kenwood 4 channel amplifier : 30 results priced between £50.00 and £300.00

a b c d e

Kenwood KAC-6404 4/3/2 Channel Power Amplifier

2Ch Amplifier 350 Max / High/Low Pass Filter

I was looking for an all round solution to my in car entertainment and came across the Clarion VZ409 7" screen DVD player on the website which had been reduced down to £184.00, much lower than anywhere else, so I went over to see try product at the Birmingham branch, before ordering just to confirm the amazing price.

Kenwood 4-channel (bridgeable to 3 or 2 channels) amplifier. Key Features. 4/3/2 Channel power amplifier. 720 Watts max Output Power. 2Ω Load Capability. Cooling Fan. Built-in variable low-pass filter. Built-in variable high-pass filter. Bass Boost function. Amplifier Features. Load Capability 2Ω Stable. Maximum Output Power 720W. Rated Power Output 60W x 4 (4Ω). Rated Power Output 90W x 4 (2Ω). Bridged Power Output (4Ω) 180W x 2. CEA-2006 Compliant. Low-pass Filter. High-pass Fliter...

Maximum Power Output (4Ω): 125W x 4. Rated Power Output (4Ω, 14,4V): 40W x 4 (20Hz ~ 20000Hz, 1%THD). Rated Power Output (2Ω, 14,4V): 60W x 4 (1000Hz, 1%THD). Bridged Power Output (4Ω, 14,4V): 130W x 2 (1000Hz, 1%THD). Rated Power Output (CEA-2006): 40Watts RMS x 4 at 4 ohms and 1% THD. Low-pass Filter: 50~200Hz (-12dB/oct)(B-Channel). High-pass Fliter: 80Hz (-12dB/oct). Input Sensitivity: 0.2 ~ 5V. Input Impedance: 10kΩ. Signal to Noise Ratio: 94dB. Signal To Noise Ratio (CEA-2006): 8...

Kenwood 4-channel (bridgeable to 3 or 2 channels) amplifier. Rated power (4 ohm, 20 ~ 20 kHz, 0.08%THD): 50 W x 4. Rated power (2ohm, 1kHz, 0.8%THD): 75 W x 4. Bridged power (4ohm, 1kHz, 0.8%THD): 180W x 2. Aluminium Die-cast heat-sink with Aluminium dress-plate. Power MOSFET Switching Power Supply. 2 ohm load capability. MOSFET power supply. speaker-level inputs with signal sensing turn-on. preamp-level inputs and outputs. fuse rating: 40A x 1. 8-gauge power and ground leads. Dimensions...

Class D Amplifier. Full Range Digital Amplifier. Load Capability 2? Stable. Maximum power output 1000W. Rated power output (4?) 75W x 4 (4?). Rated power output 100W x 4 (2?). Bridged power output (4?) 200W x 2. CEA-2006 Compliant. Low-pass Filter. High-pass Fliter. Dual Mono Drive Capability. Switched Mode Power supply, with Power MOS-FET. Power Indicator. Protection function. Line in 2 RCA (Gold Plated) A/B. Input Selector A/AB. Single Side Terminals. Full Contact Terminal. Gold...

14.4V Rated Output Power (4 Ohm, 20 ~ 20 kHz), 1% THD: 4 x 60 W. 14.4V Rated Output Power (2 Ohm, 1kHz), 0.8% THD: 4 x 90 W. 14.4V Bridged Output Power (4 Ohm, 1kHz), 0.8% THD: 2 x 180 W. 14.4V Maximum Output Power (4 Ohm, Bridged): 720 W (4 x 180W). Built-in Variable Low-pass Filter, B Channel: 50-200Hz (-12dB/oct). Built-in High-pass Filter, A Channel: 80Hz (-12dB/oct). Variable input sensitivity: 0.2 ~ 5 V. Frequency response: 10 ~ 50 kHz. Signal noise ratio: < 100 dB. Maximum current...

Load Capability: 2Ω Stable. Maximum Output Power: 720W. Rated Power Output: 60W x 4 (4Ω). Rated Power Output: 90W x 4 (2Ω). Bridged Power Output (4Ω): 180W x 2. CEA-2006 Compliant: Yes. Low-pass Filter: Yes. High-pass Fliter: Yes. Switched Mode Power supply: Yes, with Power MOS-FET. Cooling Fan: Yes. Power Indicator: Yes. Line in: 2 RCA (Gold Plated). Input Selector: no. Line out: no. Speaker level Input: Yes. Gold Plated Power & Speaker Terminals: Yes. Die-Cast Aluminium Heat Sink...

4-channel amplifier, bridgeable into 2 or 3 channels. 4 ohm stereo : 4 x 100 watts RMS. 2 ohm stereo : 4 x 115 watts RMS. 4 ohm mono : 2 x 225 watts RMS. Max power : 900 watts. Frequency response : 20Hz – 20KHz. THD : 0.2%. Bass boost : 0 – 12dB. Crossover Freq : 50 – 500 Hz. Subsonic filter : N/A. Remote control : Optional. Dimensions: Height : 55mm, Width : 237mm, Depth : 203mm.

4 x 250W. 2 x 500W. 1 x 500W. 2 x 250W,. Bridgeable High Power Amplifier,. MOS-FET Switching Supply,. Built in Low / High Pass X-over,. Hi / Low Level Input,. Thermal speaker Short Circuit Protection.

Maximum Power Output: 1000W. Raited Power Output (14.4V): 170W X 2 At 4ohms (20-20khz,0.08%THD) 250W X 2 At 2ohms (1khz,0.8%THD) 500W X 1 At Briged 4ohms (1khz,0.8%THD). Aluminium Die Cast Heat Sink. Power MOS-FET Switching Power Supply. Built In Variable Low Pass Filter 50-200Hz (-24dB/oct). Built In Variable High Pass Filter 50-200Hz (-12dB/oct). Bass Boost 40Hz (0-/+18dB). 2ohm Load Capability. Line Out Put Terminals (RCA). Cooling Fan. Blue Illumination. Speaker Level Input. Signal...

Package includes:. JBL GTO1004e, 4-channel amplifier (2x100W RMS + 200W RMS for sub). Kenwood KDC-W3013 12" 1200W subwoofer. 12" sub-box. Kenwood KFC-M6934A 360W 6x9 speakers. 8-gauge wiring kit. Normal RRP if purchased individually £369.99.

Maximum Power Output: 720W. Raited Power Output (14.4V): 60W X 4 At 4ohms (20-20khz,1.0%THD) 90W X 4 At 2ohms (1khz,1.0%THD) 180W X 2 At Bridged 4ohms (1khz,1.0%THD). Aluminium Die Cast Heat Sink. Power MOS-FET Switching Power Supply. Built In Variable Low Pass Filter 50-200Hz (-12dB/oct). Built In High Pass Filter 80Hz (-12dB/oct). 2ohm Load Capability. Gold Plated Power And Speaker Terminal. Cooling Fan. Speaker Level Input.

Load Capability 2? Stable. Maximum power output 1000W. Rated power output (4?) 170W x 2 (4?). Rated power output 250W x 2 (2?). Bridged power output (4?) 500W x 1. CEA-2006 Compliant. Low-pass Filter. High-pass Fliter. Bass Boost Circuit. Switched Mode Power supply, with Power MOS-FET. Cooling Fan. Power Indicator. Blue Illumination. Signal Sensing Turn-on. Protection function. Line in 1 RCA (Gold Plated). Input Selector no. Line out 1 RCA (Gold Plated). Speaker level Input. Single...

Load Capability: 2Ω Stable. Maximum Output Power: 600W. Rated Power Output: 50W x 4 (4Ω). Rated Power Output: 75W x 4 (2Ω). Bridged Power Output (4Ω): 180W x 2. CEA-2006 Compliant: Yes. Low-pass Filter: Yes. High-pass Fliter: Yes. Bass Boost Circuit: Yes. Switched Mode Power supply: Yes, with Power MOS-FET. Cooling Fan: Yes. Power Indicator: Yes. Blue Illumination: Yes. Signal Sensing Turn-on: Yes. Protection function: Yes. Line in: 2 RCA (Gold Plated). Input Selector: no. Line out...

Kenwood 2-channel (bridgeable to one channel) amplifier. Rated power (4 ohm, 20 ~ 20 kHz, 0.08%THD): 170 W x 2. Rated power (2ohm, 1kHz, 0.8%THD): 250 W x 2. Bridged power (4ohm, 1kHz, 0.8%THD): 500W. Maximum output power (4 ohm, Bridged): 1000W. Aluminium Die-cast heat-sink with Aluminium dress-plate. Power MOSFET Switching Power Supply. 2 ohm load capability. high-pass (12 dB per octave) and low-pass (24 dB per octave) filters variable from 50 to 200 Hz. variable bass boost (0-18 dB at...

4-channel POWER AMP, Bridgeable into 3 or 2 channels. Load Capability 2Ω Stable. Maximum power output: 720W. Rated power output (4Ω): 60W x 4 (4Ω). Rated power output: 90W x 4 (2Ω). Bridged power output (4Ω): 180W x 2. CEA-2006 Compliant. Low-pass Filter. High-pass Fliter. Switched Mode Power supply, with Power MOS-FET. Power Indicator. Line in: 2 RCA (Gold Plated). Speaker level Input. Die-Cast Aluminium Heat Sink. Amplifier-Specifications. Maximum power output (4Ω): 180W x 4. Rated...

FOUR Channel amplifier (can be bridged into 3 or 2 channel mode). Bass Boost @ 45Hz. Channel Seperation >50dB. Frequency Response (-3dB) 10Hz - 40kHz. Fuse Rating 40A x 2. Input Impedance 20K. Input Sensitvity 0.2V - 8V. Max Power Rating (Watts) 900. 90 Watts RMS per Channel @ 4 Ohms. 125 Watts RMS per Channel @ 2 Ohms. 230 Watts RMS Bridged @ 4 Ohms. Signal to Noise >87dB. THD @ Rated Power 1% (1kHz). Variable High Pass Filter 6dB / Octave. Variable Low Pass Filter 6dB / Octave. Variable...

600 Watts max power. 200 Watts x 1 RMS (4 ohms). 300 Watts x 1 RMS (2 ohms). Aluminium die-cast heat sink. Built-in variable low-pass filter 50 - 200Hz (12dB/oct). 2 ohm load capability. 94dB S/N ratio. Accepts line level or speaker level inputs. Power MOSFET switching power supply. Frequency response 20Hz - 200kHz. Input sensitivity 0.2 - 5.0 V. 'D' class amplification circuits throughout, using switching techniques instead of the linear methods used in Class 'A' or 'B' type amplifiers...

Class D Amplifier. Full Range Digital Amplifier. Load Capability: 2Ω Stable. Maximum Output Power: 1200W. Rated Power Output: 75W x 4 (4Ω). Rated Power Output: 100W x 4 (2Ω). Bridged Power Output (4Ω): 200W x 2. CEA-2006 Compliant. Low-pass Filter. High-pass Fliter. Infrasonic filter. Phase inverter 0?(Normal) / 180?(Reverse). Built-in Full Function DSP. Switched Mode Power supply with Power MOS-FET. Power Supply with Dual Transformer. Cooling Fan. Amplifier Information Display. ...

Two Channel (stereo), bridgeable into single channel Bass Amplifier. RMS Power @13.8V @4 ohm 2 x 260 watts / 1 x 900 watts. RMS Power @13.8V @2 ohm 2 x 450 watts. Crossover Bypass Yes. Crossover Hi-Pass 50-5kHz @12/249mono)dB. Crossover Lo-Pass B- 50-5kHz @12/24(mono)dB. THD @ 1kHz 0.04%. S/N Ratio (a weighted @1V) 100dB. Damping Factor 1khz,4ohm 120. Size: 198mm x 438mmx 56mm.

Kenwood KAC-6404 4/3/2 Channel Power Amplifier The Kenwood KAC-6404 is a versatile, affordable amplifier that is perfect for anyone who wants to upgrade their systems sound, but is on a budget. Rated at 40 watts x 4, it will bring your front and rear full range speakers to life. The Kenwood KAC-6404 amp is also versatile enough to run your whole system. You can run one pair of full range speakers off of the front channels and bridge the rear channels to run subwoofer or two in mono. Since this amp...