jl audio amplifiers : 169 results priced between £50.00 and £700.00

Unlike primitive line-output converters that only reduce the level of factory audio signals the CleanSweep CL441dsp employs a powerful DSP (Digital Signal Processor) to automatically analyze the frequency response of a full-range factory audio signal and then applies 30 bands of powerful equalization to each channel. This counteracts any factory equalization and provides a clean flat signal for your aftermarket amplifiers and speaker systems to sound their best.

1000 W 3 Ω 12" Subwoofer. Black high-grade automotive carpet with gloss-black laminated decorative front baffle trim. Three solid aluminum bars provide stylish and rugged woofer protection. CNC-Cut High-Grade MDF Construction:. Recommended amplifier power: 400 - 1000W. Nominal Impedance: 3 ohms.

250 Watt 4 ohms 8” Subwoofer. Finish: Black high-grade automotive carpet with silver "JL AUDIO" embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF. Recommended amplifier power: 100 - 250W. Nominal Impedance: 4 ohms.

1000 watt 3 ohm Single 12” Subwoofer Enclosure. Finish: Dark gray high-grade automotive carpet with black carpet on woofer baffle. "JL AUDIO" is embroidered. in silver on the top surface of the enclosure. Construction: CNC-Cut High-Grade MDF. Recommended amplifier power: 300 - 750W. Nominal Impedance: 3 ohm.

JL Audio Class A/B 2 Channal Amplifier. . 70 Watts RMS x 4 @ 4 ohm. 90 Watts RMS x 4 @ 2 ohm. 180 Watts RMS x 2 @ 4 ohm bridged. Frequency Response 20 Hz - 20 Hz (+0 -1dB). S/N Ratio referred to highest rated power - >100 dB below rated power (A-weighted 20 Hz - 20 kHz noise bandwidth). Min Copper Power / Ground Wire Gauge - 4AWG Cable. Dimensions (LxWxH) 15.40" x 7.68" x 2.15". Weight of Amplifier 3.45 kg. JL Audio JX360/4 Car Amplifier.

Class A/B Monoblock Subwoofer Amplifer. 340 Watts RMS x 1 @ 4 ohm. 420 Watts RMS x 1 @ 3 ohm. 500 Watts RMS x 1 @ 2 ohm. Frequency Response 10 Hz - 150 Hz (+0 -1dB). S/N Ratio referred to highest rated power - >90 dB below rated power (A-weighted 20 Hz - 20 kHz noise bandwidth). Min Copper Power / Ground Wire Gauge - 4AWG Cable. Dimensions (LxWxH) 348mm x 195mm x 53mm. JL Audio JX500/1 Car Amplifier.

Class A/B Monoblock Subwoofer Amplifer. 500 Watts RMS x 1 @ 4 ohm. 750 Watts RMS x 1 @ 3 ohm. 1000 Watts RMS x 1 @ 2 ohm. Frequency Response 20 Hz - 150 kHz (+0 -1dB). S/N Ratio referred to highest rated power - >75 dB below rated power (A-weighted 20 Hz - 20 kHz noise bandwidth). Min Copper Power / Ground Wire Gauge - 4AWG Cable. Dimensions (LxWxH) 198mm x 278mm x 53mm. JL Audio JX1000/1 Car Amplifier.

Description: Five-Channel, Class D System Amplifier Inputs: Three Stereo Pairs (RCA-Type Jacks), Differential-Balanced Inputs On-board Crossover: Subwoofer Channel: 12 or 24dB/octave Low-Pass with continuously variable cutoff frequency selection from 50-500 Hz, defeatable

2-Channel Class D Full-Range Amplifier. 100Wx2 @ 2 ohms 200W 2 Channel Amplifier Inputs: One Stereo Pair (RCA-Type Jacks), Differential-Balanced Inputs On-board Crossover: State-variable, 12dB/octave Butterworth with continuously variable cutoff frequency selection from 50-500 Hz. Configurable as Low-Pass or High-Pass. Defeatable. Speaker output connections: Accept up to 12 AWG wire +12V and Ground connections: Accept up to 4 AWG wire Notes: NexD™ Ultra-High Speed Class D...

4 Channel Class D Amplifier 4 x 100W @ 2 ohms

6 Channel Class D Amplifier 6 x 100W @ 2 ohms

Description: 400W 2/3/4 Channel Marine Amplifier Patented Technology: Single Cycle Control. (U.S. Patent #6,084,450*) Inputs: Two Stereo Pairs On-board Crossover: State-variable, 12dB/octave Butterworth with continuously variable cutoff frequency selection from 50-500 Hz. Configurable as Low-Pass or High-Pass. Defeatable. Speaker output connections: Accept up to 12 AWG wire +12V and Ground connections: Accept up to 4 AWG wire

Description: Monoblock Subwoofer Amplifier Patented Technology: Single Cycle Control. (U.S. Patent #6,084,450*) Inputs: Differential-balanced with RCA jack inputs On-board Crossover: State-variable, 12 dB/octave Butterworth or 24 dB/octave Linkwitz-Riley with continuously variable cutoff frequency selection from 50 - 500 Hz (defeatable). Preamp Output: Buffered pass-through type Infrasonic Filter: 24 dB/octave Butterworth @ 30 Hz, defeatable Dual mono subwoofer output connections...

Description: 600W 3/4/5/6 Channel Amplifier Patented Technology: Single Cycle Control. (U.S. Patent #6,084,450*) Inputs: For superior noise immunity, RCA jack inputs On-board Crossover: State-variable, 12dB/octave Butterworth with continuously variable cutoff frequency selection from 50-500 Hz. Configurable as Low-Pass or High-Pass. Defeatable. Speaker output connections: Accept up to 12 AWG wire +12V and Ground connections: Accept up to 4 AWG wire

4-channel Class-D Full-Range Amplifier. 150 Watts x 4 @ 1.5-4 ohms

Remote Bass Control for Select JL Audio Amplifiers

3-Channel Class D System Amplifier, 75 W x 2 @ 4 Ω + 300 W x 1 @ 2 Ω - 14.4V

4 Channel Car Amplifier. 60 Watts x 4 RMS @ 4 ohm. 90 Watts x 4 RMS @ 2 ohm. 180 Watts x 2 RMS @ 4 ohm bridged . Frequency Response 12 Hz - 22 kHz (+0 -1dB). S/N Ratio >84 dB (A-weighted 20 Hz - 20 kHz noise bandwidth). Min Copper Power / Ground Wire Gauge - 4 AWG Cable. Dimensions (LxWxH) - 180mm x 216mm x 52mm. JL Audio XD400/4 Car Amplifier.

Monoblock Car Amplifier. 400 Watts x 1 RMS @ 4 ohm. 500 Watts x 1 RMS @ 3 ohm. 600 Watts x 1 RMS @ 2 ohm. Frequency Response 7 Hz - 500 Hz (+0 -1dB). S/N Ratio >87 dB below rated power (A-weighted 20 Hz - 20 kHz noise bandwidth). Min Copper Power / Ground Wire Gauge - 4 AWG Cable. Dimensions (LxWxH) - 180mm x 216mm x 52mm. JL Audio XD600/1 Car Amplifier.

Class A/B Two-Channel Full-Range Amplifier. Inputs: Two Stereo Pairs (RCA Low-Level or multi-pin High-Level) with 2/4 Channel Input Switch. On-board Crossover: 12dB/octave High-Pass or Low-Pass with continuously variable cutoff frequency selection from 50 - 200 Hz. Defeatable. Preamp Output: Pass-through with RCA-type jacks, summed from both input pairs. Rated Power 14.4 V Stereo:. 70W RMS x 4 @ 4 ohms. 90W RMS x 4 @ 2 ohms. Rated Power 14.4 V Bridged : 180W RMS x 2 @ 4 ohms. Rated Power...

JL Audio designed their W3v3 subwoofers to deliver powerful, accurate bass with a medium-power amplifier. Their extensive motor assembly research resulted in a design that ensures smooth, precise cone movement at any power level. Exclusive cooling features shunt heat away from the sub's internal motor structure for long term durability and reduced distortion. The W3v3 sub works well in a sealed or ported enclosure.

System integration sound processor with automatic digital EQ. Automatically equalizes output of factory stereo. Speaker-level inputs (front and rear). Two sets of preamp outputs (front and rear) for connection to external amplifiers. 120-band digital equalizer. Auxiliary input. Dash-mountable volume knob and source selector. 8-1/4"W x 1-1/2"H x 4-3/8"D.

The TR350-CXi is a perfect drop-in replacement for vehicles that require a 3.5-inch speaker. Designed for smooth, balanced output above 130 Hz and capable of handling the power of today's high-powered head units or a small amplifier, the TR350-CXi will impress you with its big, bold sound. Injection-molded, mica-filled, polypropylene cone body, 0.75 in. / 19 mm voice coil, symmetrical-roll spider, polyether foam surround. 0.50 in. / 12 mm textile dome tweeter with integral phase plug, neodymium...

The TR400-CXi is a perfect drop-in upgrade for most vehicles that accept a 4-inch round or 4x6-inch oval speaker. Designed for smooth, balanced output above 70 Hz and capable of handling the power of today's high-powered head units or a small amplifier, the TR400-CXi delivers impressive sonic output and quality. Injection-molded, mica-filled, polypropylene cone body, 1.0 in. / 25 mm voice coil, flat-profile/ symmetrical-roll spider, butyl rubber surround. Flexible mounting system with detachable...

Designed for smooth, balanced output above 60 Hz and capable of handling the power of today's high-powered head units and amplifiers, the TR525-CXi delivers impressive sonic output and quality. Injection-molded, mica-filled, polypropylene cone body, 1.0 in. / 25 mm voice coil, flat-profile/symmetrical-roll spider, butyl rubber surround. 0.50 in. / 12 mm textile dome tweeter with integral phase plug, neodymium magnet, ferrofluid cooled and damped. Continuous Power Handling: 50 Watts. Rec. Power...

200 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms. NexD™ Ultra-High Speed Class D. Dimensions: 260 mm x 180 mm x 52 mm. 5-channel car amplifer. 75 watts RMS x 4 + 180 watts RMS x 1 (at 4 ohms). 100 watts RMS x 4 + 300 watts RMS x 1 (at 2 ohms). 200 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms. variable low- and high-pass filters (50-500 Hz, 12 dB/octave, low-pass only on sub channel). optional wired remote for level control. Class D amplifier design with...

JL Audio designed the 13.5" dual voice coil W7 subwoofer to maintain linear motion during extreme cone travel, so you get a high-performance sub that's incredibly reliable. You'll find a strong cast-alloy basket and ultra-long voice coils among many impressive features which help this sub deliver profound, natural, and lifelike bass. This 1.5-ohm DVC sub should be matched with the proper amplifier and wiring to ensure optimum performance.

Evolution® TR 3.50 in. / 90 mm Coaxials The TR350-CXi is a perfect drop-in replacement for vehicles that require a 3.5-inch speaker. Designed for smooth, balanced output above 130 Hz and capable of handling the power of today's high-powered head units or a small amplifier, the TR350-CXi will impress you with its big, bold sound. Woofers: Injection-molded, mica-filled, polypropylene cone body, 0.75 in. / 19 mm voice coil, symmetrical-roll spider, polyether foam surround. Tweeters: 0.50 in. / 12...

Evolution® TR 4.00 in. / 100 mm Coaxials Includes 4x6-inch Adaptor Plates and Grilles The TR400-CXi is a perfect drop-in upgrade for most vehicles that accept a 4-inch round or 4x6-inch oval speaker. Designed for smooth, balanced output above 70 Hz and capable of handling the power of today's high-powered head units or a small amplifier, the TR400-CXi delivers impressive sonic output and quality. Woofers: Injection-molded, mica-filled, polypropylene cone body, 1.0 in. / 25 mm voice coil, flat-profile...

Evolution® TR 5.25 in. / 130 mm Coaxials Grilles Included Designed for smooth, balanced output above 60 Hz and capable of handling the power of today's high-powered head units and amplifiers, the TR525-CXi delivers impressive sonic output and quality. Woofers: Injection-molded, mica-filled, polypropylene cone body, 1.0 in. / 25 mm voice coil, flat-profile/symmetrical-roll spider, butyl rubber surround. Tweeters: 0.50 in. / 12 mm textile dome tweeter with integral phase plug, ferrite/ceramic magnet...

Rated Power 14.4 V: 400W x 1 @ 4 ohm. 700W x 1 @ 2 ohm. 1000W x 1 @ 1 ohm. THD at Rated Power: 1% @ 4 ohms. Frequency Response: 10 Hz - 160 Hz +/- 0.5 dB. Input Range: 200mV - 6.5VRMS (Low-Level). 630mV - 20.5 VRMS (High-Level). Dimensions (L x W x H): 14.60" x 9.60" x 2.15". (371 mm x 244 mm x 55 mm).

Rated Power 14.4 V: 175W x 1 @ 4 ohm. 250W x 1 @ 2 ohm. THD at Rated Power: 1% @ 4 ohms. Frequency Response: 10 Hz - 100 Hz +/- 1.0 dB. Input Range: 200mV - 4V. Dimensions (L x W x H): 10.60" x 9.60" x 2.15". (269 mm x 244 mm x 55 mm).

Rated Power 14.4 V: 340W x 1 @ 4 ohm. 500W x 1 @ 2 ohm. THD at Rated Power: 1% @ 4 ohms. Frequency Response: 10 Hz - 100 Hz +/- 1.0 dB. Input Range: 200mV - 4V. Dimensions (L x W x H): 13.20" x 9.60" x 2.15". (335 mm x 242 mm x 55 mm).

Frequency Response: 20 Hz - 150 kHz (+0, -1dB). S/N Ratio, referred to highest rated power: >75 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth). S/N Ratio, referred to 1 W: >45 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth). Damping Factor @ 4 Ω: >1000 / 50 Hz. Damping Factor @ 2 Ω:>500 / 50 Hz. THD+N @ Rated Power 1000W.

Rated Power 14.4 V: 60W x 4 @ 4 ohm 80W x 4 @ 2 ohm. Rated Power 14.4 V Bridged : 160W x 2 @ 4 ohm. THD at Rated Power: 1% @ 4 ohms. Frequency Response: 10 Hz - 25 kHz +/- 0.5 dB. Input Range: 200mV - 4V (Low-Level). 2V - 10V (High-Level). Dimensions (L x W x H): 15.40" x 9.60" x 2.15". (391 mm x 244 mm x 55 mm).