lathe chucks : 300 results priced between £5.00 and £250.00

* Steel body extends machine life while providing higher rigidity and greater wear resistance, enabling the chuck to withstand higher machining forces

High quality set of 3 soft jaws. Suitable for 3 jaw chucks. Hardened scroll. Featuring machined top jaw. Available in a range of different sizes: to fit 80mm, 100mm, 120mm, 130mm and 160mm chucks - just select the size you'd like from the drop down box above.

* Steel body extends machine life while providing higher rigidity and greater wear resistance, enabling the chuck to withstand higher machining forces

* Steel body extends machine life while providing higher rigidity and greater wear resistance, enabling the chuck to withstand higher machining forces

* Steel body extends machine life while providing higher rigidity and greater wear resistance, enabling the chuck to withstand higher machining forces

Use for concentric clamping. Made from die-cast zinc and offering 1.5 to 32mm and 12 to 65mm when reversing the jaws. The chuck has a M16 x 1 thread for fitting directly to the DB250 headstock spindle.

Drill chuck with sliding sleeve for the tailstock of the DB 250. Clamps up to 5.0mm. Is inserted on the spot of the rotating back centre. The feed movement results from sliding the complete tailstock.

Diameter 80mm , with scroll, reversible jaws and tee-handle pinion key.

750w (1hp) Quiet Induction Motor. Round Bar Toolrest Design (Compatible with the Robert Sorby range of tool rests). Easy-Operation Camlock Design. 14" Diameter Bowl Turning Capacity Over the Bed. Rotating Headstock allows for 20" Diameter Bowls. 10" Diameter x 43" Length Spindle Turning Capacity. Mechanical Variable Speed. Built in Digital RPM Speed Display. Hollow Head & Tail Stocks. Accessories Holder Included. Sturdy Floorstand with Shelf Included.

With individually adjustable jaws. Used to clamp asymmetrical pieces such as rectangles. The reversible jaws clamp from 1.5 - 35mm (inside) and from 14 - 67mm (outside). The DB250 headstock spindle of thread M16 x 1 screws directly into the chuck.

1500w (2hp) Induction Motor. DC motor with Delta branded inverter. 18" Diameter Bowl Turning Capacity. 14" Diameter x 47" Length Spindle Turning Capacity. Electronic Variable Speed. Built in Digital RPM Speed Display. Hollow Head & Tail Stocks. Forward and Reverse operation. Built in spindle indexing.

Gathers useful information about woodturning chucks and fixtures. This book is designed to help both beginners and advanced turners improve their skills and broaden ...

Details Offering a range of genuine tools, from Power Tools to Hand Tools, we are sure to cover your wants and needs. You are assured of high quality products from manufactures with over 30+ years experience. Brands we stock range from; Draper, Sealey & Silverline. We are only human and our servers are next generation geniuses, so mis-communication can happen and we may over-sell on this product. If we do, we will send you the equivalent brand, or an upgrade at no extra cost to yourselves.

Soba Lathe Chucks - Buy online at Chronos (call us or click live chat for help with Soba Lathe Chucks)

Replacement Lathe Chuck Keys - Buy online at Chronos (call us or click live chat for help with Replacement Lathe Chuck Keys)

Replacement Lathe Chuck Keys - Buy online at Chronos (call us or click live chat for help with Replacement Lathe Chuck Keys)

Replacement Lathe Chuck Keys - Buy online at Chronos (call us or click live chat for help with Replacement Lathe Chuck Keys)

Exceptionally high quality lathe chucks. Produced to DIN 6350 standard. Featuring recess for back plate mouting. Available in three different sizes - 100mm, 125mm and 160mm.

Draper-No-3-Chuck-Key-With-11- Teeth-Draper-76984-Type-3-chuc k-key-with-11-gear-teeth-suita ble-for-heavy-duty-chucks-with -8mm-approx-pilot-hole-Can-be- used-with-all-chucks-with-the- above-specification-including- machine-tool-chucks-lathes-pil lar-drills-etc-Display-packed- Draper-No-3-Chuck-Key-with-11- Teeth

This type of chuck is commonly used by specialist green woodturners on out of balance workpieces. As a general rule on a screw chuck you can turn five times the diameter of the chuck face therfore this chuck is suitable for timber 12 inch wide. An ideal chucking solution for turning goblets, egg cups and fruit etc. For use on any lathe with a 3/4 x 16tpi spindle.

One of a comprehensive range of high quality accessories for SM3002 metal working lathe.

One of a comprehensive range of high quality accessories for SM2503 mini lathe drill/milling machine.

One of a comprehensive range of high quality accessories for SM2503 mini lathe drill/milling machine. Tailstock Chuck MT1 for SM2503.

Sealey 4 Jaw Independent Chuck One of a comprehensive range of high quality accessories for SM3002 metal working lathe. 4 Jaw Independent Chuck for SM3002 & SM2503 Description: 4-Jaw Independent Chuck Applications: Lathe/Mill/Drill SM2503: Yes Lathe SM3002: Yes

Gathers useful information about woodturning chucks and fixtures. This book is designed to help both beginners and advanced turners improve their skills and broaden the range of projects they tackle at the lathe, by presenting a crafted combination of how-to advice and projects.

For drilling accurately through the centre of the workpiece on the lathe, there is no better option than a drill chuck. Designed to hold drill bits, expansive cutters, Forstner bits and other hexagonal shaft bits. They can also be used in the headstock to hold small work such as pen blanks, thanks to the precision made engineering jaws, which ensure a central grip.

A faceplate is a very flexible system for holding work to the lathe, but what a pig to set jobs square! Consider the 2 Jaw. In essence, a faceplate with a highly versatile vice attached. Each jaw is adjusted independently, allowing irregular or offset work to be accommodated securely. Unlike the 3 and 4-jaw chuck, any number of special jaw plates can be made from the suggested jig, to allow virtually any shape to be accepted. The designer even mentions melting polypropylene jaw plates around a complex...

Radius 2 - 68mm (with reversing chucks). Body of steel. Suitable for lathe PD 230/E and the dividing attachment TA 230.

Thread size: 3/4' x 16 TPI. For use with Draper Wood Lathes Stock Nos. 39042 58410 63938 71384 and other manufacturers similar machines. Display packed.Thread size: 3/4' x 16 TPI For use with Draper Wood Lathes Stock Nos. 3942 5841 639

A good general purpose drill chuck with a B16 taper in the back, equally suitable for use in pillar drills and lathes. The jaws close right down to almost nothing for use with very small drills. Available with a choice of Morse 1, 2 or 3 arbor or as just a chuck with no arbor. Maximum capacity 13mm, chuck key included.