator. Crossover: Adjustable High Pass, Low Pass. Pre-Amp Stage: Discrete. Board Design: 6-Layer Glass Epoxy PC Board. Gain Control: Adjustable. Bass Control: Remote Bass Control (Sold Separately).

Protections Short-circuit, continuous current, thermal overload. Dimensions ( H x W x D) 2-3/8 x 8-3/16 x 7-11/16“ (60x234x195mm). Nominal power measured at 13.8V continuously @ 4 Ohm 2x100W rms. Nominal power measured at 13.8V continuously @ 2 Ohm 2x140W rms. Power in bridged mode measured at 13.8V continuously @ 4 Ohm 1x260W rms. Signal/noise ratio >77dB (A). Frequency response 10Hz–60kHz.

Variable phase 0 or 180°. Protections Short-circuit, continuous current, thermal overload. Dimensions ( H x W x D) 2-3/8 x 14-3/4 x 7-11/16“(60x375x195mm). Nominal power measured at 13.8V continuously @ 4 Ohm 1x350W rms. Nominal power measured at 13.8V continuously @ 2 Ohm 1x500W rms. Signal/noise ratio >85dB (A). Frequency response 10Hz – 150Hz.

Class D Amplifier. Full Range Digital Amplifier. 2 ohm Stable Load Capability. Maximum Output Power 1600W. Rated Power Output 600W x 1 (4 ohm). Rated Power Output 700W x 1 (2 ohm). CEA-2006 Compliant. Low-pass Filter. Bass Boost Circuit by wired remote control. Infrasonic filter. Dual Sigma Drive. Dual Power Supply. Cooling Fan. Multifunctional Power Indicator. Blue Illumination. Protection function. 1 x RCA Line in (Gold Plated). 1 x RCA Line out (Gold Plated). Single Side Terminals...

Cobalt 2-Channel Class A/B Car Amplifier. RMS Power Rating: 4 ohms: 100 watts x 2 chan. 2 ohms: 155 watts x 2 chan. Bridged 4 ohms: 310 watts x 1 channel. Max power output: 600 watts. MOSFET power supply. Tri-mode and bridgeable operation. LED power and protect indicators. Illuminated blue LED stripe design. Selectable bass boost (0 6 12 dB). 2/1 channel operation. High-level inputs (signal sensing for automatic turn on). 3-Way system protection circuitry (thermal short circuit and overload...

Dual output level controls and illumination - ac accessory inlet - 110/220 voltage selector Protection circuit and indicator - stereo or bridged power into 4 or 8 ohms - dimensions: 4.19"h x 19"w x 10.75"d Power on/off switch - 2 speaker connections via banana plugs Stereo/mono selector - heavy duty fan cooling and aluminum heatsink Dual rca and xlr-1/4" combo inputs - ground lift switch

Two channel bridgeable amplification - built-in bass and treble control - frequency response: 15-30k hz - dimensions: 9.00''w x 2.25''h x 10.66''d 2x200 wattstotal output/1 x 400 watts output bridged @ 4 ohms - gold plated rca low level inputs - overload/thermal/short circuit protection Variable gain control/remote turn on/off - speaker output terminal strip - power on led indicator Moseft pulse modulation power supply - s/n retio: greater than 90db - led diagnostic condition indicator 2 ohm stereo...

Four channel amplification - high level molex input - heavy duty aluminum alloy heatsink 4 x 75 watts total output @ 4 ohms - output impedance: 4-8 ohms - power on led indicator Variable gain control - easy access speaker connections - frequency response: 20-30k hz Accepts high or low impedance inputs - remote turn on/ off - s/n ratio: >85db Gold plated rca inputs - thermal/short circuit/overload protection - dimensions: 2''h x 7.9''w x 8''l

Dual output level controls and illumination - dual rca and xlr-1/4" combo inputs - ground lift switch Protection circuit and indicator - ac accessory inlet - 110/220 voltage selector Power on/off switch - stereo or bridged power into 4 or 8 ohms - dimensions:5.13"h x 19"w x 12"d Blue color led output level display - 2 speaker connections via banana plugs Stereo/mono selector - heavy duty fan cooling and aluminum heatsink

4 x 250w rms @ 4 ohms - bass boost circuit - low pass filter controls - s/n ratio: >90db - subwoofer remote level control 4 x 500w max @ 4 ohms - bridgeable at 4 ohms - high pass filter controls - channel separation: >65db - fuse: 20a x 2 2 x 1000w max @ 4 ohms bridged - 2 ohm stereo stable - power and protection led indicators - freq. response: 10hz-45khz - dimensions: 14.96''(l) x 2.24''(h) x 8.81''(w) 4 x 350w rms @ 2 ohms - gold rca inputs - soft turn-on/turn-off - hpf freq. response...

A2002V Audiobahn 2 Channel 200W RMS Intake Series Car Amplifier. Double Sided Glass Epoxy Circuit Board. High Gloss Chrome Plated Finish. Variable High/Low Pass Crossover. Variable Subsonic Filter. Bass Boost. 3-Way Protection. RCA Throughout Connections. Digital Volt Meter with Cobalt Blue Illumination. Air Induction Fan Cooled. Cobalt Blue Illumination Side Stripes. 2 Ohm Stereo Stable. MOSFET Power Supply. 2 X 100W RMS @ 2 Ohms. 2 x 50W RMS @ 4 Ohms. Dimensions12" x 2-1/8" x 7-...

2 x 125w rms @ 4 ohms - bass boost circuit - low pass filter controls - s/n ratio: >90db - subwoofer level control 2 x 500w max @ 4 ohms - bridgeable at 4 ohms - high pass filter controls - channel separation: >65db - fuse: 25a x 1 1 x 1000w max @ 4 ohms bridged - 2 ohm stereo stable - power and protection led indicators - freq. response: 10hz~45khz - dimensions: 9.84''(l) x 2.24''(h) x 8.81''(w) 2 x 225w rms @ 2 ohms - nickle rca inputs - soft turn-on/turn-off - hpf freq. response...

2 x 500w rms @ 4 ohms - bass boost circuit - low pass filter controls - s/n ratio: >90db - subwoofer level control 2 x 1000w max @ 4 ohms - bridgeable at 4 ohms - high pass filter controls - channel separation: >65db - fuse: 40a x 1 1 x 2000w max @ 4 ohms bridged - 2 ohm stereo stable - power and protection led indicators - freq. response: 10hz~45khz - dimensions: 12.99''(l) x 2.24''(h) x 8.81''(w) 2 x 650w rms @ 2 ohms - nickel rca inputs - soft turn-on/turn-off - hpf freq. response...

Dual output level controls and illumination - dual rca and xlr-1/4" combo inputs - ground lift switch Protection circuit and indicator - ac accessory inlet - 110/220 voltage selector Power on/off switch - stereo or bridged power into 4 or 8 ohms - dimensions:5.13"h x 19"w x 12"d Blue color led output level display - 2 speaker connections via banana plugs Stereo/mono selector - heavy duty fan cooling and aluminum heatsink

Two channel amplification - high level molex input - heavy duty aluminum alloy heatsink 2 x 120 watts total output @ 4 ohms - output impedance: 4-8 ohms - power on led indicator Variable gain control - easy access speaker connections - frequency response: 20-30k hz Accepts high or low impedance inputs - remote turn on/ off - s/n ratio: >85db Gold plated rca inputs - thermal/short circuit/overload protection - dimensions: 2''h x 7.9''w x 5.25''l

*RMS Power Stereo: 75 Watt x 2 Channel @ 4 Ohm / 100 Watt x 2 Channel @ 2 Ohm / 300 Watt x 1 Channel @ 4 Ohm Mono. *Class A/B MOSFET Circuitry. *PWM MOSFET Power Supply. *double-sided Glass Epoxy Circuit Board. *THD: 0.02%. *S/N Ratio: >100dB (+/- 1dB ). *Frequency Response:10Hz - 40kHz. *Input Sensitivity: 200mV ~ 8V. *Variable 18dB Hi-pas Cross over: 50Hz - 750Hz. *Variable 18dB Low-pass Cross over: 50Hz - 120Hz. *Bass boost on / off. *Subsonic Filter: 20Hz - 50Hz. *RCA Throughput Connections...

1 x 350w rms @ 4 ohms - bass boost circuit - low pass filter controls - channel separation: >65db - fuse: 40a x 2 1 x 550w rms @ 2 ohms - bridgeable at 4 ohms - power and protection led indicators - freq. response: 10hz~45khz - dimensions: 14.96''(l) x 2.24''(h) x 8.81''(w) 1 x 800w rms @ 1 ohms - 2 ohm stereo stable - soft turn-on/turn-off - hpf freq. response: 80khz 1 x 2400w max @ 1 ohms - gold rca inputs - thd: 90db - subwoofer remote level control