Carburettors Mx5
[27 results priced between £0£200]

Sort:
27 carburettors mx5 £0 £200 /l/carburettors-mx5
  • Manifold Mazda MX5 (NB) 1.8 -TB
    Manifold Mazda MX5 (NB) 1.8 -TB

    An inlet manifold to mount TB style throttle bodies to a Mazda MX5 1.8 NB engine- not suitable for Carburettors due to angle

    £173.00
    jenvey.co.uk
  • Manifold Mazda MX5 1.6 TB
    Manifold Mazda MX5 1.6 TB

    An inlet manifold to mount 42mm TB style throttle bodies to a Mazda MX5 1.6 engine- not suitable for Carburettors due to angle

    £173.00
    jenvey.co.uk
  • Manifold Mazda MX5 2.0 TB
    Manifold Mazda MX5 2.0 TB

    An inlet manifold to mount TB style throttle bodies to a Mazda MX5 2.0 NC engine- not suitable for Carburettors due to angle. This may also fit any kit car using the Mazda Gearbox as it has an extra 10 degrees of angle.

    £435.00
    jenvey.co.uk
  • Tuning SU Carburettors
    Tuning SU Carburettors

    This book looks into the basic design of the SU carb. It covers many areas including overhaul, tuning mixtures, jet and needle identifications. Hundreds of line illustrations of different types of SU carb models as used on many classic cars. 187 pages.

    £16.74
    moss-europe.co.uk
  • Weber Carburettor Inlet Manifold
    Weber Carburettor Inlet Manifold

    All manifolds are supplied with fittings and seal plates. For further details please contact your nearest Moss branch. With some installations when using Weber carburettors, the inlet manifold no longer supports a closed circuit engine breather system.

    £572.95
    moss-europe.co.uk
  • Single Carburettor Cross Over Manifold
    Single Carburettor Cross Over Manifold

    This TriumphTune designed 15cm long cross over manifold will produce a better distribution of gases, resulting in improved mid range power and a more tractable road vehicle. This single inlet manifold must use a slim K&N filter, either KN56-1270 or KN56-9106. The recommended carburettor size is a 45, although a 40 may be used. The manifold is supplied complete with studs, nuts and sealing plates.

    £101.95
    moss-europe.co.uk
  • Single Carburettor Parallel Manifold
    Single Carburettor Parallel Manifold

    This standard 12cm long manifold allows a deeper K&N filter, KN56-9104, to be used, but is not overly efficient in distributing the gases and providing maximum flow; it will, however, provide much improved upper range power. Supplied as a kit, including the necessary linkages, and is ready to fit.

    £258.95
    moss-europe.co.uk
  • Weber Carburettors Carburettor, Weber, 45 Race
    Weber Carburettors Carburettor, Weber, 45 Race

    Carburettor kits are supplied as separate components to suit individual needs. The carburettors we supply are fitted with the basic jets/chokes that are correct for most applications, although these will still require final tuning on the car for maximum performance/economy.

    £424.96
    moss-europe.co.uk
  • Grose-Jets SU H/HS Carburettors
    Grose-Jets SU H/HS Carburettors

    If you have converted to SU carburettors and would like the float chambers to benefit from the latest type needle valves, then here is the answer. Grose-Jets, with their modern technology don't stick open like the old needle and valve units.

    £8.95
    moss-europe.co.uk
  • Nitrophyl Carburettor Float
    Nitrophyl Carburettor Float

    Old carburettor floats have an infuriating habit of cracking and gradually filling with fuel. Replace old floats with our new SU-H and HD Series float which is moulded from a modern material called Nitrophyl, which is now specified for just about every fuel float in modern cars. It will not crack or absorb fuel and is impervious to new fuel formulations.

    £14.95
    moss-europe.co.uk
  • Piper Ram Pipes Single Choke Carburettors: 1' HS6 Carburettors
    Piper Ram Pipes Single Choke Carburettors: 1' HS6 Carburettors

    Not only do these ram pipes improve air flow into the carburettor by reducing turbulence - thanks to their full radiused mouths, they also look good. Our ram pipes for single choke carburettors are 50mm deep, they can be used on their own, with the Piper air socks, or with suitable sports air filters, depending on installation providing there is sufficient clearance from the end of the ram pipe to the sports filter case. Twin choke application ram pipes are 30mm deep, they can be used on their own...

    £24.46
    moss-europe.co.uk
  • Single Fitting Weber DCOE Carburettors Carburettor, 40 DCOE Weber (Fast Road)
    Single Fitting Weber DCOE Carburettors Carburettor, 40 DCOE Weber (Fast Road)

    £419.95
    moss-europe.co.uk
  • Weber Carburettor Inlet Manifold Medium Inlet Manifold 12.5cm
    Weber Carburettor Inlet Manifold Medium Inlet Manifold 12.5cm

    All manifolds are supplied with fittings and seal plates. For further details please contact your nearest Moss branch. With some installations when using Weber carburettors, the inlet manifold no longer supports a closed circuit engine breather system.

    £172.96
    moss-europe.co.uk
  • Wynns Service Cleaners Carburettor & Air Intake Cleaner
    Wynns Service Cleaners Carburettor & Air Intake Cleaner

    Notes: Use to clean components during servicing or reconditioning

    £5.10
    moss-europe.co.uk
  • Carburettors & Components waxstat jet
    Carburettors & Components waxstat jet

    Note: With over run throttle disc includes all service items and throttle shaft, throttle disc, 2 screws and 2 bushes

    £65.95
    moss-europe.co.uk
  • Carburettors (Twin Cam) BEARING, lower
    Carburettors (Twin Cam) BEARING, lower

    £5.95
    moss-europe.co.uk
  • Carburettors (Twin Cam) FLOAT LID, rear
    Carburettors (Twin Cam) FLOAT LID, rear

    £57.95
    moss-europe.co.uk
  • Carburettors (Twin Cam) GROSE JET, uprated
    Carburettors (Twin Cam) GROSE JET, uprated

    Notes: Superior replacement for original style needle & seat.

    £8.95
    moss-europe.co.uk
  • Carburettors GASKET, air cleaner mounting
    Carburettors GASKET, air cleaner mounting

    £0.26
    moss-europe.co.uk
  • Carburettors GASKET, carburettor mounting
    Carburettors GASKET, carburettor mounting

    £0.76
    moss-europe.co.uk
  • Carburettors NUT, mixture adjusting
    Carburettors NUT, mixture adjusting

    £2.86
    moss-europe.co.uk
  • Carburettors SCREW, jet needle retaining
    Carburettors SCREW, jet needle retaining

    £1.25
    moss-europe.co.uk
  • Carburettors THROTTLE SHAFT, oversize
    Carburettors THROTTLE SHAFT, oversize

    £13.50
    moss-europe.co.uk
  • Carburettors: SU H Type CAM, fast idle
    Carburettors: SU H Type CAM, fast idle

    £17.75
    moss-europe.co.uk
  • Carburettors: SU H Type SCREW, chamber to body
    Carburettors: SU H Type SCREW, chamber to body

    £0.46
    moss-europe.co.uk
  • Carburettors: SU H Type SCREW, needle locking
    Carburettors: SU H Type SCREW, needle locking

    £1.25
    moss-europe.co.uk
  • Carburettors: SU H Type WASHER, sealing, aluminium
    Carburettors: SU H Type WASHER, sealing, aluminium

    £3.20
    moss-europe.co.uk