kicker amplifiers : 357 results priced between £25.00 and £600.00

In-Car Technology/Car Sound Systems/Car Amplifiers

In-Car Technology/Car Sound Systems/Car Amplifiers

In-Car Technology/Car Sound Systems/Car Amplifiers

Kicker 06 L7 12" Subwoofer with Box and Orion HCCA-D1200 Amplifier

Power Supply 12V. Power Consumption 3mA. Dimensions (in mm) 35 x 27 x 11. Antennae Cable Length 1m. Weight 47g. Impedance 75 Ohm. Gain 20dBi. Please note that the amplifier is compatible with Veba tuners only.

DX Series 2-Channel Class D Car Amplifier. 4 ohms: 75 watts x 2 chan. RMS. 2 ohms: 150 watts x 2 chan. RMS. Bridged 4 ohms: 300 watts x 1 chan. RMS. Total RMS power output: 300 watts x 1 chan. High efficiency MOSFET power supply. Wired Kicker 10ZXRC remote bass level control optional. LED power and protect indicators. Selectable bass boost (0 or +9 dB at 40 Hz). Mono channel operation. Preamp RCA outputs. Muting circuit cancels out unwanted noise. Balanced differential inputs for noise...

RMS Power: 500W x 1 @ 4 ohms THD at 4-Ohm RMS Power: <1 %. RMS Power: 1,000W x 1 @ 2 ohms. Height: 2-1/8", 54mm. Width: 9-5/8", 244mm. Length: 16-3/4", 425mm. Frequency Response: 25-200Hz) +0/-1dB. Input Sensitivity: High Level 250mV-10V. Low Level 125mV-5V. Signal-to-Noise Ratio: >95dB. Active Crossover: 24dB/octave. Variable 50Hz-200Hz low pass only. 24dB/octave high-pass subsonic filter fixed @ 25Hz. KICKEQ™ Boost: Variable to +18dB (ZX300.1 selectable +12dB), centered @ 40Hz. Included...

Specification:- POWER [watts], CLASS D 2 OHM MONO:     1000 REMOTE BASS INCLUDED:             yes REMOTE BASS CAPABLE:             N/A DIMENSIONS [in, cm]: [all models 2-1/4H x 8-5/16W x ... L] 10-1/4" [all models 5.7H x 21.1W x ... L] 26cm COMMON TO ALL MODELS FREQUENCY RESPONSE [Hz]:         25-200, +0/-1dB INPUT SENSITIVITY:                 high level 250mV-10V, low level 125mV-5V SIGNAL-TO-NOISE RATIO:             >95dB, a-weighted, re: rated power ACTIVE CROSSOVER:                 18dB/octave...

RMS Power @ 4 Ohms: 60W x 2 @ 14.4V. Bridged RMS Power @ 4 Ohms: 150W x 1 @ 14.4V. THD at 4-Ohm RMS Power: <1 %. Speaker Level Inputs. Preamp Outputs. HP/LP Built-In Crossovers. Bass Boost: 0-18 dB. Frequency Response: 20-20,000 Hz. Signal to Noise Ratio: 102 dB. Fuse Rating: 25 amps. Advanced chassis with extruded aluminum heatsink. MOSFET class A/B power supply. Top-mounted controls. KickBass 0-18 dB variable bass boost at 40 Hz. Variable 50-200 Hz high- or low-pass crossover with...

RMS Power: 750W x 1 @ 4 ohms THD at 4-Ohm RMS Power: <1 %. RMS Power: 1,500W x 1 @ 2 ohms. Height: 2-1/8", 54mm. Width: 9-5/8", 244mm. Length: 20", 507mm. Frequency Response: 25-200Hz) +0/-1dB. Input Sensitivity: High Level 250mV-10V. Low Level 125mV-5V. Signal-to-Noise Ratio: >95dB. Active Crossover: 24dB/octave. Variable 50Hz-200Hz low pass only. 24dB/octave high-pass subsonic filter fixed @ 25Hz. KICKEQ™ Boost: Variable to +18dB (ZX300.1 selectable +12dB), centered @ 40Hz. Included...

Specification:- POWER [watts], CLASS D 2 OHM MONO: 500 REMOTE BASS INCLUDED: yes REMOTE BASS CAPABLE: N/A DIMENSIONS [in, cm]: [all models 2-1/4H x 8-5/16W x ... L] 10-1/4" [all models 5.7H x 21.1W x ... L] 26cm COMMON TO ALL MODELS FREQUENCY RESPONSE [Hz]: 25-200, +0/-1dB INPUT SENSITIVITY: high level 250mV-10V, low level 125mV-5V SIGNAL-TO-NOISE RATIO: >95dB, a-weighted, re: rated power ACTIVE CROSSOVER: 18dB/octave, variable 50-200Hz, low pass only [DX250.1 24dB/octave, fixed @ 80Hz] SUBSONIC...

Amplifier class D. Number of channels 2. Output power in 4 ohm 2 x 180 W RMS. Output power in 2 ohm 2 x 280 W RMS. Mono bridge mode 4 ohm 550 W RMS. S/N ratio, A-weighted > 100 dB. Damping factor > 100. Frequency range 10 Hz - 35 kHz. Input impedance 33 kohm. Input impedance, high level 1 kohm. High level input with auto start 1. Low level output 1. Input sensitivity 0,3 - 6V. Phase control for subwoofers 0 - 180 degress cont. variable. High pass filter 15 - 150 Hz. Low pass filter...

FEATURESMarine certified connections Waterproof cover for crossover/gain controls Conformally coated, water resistant circuit boards Water resistant sub level control connector 2 ohm stability on all amps Hybrid (Class A/B and Class D together) multi-channel amp SPECIFICATIONS Power (watts/channel) 2 Ohm stereo 90 x 4 Power (watts/channel) 4 Ohm bridged mono 175 x 2 Class D 2 Ohm mono -- image of dimensions Dimension A (in., cm) 13-1/2, 34.2 Remote Bass Control No Frequency Response (Hz)...

RMS Power: 1250W x 1 @ 4 ohms THD at 4-Ohm RMS Power: <1 %. RMS Power: 2,500W x 1 @ 2 ohms. Height: 2-1/8", 54mm. Width: 9-5/8", 244mm. Length: 27-1/2", 697mm. Frequency Response: 25-200Hz) +0/-1dB. Input Sensitivity: High Level 250mV-10V. Low Level 125mV-5V. Signal-to-Noise Ratio: >95dB. Active Crossover: 24dB/octave. Variable 50Hz-200Hz low pass only. 24dB/octave high-pass subsonic filter fixed @ 25Hz. KICKEQ™ Boost: Variable to +18dB (ZX300.1 selectable +12dB), centered @ 40Hz. Included...

Amplifier class D. Number of channels 2. Output power in 4 ohm 2 x 120 W RMS. Output power in 2 ohm 2 x 200 W RMS. Mono bridge mode 4 ohm 400 W RMS. S/N ratio, A-weighted > 100 dB. Damping factor > 100. Frequency range 10 Hz - 35 kHz. Input impedance 33 kohm. Input impedance, high level 1 kohm. High level input with auto start 1. Low level output 1. Input sensitivity 0,3-6 V. Phase control for subwoofers 0 - 180 degrees cont. variable. High pass filter 15-150 Hz. Low pass filter 5...

Type: 4/3/2 channel. 4 ohm stereo 4 x 80 watts RMS. 2 ohm stereo 4 x 100 watts RMS. 4 ohm mono 2 x 200 watts RMS. Max Power: 800 watts. Size ( H x W x D ) 68mm x 325mm x 244mm.

RMS Power 3000 x 1. PEAK Power 6000 x 1. RMS@2Ohms 3000 x 1. Bridged RMS N/A. Min Impedance 2 Ohm. Min Impedance Bridged N/A. THD >1%. S/N 100dB. Max Voltage 15v. Max RCA Voltage 5v. Freq. Responce 8HZ-180HZ. Dimensions 38" x 8.7" x 2.6". Bass Remote Included.

Four Channel, bridgeable into 3 channels (2 stereo + 1 mono) Amplifier. RMS Power @13.8V @4 ohm 4 x 75 watts/ 2 x 260 watts. RMS Power @13.8V @4/2 ohm 2 x 75 watts + 2 x 130 watts. RMS Power @13.8V @2 ohm 4 x 130 watts. RMS Power in 3-channel mode (4 ohm): 2 x 75W + 260W mono. Crossover Bypass A-B. Crossover Hi-Pass A-50-5kHz @12dB. Crossover Hi-Pass B-50-5kHz @12dB. Crossover Lo-Pass B- 50-5kHz @12/24(mono)dB. THD @ 1kHz 0.04%. S/N Ratio (a weighted @1V) 100dB. Damping Factor 1khz,4ohm...

OUTPUT POWER (RMS) @ 14.4 VDC, THD 1%:. 3 Ch 170Wx2(4Ω)+750Wx1(4Ω). 3 Ch 160Wx2(4Ω)+1150Wx1(2Ω). 3 Ch 250Wx2(2Ω)+710Wx1(4Ω). 3 Ch 250Wx2(2Ω)+1030Wx1(2Ω). CEA 2006-A RATINGS. OUTPUT Power (4Ω, ≤1%THD+N,. 14.4 Volts): 160Wx2+650Wx1. S/N ratio (ref. 1W output):. 160 W Channels: 80 dBA. 650 W Channel: 58 dBA. Amplifier stage. Distorsion-THD(1kHz@4Ω)ACh: 0.08 %. Distorsion-THD( 100 Hz@4Ω)SubCh: 0.5 %. Bandwidth (-3 dB) A Ch: 4 ÷ 62k Hz. Bandwidth (-3 dB) Sub Ch: 7 ÷ 800 Hz. S/N Ratio(Aweighted...

RMS Power 500 x 1. PEAK Power 1000 x 1. RMS @ 2Ohms 500 x 1. Bridged RMS N/A. Min Impedance 2 Ohm. Min Impedance Bridged N/A. THD >1%. S/N 100dB. Max Voltage 15v. Max RCA Voltage 5v. Freq. Responce 8HZ-180HZ. Dimensions 9.0" x 8.7" x 2.1". Bass Remote optional.

Kicker Car Audio Amplifier. 4-channel car amplifier. 25 watts RMS x 4 at 4 ohms (50 watts RMS x 4 at 2 ohms). 100 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode). CEA-2006 compliant. Switchable high-pass filter (100 Hz 18 dB/octave). Switchable low-pass filter (80Hz 18 dB/octave). Switchable bass boost (0 9 dB at 40 Hz). Frequency response: 20-20K Hz. Preamp inputs (adapter required for speaker-level inputs). 8-gauge power and ground leads recommended — wiring and...

Amplifier Type 1 Channel (MONO). RMS Power: 1,000W x 1 @ 1 ohm. Class D Monoblock. 2000W Max Power. 1000W x 1 RMS @ 1ohm. 700W x 1 RMS @ 2ohms. 400W x 1 RMS @ 4 ohms. Frequency Response: 20Hz-250Hz. Signal to Noise: >95dB. Input Sensitivity: 200mV-6V. Variable Low Pass: 35-250Hz, 24dB/octave. Variable Bass Boost: 0-15dB @ 45Hz. Bridging/Strapping Capable. Dimensions: 365 x 53 x 238.8mm.

Amplifier Type 1 Channel (MONO). RMS Power: 2,000W x 1 @ 1 ohm. Class D Monoblock. 4000W Max Power. 2000W x 1 RMS @ 1ohm. 1400W x 1 RMS @ 2ohms. 800W x 1 RMS @ 4 ohms. Frequency Response: 20Hz-250Hz. Signal to Noise: >95dB. Input Sensitivity: 200mV-6V. Variable Low Pass: 35-250Hz, 24dB/octave. Variable Bass Boost: 0-15dB @ 45Hz. Bridging/Strapping Capable. Dimensions: 545 x 53 x 238.8mm.

Brand New Hifonics 2500 Watt MONO D Car Amplifier. RMS Power:. 850 Watt x 1 Channel @ 4 Ohm. 1700 Watt x 1 Channel @ 2 Ohm. 2500 Watt x 1 Channel @ 1 Ohm. Black Heat Sink. Illuminated Brutus Name Plate. Balanced Input for MX accessories and Line Drivers. Hifonics “Super D” TM Digital D-Class Technology. Blue “Military Grade” PCB. Bass EQ with 45 Hz Bass Boost. High Dissipation Heat Sink. Variable Low Pass, High Pass, Band Pass, Phase. Shift and Level Control. RCA Inputs and Outputs...

One in / four out video signal amplifier. Amplifies video signal to maintain picture quality in multi monitor systems. RCA composite gold-plated video input. RCA composite gold-plated video outputs. Allows connection of multiple monitor to a single video source without loss. Compact size. DC 12V Power Input.

PEAK Power 3000 x 1. RMS @ 1 Ohms 1500 x 1. RMS @ 2 Ohms 950 x 1. Bridged RMS N/A. Min Impedance 1 Ohm. Min Impedance Bridged N/A. THD >1%. S/N 100dB. Max Voltage 15v. Max RCA Voltage 5v. Freq. Responce 8HZ-180HZ. Dimensions 14.8" x 9.0" x 2.1". Bass Remote Optional.

Type: Monoblock. 4 ohm mono 1 x 200 watts RMS. 2 ohm mono 1 x 400 watts RMS. 1 ohm mono 1 x 600 watts RMS. Max Power: 1200 watts. Size ( H x W x D ) 68mm x 330mm x 244mm.

Multi-channel amplifier, capable of running 2 - 4 speakers OR, 2 speakers and 1 subwoofer. Type: 4/3/2 channel. 4 ohm stereo 4 x 140 watts RMS. 2 ohm stereo 4 x 200 watts RMS. 4 ohm mono 2 x 400 watts RMS. Max Power: 1600 watts. Size ( H x W x D ) 68mm x 445mm x 244mm.

Type: Monoblock BASS AMPLIFIER. 4 ohm mono 1 x 400 watts RMS. 2 ohm mono 1 x 800 watts RMS. 1 ohm mono 1 x 1250 watts RMS. Max Power: 2500 watts. Size ( H x W x D ) 68mm x 405mm x 244mm.

Type: 2/1 Channel. 4 ohm stereo 2 x 80 watts RMS. 2 ohm stereo 2 x 100 watts RMS. 4 ohm mono 1 x 200 watts RMS. Max Power: 400 watts. Size ( H x W x D ) 68mm x 225mm x 244mm.

Authorised Dealer for Hertz Hi-Power Range. Output Power (RMS):. 400W x 1 @4-ohm. 750W x 1 @2-ohm. 1000W x 1 @1-ohm. HP Link mode RMS Power:. 1500W x 1 (4-ohm - HP LINK). 1700W x 1 (2-ohm - HP LINK). Low Pass Filter: 25 - 250Hz @24dB/Oct (L+R). Subsonic: By-pass / 10 - 50Hz @24dB/Oct. Output Phase Selector: 0/180 Degress. EP LINK mode: Master/Slave. Bass Boost: 0-18dB @50Hz. Output Filter: Continuous 0-180 @12dB/Oct. T.H.D. (100Hz @4-ohm): 0.15%. Bandwith (-3 dB): 10 - 250Hz. S/N...

Authorised Dealer for Hertz Hi-Power Range. Output Power (RMS):. 60W x 2 @4-ohm. 90W x 2 @2-ohm. 190W x 1 @4-ohm. Low Pass Filter: 40 - 400Hz @24dB/Oct. Bass Boost: 0-12dB @45Hz. T.H.D. (100Hz @4-ohm): 0.05%. Bandwith (-3 dB): 7 - 60Hz. S/N Ratio (A weighted @1V): 100dBA. Damping Factor (100Hz @4-ohm) >130. Pre-In sensitivity: 0.3-5Volts. Pre-In impedence: 15 kohms. Speaker-In sensitivity: 1.4-24Volts. Speaker-in impendence@ 5kOhms. Load impendence: 2channel=2ohm, 1channel=4ohm. Power...

Authorised Dealer for Hertz Hi-Power Range. Output Power (RMS):. 2 Ch 220 Wx 2 (4Ω). 2 Ch 350 Wx 2 (2Ω). 1 Ch 700 Wx 1 (4Ω). Distorsion - THD( 1kHz @ 4 Ω): 0.05%. Bandwidth (-3 dB): 7 / 60k Hz. S/N Ratio (A weighted@ 1 V): 100 dB. Damping factor (1kHz @ 4 Ω): 130. Pre-In sensitivity: 0.3 / 5V. Pre-In impedance: 15kΩ. Speaker-In sensitivity: 1.4 / 24V. Speaker-In impedance: 470Ω. Remote In: 6 ÷ 15 VDC - 1 mA. Remote Out : 12 VDC - 15 mA. Full / Hi-Pass / Lo-Pass (Stereo/Mix) 40 ÷ 4...

INSTALLATION KIT FOR THE POWER CONNECTION OF A SINGLE AMPLIFIER UP TO 700W RMS. INCLUDES AUDISON FT2-550 5.5m RCA lead. 5.2 m/17 ft. translucent red Power Flow cable. ATO fuse holder whit fuse included. 1 m/3.3 ft. translucent black Power Flow ground cable. 5,2 m/17 ft. of 18 AWG blue remote turn-on cable. 1,5 m/5 ft. split loom. All required ring and fork terminals included. Cable ties, split loom and snap grommet included.