car amplifier from : 903 results priced between £25.00 and £450.00

Magnat Edition Mono Car Amplifier

Four channel amplification - gold plated rca low level inputs - automotive type fuse protection 4x75 wattstotal output @ 4 ohms - s/n ratio: greater than 85db - dimensions: 9.00''w x 2.25''h x 10.66''d Variable gain control/remote turn on/off - frequency response: 15-30k hz 4 ohm speaker impedance - overload/thermal/short circuit protection Built-in bass and treble control - power on led indicator

Bass Face DB4.1 1600W Stereo 4 Channel Car Amplifier

240 Watts Total Output Power (120 Watts x 2 Channels) 3-Way Protection (Short/Thermal/Overload) Heavy Duty Aluminum Alloy Heatsink Variable Gain Control High/Low Level Input

Bass Face DB2.1 800W Stereo 2 Channel Car Amplifier

Pioneer GM-D9500F Four Channel Class-fd Car Amplifier 800 W Max

4 x 250 watts rms at 4 ohms - bass boost circuit - soft turn on/off - advanced protection circuitry - frequency response: 10hz- 40khz 4 x 500 watts max at 4 ohms - variable phase shift control - low level inputs - bass boost remote control - dimensions: 10.16''w x 2.56''h x 12.8''l 2 x 1000 watts max at 4 ohms bridged - 2 ohms stereo stable - rca line input and output - t.h.d: 95db Electronic crossover network - tri-mode configurable - power protection led indicators - channel separation...

Max Power: 1600, Max Power Per Channel: 4x 400W_S/N Ratio: 100dB Frequency Response: 10Hz - 40KHz, THD: 0.05%, Built-in LOW/HIGH Pass Crossover Channel Separation: 76dB, High and Low Pass: 40Hz-240Hz Damping Factor: 180, Bass Boost: 0/6/12dB Dimensions: 470 x 237 x 55mm, Gold Plated Terminals

Autoleads PC9-440 Car Audio Active Adaptor Lead OEM Amplifier Interface ISO

Bass Face POWER8.1 800W Active Under Seat Compact Car Subwoofer and Amplifier

Slim Line IC type amplifier Built in low-/ highpass x-over 2 x 50w / 1 x 100w RCA and speaker inputs Dimensions 78x38x100 mm

Booster Adaptor for In-car Amplifiers Converts high level output from the car stereo to a low-level input for in-car amplifiers, while providing ground loop isolation. Dimensions (mm) 60x33 Weight (kg) 0.064 Impedance (Ohms) 4 Frequency Response (Hz) 40-32000

Details Bumper Booster Adaptor for In-Car Amplifiers from our Car Audio Accessories In Car Entertainment range. The B070A by Unbranded. Converts high level output from the car stereo to a low-level input for in-car amplifiers, while providing ground loop isolation. Technical SpecificationsImpedance (Ohms) 4Frequency Response (Hz) 40-32000Dimensions 60x33 SKU: 03-B070A

If you're after superior audio quality, look no further than the KAC-6203 amp!This KAC-6203 600 W in-car amplifier is designed for use with the most powerful systems.Input impedance: 10k

Improves FM reception for cars and boats Delivers clear and pure stereo reception, provides more transmitting stations.

Great everything. The products are what they say on the tin, the delivery is great and the customer service is nice too. I've shown all of my friends the companies site because I was very impressed.

Autolead amplifier wiring kit provide a comprehensive fitting solution from a single amplifier system up to a multi amplifier system. The kits allow you to professionally and safely install an amplifier into your vehicle.

Amplifier Type: Class-A/B. 320 watts 2 channel amplifier. Per Channel into 4ohms (≤1%THD+N): 2 x 50W. Per Channel into 2ohms (≤1%THD+N): 2 x 75W. Bridged into 4ohms (≤1%THD+N): 1 x 150W. Channel Design: 2/1 Channel. Thermal Control: Thermal Management Control. Power Supply: DC-DC PWM Power Supply. Power Supply Design: MOSFET Power. Board Circuitry: STAR Circuitry. Current Protection: Over-Current, Over-Voltage and Thermal Protection. Power Indicator: Top Mounted Blue LED Power Indicator...

The GT's DPS™ (Dynamic Power System™) ensures high efficiency and ouput stages, increased power with lower impedance and maximum dynamics and transient response

RMS Power Output: 200W x 4ch + 400W x 1ch. Bridge Power Output: 100W x 4ch + 200W x 1ch. Frequency Response: 10HZ - 50KHZ. Signal to Noise Ratio: 90db. Speaker Impedance: 2 - 8ohm. Channel Separation: 90db. Dimensions: 446 x 260 x 58mm. Net Weight: 4.25Kg.

2 x 100 W @ 4 Ohm. 2 x 150 W @ 2 Ohm. 300 W Bridged Output Power @ 4 Ohm. 600 W Bridged Maximum Output Power @ 4 Ohm. Built-in Low-pass Filter 80Hz (-12dB/oct). Variable input sensitivity 0.2 ~ 5 V. Frequency response 10 ~ 50 kHz. Signal noise ratio < 100 dB. Maximum current consumption 30 A. 2 Ohm Load Capability. Aluminum Die-casting Heat Sink. Speaker Level Input. RCA Line Input Terminals. Power MOSFET Switching Power Supply. Power Indicator with Red LED.

1100w Max. 1 x 300w RMS at 4 Ohms. 1 x 550w RMS at 2 Ohms. Class D. MOSFET Switching Power Supply.

MPN: KACX4D - 105 dB SNR - 1% THD - 20 Hz to 20 kHz - CEA-2006, CE, FCC. These teference fit amplifiers will satisfy the discerning mobile audiophile with its simple design and unyielding power. These amplifiers are built to be easily installed in the tightest applications yet they provide the power required to pump out the sound you want to hear. Product Features ?1200W Maximum power ?Built-in variable low-pass filter ?Built-in variable high-pass filter ?Power MOS-FET switching power supply ...

The Xplod XM-ZR606 car amplifier from Sony has a maximum output power of 350 W over 1 or 2 channels. The XM-ZR606 is equipped with a low pass selectable filter, gold-plated connections and a MOFSET power source for superior performances from your car&rsquos audio system.

Why sacrifice performance for the sake of convenience? With a slimmer chassis; ARMOR is the perfect amplifier when space is limited; and power is required. Indeed; this combination of feature-rich performance and put-it-anywhere convenience is hard to find in the automotive environment; so much so that the ARMOR may well be forging its own product category.

Applicable Octroi charges if any, will be collected from the consignee. Delivery will be made between 10 am to 7 pm on all working days.

BELKIN F8Z752TT03 ROTATING 2.1 AMPLIFIER WALL AND CAR CHARGER FOR IPOD/IPHONE FEATURES 90&ordm; ROTATING PRONGS WITH USB PORT TO CHARGE COMPATIBLE DEVICES RAPID-CHARGE USB PORT 1-YEAR LIMITED WARRANTY INCLUDES 4FT CHARGE/SYNC USB TO 30-PIN CONNECTOR

The MRX-F30 4-channel amp puts out 50 watts RMS per channel, so you'll have plenty of volume to fill your listening space with music. You can even use it in 2-channel mode to drive a pair of components or subs with 150 watts each. Onboard frequency filters let you tailor the output to fit your setup, and a bass boost on the rear channels helps to fatten up the sound.

Thanks for the very prompt delivery of the product, me having ordered the wrong one first of all! you promptly dispatched the right one and credited my card very quickly when you received the returned one. Excellent service and very helpful, also the product which was for a 2005 Fiat Ducato motorhome was easy to fit and looked the same as the original. Would recommend your company to friends.

MPN: KACX1D - 600 W RMS - 1.60 kW PMPO - 1 Channel - Class D - 105 dB SNR - 1% THD - 20 Hz to 200 Hz - CEA-2006, CE, FCC.  Product Features ?1600W maximum output power ?Built-in variable low-pass filter ?Bass Boost control by remote ?Wired remote included Kenwood Car Audio Mono Amplifier Maximum output power: 1600W Built-in variable low-pass filter Built-in variable infrasonic filter Remote Bass Boost control Technical Details Kenwood Car Audio Mono Amplifier Maximum output power: 1600W...

The Xplod XM-ZR604 car amplifier from Sony has a maximum output power of 300 W over 3 or 4 channels. The XM-ZR604 is equipped with high pass and low pass selectable filters, gold-plated connections and a MOFSET power source to ensure superior performances from your car&rsquos audio system.

1. Compact design built from an extruded aluminum heatsink with the top side ensuring effective transfer of the heat generated by the power electronic components. 2. Special balanced input circuitry to reject electro-magnetic disturbances present on the Pre-In or Speaker-In inputs. 3. Input featuring both Speaker-In (OEM radio) and RCA-In (Aftermarket radio) inputs. 4. Selectable ART, Automatic Remote Turn-On/Off function, automatically turns on and off the amplifier when the OEM radio turns on...