fusion amplifier : 31 results priced between £50.00 and £300.00

2 channel 400 watts max power Class-AB Amplifier Technology Conformal Coated PCB - Water resistant coating protects from salt & moisture. FUSION Intercooled Simi-conductor Technology (F.I.S.T) Variable Bass Boost FUSION Regulated Amplifier Technology (F.R.A.T) Subsonic Filter Variable Low and High Pass Cross Over

5 channel 1600 watts max power Class-D Amplifier Technology - High output, greater efficiency. Conformal Coated PCB - Water resistant coating protects from salt & moisture. 1 Piece Die-Cast Heat sink - Improved thermal transfer - greatest reliability. Longer sustained output and durability. 5 Way Circuitry Protection -Thermal / Reversed Power Polarity / DC Offset Protection / High + Low Voltage. Discrete Install Panel - Covers amp setup controls & hides all cabling. FLFC Low Frequency Control - Accurate...

Fusion EN-AM30020 Encounter 2 Channel Amplifier

2 Channel 2 Ohm Stable Water resistant design Conformal coated PCB Audio detect selectable function - amplifier turns on or goes to sleep if audio is detected Selectable high pass/ full range setting Variable high pass filter Small and discrete size: 128 x 78 x 51mm

Add more power to your marine speakers by connecting a FUSION Marine Amplifier to your audio system, or install with a subwoofer to increase the bass level of your music.

500 watts @ 4 ohms, 350 watts @ 8 ohms. All tube preamp (Three 12AX7's). Dual input gain and master. Four band active EQ. Variable contour with mid frequency select. Deep and bright switch. Effects loop and tuner out with mute. XLR out with pre/post EQ and ground lift. Two Speakon outputs. Weight: 4.5 lbs.

Overview Technical Why Car Audio Plus? Fusion CA-DA41400 4 Channel Amp & Free Delivery Rated Power (Watts) 150 Watts RMS x 4 @ 4 Ohm 1% THD+N 220 Watts RMS x 4 @ 2 Ohm 1% THD+N 440 Watts RMS x 2 @ 4 Ohm Bridged 1% THD+N Mounting Dimensions Height 50mm [1-31/32"] Length 210mm [8-9/32"] Width 300mm [11-13/16"] Product Specifications Class D Frequency Response 10Hz - 100Hz Number of Channels 4 Peak Power (Watts) 1400 Rated Power (Watts) 150 Watts RMS x 4 @ 4 Ohm 1% THD+N 220 Watts RMS x 4 @...

The MS-AM-702 marine amplifier supports the ultizone technology of the stereo unit. Compact, it enables discrete installation for a performing multi-zone audio system. It benefits from the class D technology: for power saving and better sound production (the MS-AM 702 amplifier only turns on at audio signal).

Overview Add more power to your marine speakers by connecting a FUSION Marine Amplifier to your audio system, or install with a subwoofer to increase the bass level of your music. Marine Amplifiers feature anti-corrosion treated PCB’s and stainless steel end panels for maximum corrosion protection. Generally, a 2 Channel Marine Amplifier is used to power a Marine Subwoofer, increasing the level of your audio system. Mounting Dimensions Depth 330mm Height 57.5mm Length 220mm Product Specifications...

Amplifier integrated in the subwoofer box. Complete connection accessories in the delivery. Subwoofer frequency range: 36 - 250 Hz. Subwoofer make: Housing. Music (max.) subwoofer: 360 Watts. Subwoofer RMS: 120 Watts. 25 cm subwoofer in the bass-reflex casing. 360 W music output. Product Condition: BRAND NEW. 1 Year Manufacturer Warranty.

* Input voltage: 12V. * Max Power: 400W. * Channels: 2. * Bandwidth: 10Hz -40kHz. * Fuse rating: 1x 25A. * Dimensions (mm) 220w x 260L x 57.5H.

FUSION FM-402 2 Channel Marine AmplifierThe FUSION FM Series Marine amplifiers are purpose built for the marine environment, boasting some of the most impressive environmental protection available, to deliver performance on the water like never before.Incorporating heat-tempered and conformal coated PCB's for maximum product life and gold plated connectors for improved signal flow - The result is a clean and powerful reproduction of the input signal, delivering enough power to rock the boat.The ...

FUSION's Marine Zone Amplifier is designed to support the multi-zone technology of the Marine Stereo Unit. The Zone Amplifier is small, enabling discrete installation and when combined with the Marine Stereo Unit provides the platform for a True multi-zone audio system.

MONO channel 2000W BASS amplifier (1-ohm stable). Bass Boost @ 45Hz: 0-12db. Frequency Response: 20Hz - 350Hz. Fuse Rating 40amp x 3. Input Impedence: 20k. Input sensitivity: 0.2v - 8v. Max Power Rating: 2000w. RMS Ratings Per Channel:. 600 x 1 @ 4ohms. 900 x 1 @ 2ohms. 1000 x 1 @ 1ohm. Variable Low Pass Filter: 6db / Octave. Dimensions: 436mm(L) x 278mm(W) x 60mm(H). Amplifier Class: Class D. Variable LPF (35Hz-350Hz). Variable HPF (35Hz-350Hz). Crossover Selector Switch for easy...

Tube Preamp Bass Amp Head featuring Motorised Control Knobs

Overview Introducing our most efficient, stunning and powerful marine amplifier. The stainless steel MS-DA51600 will resist corrosion and the incredible 1600 watt output (peak) will power 4 speakers and 1 subwoofer with ease. The MS-DA51600 is FUSION's first 5 Channel Class-D Hi-Fi Marine amplifier; the key benefit of a Class-D amplifier is low battery drain with a high output, making this the perfect amplifier for the marine environment. The MS-DA51600 has conformal coated PCB's for maximum...

* Input voltage: 12V. * Max Power: 140W (2 x 70W). * Channels: 2. * Conformal coated PCBs. * Bandwidth: 10Hz -40kHz. * Fuse rating: 1x 25A. * Dimensions (mm) 128w x 78D x 51H.

Details Introducing our most efficient, stunning and powerful marine amplifier. The stainless steel MS-DA51600 will resist corrosion and the incredible 1600 watt output (peak) will power 4 speakers and 1 subwoofer with ease. The MS-DA51600 is FUSION's first 5 Channel Class-D Hi-Fi Marine amplifier; the key benefit of a Class-D amplifier is low battery drain with a high output, making this the perfect amplifier for the marine environment. The MS-DA51600 has conformal coated PCB's for maximum product...

FOUR Channel amplifier (can be bridged into 3 or 2 channel mode). Bass Boost @ 45Hz. Channel Seperation >50dB. Frequency Response (-3dB) 10Hz - 40kHz. Fuse Rating 40A x 2. Input Impedance 20K. Input Sensitvity 0.2V - 8V. Max Power Rating (Watts) 900. 90 Watts RMS per Channel @ 4 Ohms. 125 Watts RMS per Channel @ 2 Ohms. 230 Watts RMS Bridged @ 4 Ohms. Signal to Noise >87dB. THD @ Rated Power 1% (1kHz). Variable High Pass Filter 6dB / Octave. Variable Low Pass Filter 6dB / Octave. Variable...

FUSION FM-504 4 Channel Marine AmplifierThe FUSION FM Series Marine amplifiers are purpose built for the marine environment, boasting some of the most impressive environmental protection available, to deliver performance on the water like never before.Incorporating heat-tempered and conformal coated PCB's for maximum product life and gold plated connectors for improved signal flow - The result is a clean and powerful reproduction of the input signal, delivering enough power to rock the boat.The ...

Add more power to your marine speakers by connecting a FUSION Marine Amplifier to your audio system, or install with a subwoofer to increase the bass level of your music.

FUSION’s pre-packaged Amplifier Installation Kits make for seamless car audio installations. The AC-AK04E includes: - 5m 4 gauge power cable, 5m 4 gauge ground cable, 5m 18 gauge remote cable, 5m 18 gauge speaker cable, 5m standard RCA interconnect, AUE fuse holder, 1.8m of protective sleeving, 8 x cable ties,- 2 x 4 gauge nickel plated ring terminals, 2 x 4 gauge nickel plated fork terminals, 1 x 18 gauge nickel plated fork terminals, 2 x 4.8mm nickel plated female ,speaker terminals, 2 x 2.5mm...

State of the art circuit design, coupled with ultra efficient thermal transfer ensure the best current delivery possible from an amplifier series that delivers in power, style, installation and use.

Fusion 700 Watt 4 Channel Car Amplifier. RMS Power:. 50 Watt x 4 Channel @ 4 Ohm. 80 Watt x 4 Channel @ 2 Ohm. 160 Watt x 2 Channel @ 4 Ohm Bridged. 700 Watt MAX. Frequency Response (-3dB): 10Hz - 100kHz. Dimensions: 300mm x 230mm x 49mm. (14-27/32" x 9-1/16" x 1-15/16"). Part Number: CA-AM40700. Product Condition: BRAND NEW. 1 Year Manufacturer Warranty.

Brand New Fusion 1400 Watt 4 Channel Car Amplifier. RMS Power:. 150 Watt x 4 Channel @ 4 Ohm. 220 Watt x 4 Channel @ 2 Ohm. 440 Watt x 2 Channel @ 1 Ohm. 1400 Watt MAX. Frequency Response: 10Hz - 100kHz. Bass Boost: 0-12dB. Hi/Low Pass Crossover. Part Number: CA-DA41400. Product Condition: BRAND NEW. 1 Year Manufacturer Warranty.

FUSION’s pre-packaged Amplifier Installation Kits make for seamless car audio installations. The AC-AK08E includes: - 5m 8 gauge power cable, - 5m 8 gauge ground cable, - 5m 18 gauge remote cable, - 5m 18 gauge speaker cable, - 5m standard RCA interconnect, - AUE fuse holder, - 1.8m of protective sleeving - 8 x cable ties, 2 x 8 gauge nickel plated ring terminals, 2 x 8 gauge nickel plated fork terminals, 1 x 18 gauge nickel plated fork terminals, 2 x 4.8mm nickel plated female speaker terminals...

Crystal clear highs and mids and earth shattering bass are achieved by incorporating state of the art “D Class” circuit design and PCB topography.

80W RMS x 4 + 250W RMS x 1 @ 4Ω 1%THD+N: 130W RMS x 4 + 330W RMS x 1 @ 2Ω 1% THD+N: 250W RMS x 2 @ 4Ω Bridged 1% THD+N + 250W RMS x 1 @ 4Ω 1%THD+N

Bandwidth 10Hz ¨C 40kHz. Signal to Noise >95dB. Fuse Rating 2 x 25A. Separation >60dB. Input Sensitivity 300mV-8V. LP Variable Crossover 40 Hz ¨C 160Hz @ 12 dB / octave. HP Variable Crossover 40 Hz ¨C 600Hz @ 12 dB / octave. Variable Bass Boost 0 - + 18dB @ 45Hz. Variable Sub Sonic Filter 20 Hz ¨C 55Hz @ 18dB / octave. Input Impedance 20K¦¸. Damping Factor >200. T.H.D 0.05%. Dimensions D 57.5mm L 330mm H 220mm.