car amplifier for sale : 364 results priced between £25.00 and £350.00

Booster Adaptor for In-car Amplifiers Converts high level output from the car stereo to a low-level input for in-car amplifiers, while providing ground loop isolation. Dimensions (mm) 60x33 Weight (kg) 0.064 Impedance (Ohms) 4 Frequency Response (Hz) 40-32000

Details Bumper Booster Adaptor for In-Car Amplifiers from our Car Audio Accessories In Car Entertainment range. The B070A by Unbranded. Converts high level output from the car stereo to a low-level input for in-car amplifiers, while providing ground loop isolation. Technical SpecificationsImpedance (Ohms) 4Frequency Response (Hz) 40-32000Dimensions 60x33 SKU: 03-B070A

Bass Face DB1.1 1500W Monoblock Subwoofer Amplifier for Car

BELKIN F8Z752TT03 ROTATING 2.1 AMPLIFIER WALL AND CAR CHARGER FOR IPOD/IPHONE FEATURES 90º ROTATING PRONGS WITH USB PORT TO CHARGE COMPATIBLE DEVICES RAPID-CHARGE USB PORT 1-YEAR LIMITED WARRANTY INCLUDES 4FT CHARGE/SYNC USB TO 30-PIN CONNECTOR

Jl Audio Rbc-1 Bass Controller For Jl Car Amplifiers

mono subwoofer amplifier. 175 watts RMS x 1 at 4 ohms (300 watts RMS x 1 at 2 ohms). 500 watts RMS x 1 at 1 ohm. CEA-2006 compliant. Boosted Rail amp technology. Dynamic Thermal Management cooling system. variable low-pass filter (35-250 Hz, 12 dB/octave). differential-balanced inputs eliminate noise from your vehicle's electrical system. preamp and speaker-level inputs. optional wired remote bass boost (0-18 dB at 45 Hz). 8-gauge power and ground leads and an 80-amp fuse recommended —...

mono subwoofer amplifier. 75 watts RMS x 1 at 4 ohms (150 watts RMS x 1 at 2 ohms). 300 watts RMS x 1 at 1 ohm. CEA-2006 compliant. Boosted Rail amp technology. Dynamic Thermal Management cooling system. variable low-pass filter (35-250 Hz, 12 dB/octave). differential-balanced inputs eliminate noise from your vehicle's electrical system. preamp and speaker-level inputs. optional wired remote bass boost (0-18 dB at 45 Hz). 10-gauge power and ground leads and a 30-amp fuse recommended — wiring...

Magnat Edition Mono Car Amplifier

PC9-401 Audi A4 Car ISO Lead for Bose Amplifier Bypass PC9-401 Car ISO Lead for Audi - Amplified Rear Speakers Converts Audi BOSE amplified speaker system Rear Amplified speakers only Connects to Car Stereo via Speaker Level Ouput Converts the Audi Wiring Harness to Speaker Level Inputs for connecting to car stereo with ISO Lead Compatible with: Audi A4 (2004 to 2006 / Symphony Half Amplified) (2002 to 2004 / BOSE Rear Amplified) (2002 Onwards / Chorus Unit Only) (2000 to 2002 / BOSE Rear Amplified...

Four channel amplification - gold plated rca low level inputs - automotive type fuse protection 4x75 wattstotal output @ 4 ohms - s/n ratio: greater than 85db - dimensions: 9.00''w x 2.25''h x 10.66''d Variable gain control/remote turn on/off - frequency response: 15-30k hz 4 ohm speaker impedance - overload/thermal/short circuit protection Built-in bass and treble control - power on led indicator

Noise Filter for Car Amplifier Amp Audio input RCA plug. Brand:MMATS. Model:EQ-328. Designed to Eliminate Noise. This noise filter connects in between the radio and the amplifier on the RCA Cables. You simply plug it in, in-line with the RCA cables and it will help supress and virtually eliminate the unwanted hisses, pops and whines that you system may be experiencing. Used w/Amplifier. Matches Impedance between Amp & Deck. RCA Plug Input. RCA Socket Output. This Noise Filter can help you...

I.SOUND ISOUND-2147 2.1 AMPLIFIER CAR CHARGER FOR IPAD/IPOD/IPHONE POWER AND CHARGE ALL 30-PIN DOCK CONNECTOR IPODS AND IPHONES COMPATIBLE WITH IPAD 1G/2G LED POWER INDICATOR FITS ANY STANDARD DC OUTLET COMPACT FOR ULTIMATE PORTABILITY IDEAL FOR TRAVEL

Bass Face DB4.1 1600W Stereo 4 Channel Car Amplifier

240 Watts Total Output Power (120 Watts x 2 Channels) 3-Way Protection (Short/Thermal/Overload) Heavy Duty Aluminum Alloy Heatsink Variable Gain Control High/Low Level Input

Bass Face DB2.1 800W Stereo 2 Channel Car Amplifier

Pioneer GM-D9500F Four Channel Class-fd Car Amplifier 800 W Max

4 x 250 watts rms at 4 ohms - bass boost circuit - soft turn on/off - advanced protection circuitry - frequency response: 10hz- 40khz 4 x 500 watts max at 4 ohms - variable phase shift control - low level inputs - bass boost remote control - dimensions: 10.16''w x 2.56''h x 12.8''l 2 x 1000 watts max at 4 ohms bridged - 2 ohms stereo stable - rca line input and output - t.h.d: 95db Electronic crossover network - tri-mode configurable - power protection led indicators - channel separation...

Autoleads PC9-440 Car Audio Active Adaptor Lead OEM Amplifier Interface ISO

Bass Face POWER8.1 800W Active Under Seat Compact Car Subwoofer and Amplifier

Slim Line IC type amplifier Built in low-/ highpass x-over 2 x 50w / 1 x 100w RCA and speaker inputs Dimensions 78x38x100 mm

Max Power: 1600, Max Power Per Channel: 4x 400W_S/N Ratio: 100dB Frequency Response: 10Hz - 40KHz, THD: 0.05%, Built-in LOW/HIGH Pass Crossover Channel Separation: 76dB, High and Low Pass: 40Hz-240Hz Damping Factor: 180, Bass Boost: 0/6/12dB Dimensions: 470 x 237 x 55mm, Gold Plated Terminals

If you're after superior audio quality, look no further than the KAC-6203 amp!This KAC-6203 600 W in-car amplifier is designed for use with the most powerful systems.Input impedance: 10k

Improves FM reception for cars and boats Delivers clear and pure stereo reception, provides more transmitting stations.

1 x double shielded cable (5m) with stereo RCA connectors. 1 x control cable (5m), 0.45mm2/Ø 2.4mm. 1 x 5m positive cable, 19mm2/Ø 10mm. 1 x 90cm ground cable, 19mm2/Ø 10mm. 1 x speaker cable (9m), 2 x 1.5mm2/Ø 3.2x6.4mm. 1 x fuse holder with blue LED illumination, fitted fuse and mounting screws. 10 x nylon cable ties. 2 x cable protecting sleeves. Ring terminals, push-on terminals, forked terminals and crimp connectors in various sizes. 1 x empty tube (1.8m), Ø 14mm, suitable for cables...

Great everything. The products are what they say on the tin, the delivery is great and the customer service is nice too. I've shown all of my friends the companies site because I was very impressed.

Autolead amplifier wiring kit provide a comprehensive fitting solution from a single amplifier system up to a multi amplifier system. The kits allow you to professionally and safely install an amplifier into your vehicle.

Amplifier Type: Class-A/B. 320 watts 2 channel amplifier. Per Channel into 4ohms (≤1%THD+N): 2 x 50W. Per Channel into 2ohms (≤1%THD+N): 2 x 75W. Bridged into 4ohms (≤1%THD+N): 1 x 150W. Channel Design: 2/1 Channel. Thermal Control: Thermal Management Control. Power Supply: DC-DC PWM Power Supply. Power Supply Design: MOSFET Power. Board Circuitry: STAR Circuitry. Current Protection: Over-Current, Over-Voltage and Thermal Protection. Power Indicator: Top Mounted Blue LED Power Indicator...

The GT's DPS™ (Dynamic Power System™) ensures high efficiency and ouput stages, increased power with lower impedance and maximum dynamics and transient response

RMS Power Output: 200W x 4ch + 400W x 1ch. Bridge Power Output: 100W x 4ch + 200W x 1ch. Frequency Response: 10HZ - 50KHZ. Signal to Noise Ratio: 90db. Speaker Impedance: 2 - 8ohm. Channel Separation: 90db. Dimensions: 446 x 260 x 58mm. Net Weight: 4.25Kg.

2 x 100 W @ 4 Ohm. 2 x 150 W @ 2 Ohm. 300 W Bridged Output Power @ 4 Ohm. 600 W Bridged Maximum Output Power @ 4 Ohm. Built-in Low-pass Filter 80Hz (-12dB/oct). Variable input sensitivity 0.2 ~ 5 V. Frequency response 10 ~ 50 kHz. Signal noise ratio < 100 dB. Maximum current consumption 30 A. 2 Ohm Load Capability. Aluminum Die-casting Heat Sink. Speaker Level Input. RCA Line Input Terminals. Power MOSFET Switching Power Supply. Power Indicator with Red LED.

1100w Max. 1 x 300w RMS at 4 Ohms. 1 x 550w RMS at 2 Ohms. Class D. MOSFET Switching Power Supply.

MPN: KACX4D - 105 dB SNR - 1% THD - 20 Hz to 20 kHz - CEA-2006, CE, FCC. These teference fit amplifiers will satisfy the discerning mobile audiophile with its simple design and unyielding power. These amplifiers are built to be easily installed in the tightest applications yet they provide the power required to pump out the sound you want to hear. Product Features ?1200W Maximum power ?Built-in variable low-pass filter ?Built-in variable high-pass filter ?Power MOS-FET switching power supply ...