jointers tools : 82 results priced between £2.00 and £300.00

Machining of this joint is carried out by routing one piece with the inside face on the table. The matching corner inside face is machined upright against the fence. Make sure that the cutter is centred on the workpiece. The cutter can also be used for a glue joint, for joining lengths together. Ideal for speaker cabinets and drawer construction.|Please note. These tools cannot be re-sharpened. Inverted use only.

Dedicated to providing integral information about woodworking tools and techniques that other manuals overlook, the Missing Shop Manual series contain safety facts, explanations about basic project set-up, and tips for maximizing tool performance. In Jointer, woodworkers will find out how to best utilize this essential workshopp tool, and how to get the most for their money by getting the most from their equipment. Filled with clear diagrams and instructions, this pocket-sized durable manual is ideal...

Finger Jointer combines an assembley of five TCT slotting cutters with an abutting-edge cutter to produce a profile that extends the glue line threefold, resulting in an extremely strong joint. The Finger Jointer fits into any portable or stationary router with a 1/2inch collet.||Performing the cut|Timber must be machined square. The cutters should be assembled to match the spindle rotation, and be stacked at 90 degrees to one another to ease stress on the tool.

Six tungsten carbide teeth. Anti-kickback tool design for safer use. Suitable for natural timbers, particle and MDF boards. Thin body for use with the Trend, Freud & Casals biscuit jointing machines. Specification: Diameter : 100 mm Bore : 22 mm Kerf : 4 mm No. of Teeth : 6

Trend Craft Biscuit Blade 100X6Tx4mmx22mm (Tct Jointing Systems / Biscuit Jointer Blades) Six Tungsten Carbide Teeth. Anti-kickback tool design for safer use. Suitable for natural timbers, particle and MDF boards. Dimensions: Diameter: 4 inch Diameter: 100mm Bore=22mm K=4mm Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding VAT.

Festool D 12-NL 70 HW Cutter for DF 700 Jointer Routing tools with threaded supports for the DOMINO joining machine XL DF 700. Specifications: D - 12 mm NL - 70 mm

Routing tools with threaded supports for the DOMINO joining machine XL DF 700.Specifications:D - 10 mmNL - 70 mm...

Festool D 14-NL 70 HW Cutter for DF 700 Jointer Routing tools with threaded supports for the DOMINO joining machine XL DF 700. Specifications: D - 14 mm NL - 70 mm

Festool D 8-NL 50 HW Cutter for DF 700 Jointer Routing tools with threaded supports for the DOMINO joining machine XL DF 700. Specifications: D - 8 mm NL - 50 mm

The finger jointer combines an assembly of five TCT slotting cutters with an abutting-edge cutter to produce a profile that extends the glue line threefold, resulting in an extremely strong joint. It fits into any portable or stationary router with a 1/2" collet. To perform the cut the timber must be machined square. The cutters should be assembled to match the spindle rotation, and be stacked at 90° to one another to ease the stress on the tool.

The NEW BPJ140 is another addition to Makita's 14.4v Li-ion tool programme. The same easy-to-grip slim motor housing as used for model BGA452 ensuring a compact and lightweight design. Angle adjustable fence with positive stops at 0, 45 and 90 degrees. Blade cover can be opened with clamp screws for easy blade change. Shaft lock for easy blade change. 6 pre-set cutting depths. Anti-restart function (with warning lamp). Rotatable dust nozzle for easy connection to dust extraction.

Building on the unprecedented success of the original Festool Domino, the new Domino XL brings the ability to make much bigger and stronger joints. The patented pendulum cutting action has been scaled up to produce wider and longer joints. One of the most appealing benefits of the Domino system of joining wood is the time it saves. The ability to bring the tool to the work, rather than the work to the tool, speeds the whole process up. It's especially beneficial with the new DF 700, as it is intended...