lathe speed : 84 results priced between £100.00 and £1,500.00

Precision built metal working lathe, ideal for the workshop and switched on hobbyist. Variable speed reversible drive and powered cutting facility for right and left hand threads. No-volt switch to prevent accidental switch on with the chuck guard fitted as standard. Supplied with self-centring three jaw chuck and approved plug. Extensive range of accessories available. Carton packed.

Weight: 210.54 lbs., Manufacturer: Draper

Weight: 2.2 lbs., Manufacturer: Draper

Precision built lathe for the model engineer & discerning hobbyist

This lathe is perfect either for the starter who wants a machine that will grow with their skills, allowing them to develop without being restricted by the machines capabilities, or for the intermediate turner who is ready to upgrade their machine from some of the poorer quality cheap imports.

Make: Sealey. Model No:SM900. Supplied with:Face Plate, Live and Dead Centres, Revolving Dead Centre, Tool Rest and Wrenches. Turning Capacity - Over Bed:310mm. Turning Capacity - Over Tool Rest:210mm. Thread Size:3/4” x 16tpi. Distance Between Centres:900mm. Tailstock Taper:MT No. 1. Turning Speeds:500 - 2000rpm. Motor:450W/230V.

The headstock on this professional level lathe can be positioned anywhere along the bed and rotated to any angle so that a comfortable position can always be found for any job. The headstock, toolrest and tailstock are all made from cast iron and have cam-locking levers for fast adjustment. The lathe is connected to any standard 240volt power supply but an inverter then converts the power to 3 phase to allow a full range of speed control down to 200rpm without losing any torque from the motor. The...

Two speed bands allow maximum torque in the lower speeds. Infinitely variable from 50 - 2,000 rpm. Double vee bedway - hardened and ground. Adjustable gibs to slideways. Off set facility to tailstock. Large cross slide with two full length tee slots. Tailstock quill engraved metric and imperial. Reversible motor. Metric and imperial thread cutting. Zero/friction dials. Left hand threading facility. Thread dial indicator.

›Weight: 85 kg ALL SIP Machinery comes with a 2 year SIP Guarantee for extra peace of mind..

The CL4 uses a 3 phase motor and inverter to provide the power, this is a professional solution and used throughout the machine tool industry. The 3 phase motor provides more power and torque, especially at low speeds, the inverter converts the single phase supply into three phase and enables step less, infinite speed variation. Even those who are sceptical about the benefits of variable speed do not want give it up once they have tried it.

Make: Sealey. Model No:SM1100. Supplied with:Face Plate, Live and Dead Centres, Revolving Dead Centre, Tool Rest and Wrenches. Turning Capacity - Over Bed:370 mm. Turning Capacity - Over Tool Rest:270 mm. Thread Size:3/4” x 16tpi. Distance Between Centres:1100 mm. Tailstock Taper:MT No. 2. Turning Speed Range:500 - 2000 rpm. Motor:550W - 230V.

Dedicated feed shaft for longitudinal and cross feed. Separate leadscrew for thread cutting functions. Wide, double vee bedway - which is hardened and ground for maximum durability. Adjustable gibs to slideways. Offset facility to tailstock. Large cross slide with two full length tee slots. Tailstock quill engraved metric and imperial. Powerful 1.1kw motor which is reversible. Metric and imperial thread cutting. Reversible leadscrew for left hand threading. Power cross feed system.

Ten speed positions allowing the user to carry out various woodturning operations. Fitted with a revolving headstock suitable for large and small bowl turning which can travel along the full length of the cast iron bed. The lathe is fitted with a powerful induction motor no-volt overload safety switch and a BS approved non-rewireable 3 pin moulded plug and cable. Supplied complete with purpose-made stand tool rest four prong drive centre and revolving tailstock. Display carton.

Precision built metal working lathe, ideal for the workshop and switched on hobbyist. Variable speed reversible drive and powered cutting facility for right and left hand threads. No-volt switch to prevent accidental switch on with the chuck guard fitted as standard. Supplied with self-centring three jaw chuck and approved plug. Extensive range of accessories available. Carton packed.

Mon - Fri : 9am to 4:30pm. Sat : 9am to midday. Closed on Sundays and Bank Holidays.

The 1624-44 features an easy and positive swivel head with true 360º swivel. It can solidly lock in any position and quickly goes back into true alignment. This simple user friendly design feature is a great advantage - no more leaning over the bed and perfect for all bowl or free end turning, large or small. Rock solid stability and precision alignment ensures stable and trouble free turning.

Two speed bands allow maximum torque in the lower speeds. Infinitely variable from 0-2,500 rpm. Double vee bedway - hardened and ground. Adjustable gibs to slideways. Off set facility to tailstock. Tailstock quill engraved metric and imperial. Reversible motor. Metric and imperial thread cutting. Zero/friction dials. Fitted with taper roller bearings.

* Powerful 2 hp, direct drive variable speed motor. * High Torque Power. Instant power when you need it. * High Torque Power. Instant power when you need it. * Reversible, variable speed from 100 to 3500 rpm with digital readout. * 5 pre set speeds for instant access to desired speed. * Low speed torque (up to 1000 rpm) increased 100% giving even more control when turning large, out of balance pieces. * 24” between centres, extendable in 20” sections. * 16” capacity over the bed, 29” with...

Supplied with two axis D.R.O. Very generous capacity. Large 38mm spindle bore. Powerful motor. Dedicated feed shaft for longitudinal and cross feed. Separate leadscrew for thread cutting functions. Wide double vee bedway - hardened and ground. Adjustable gibs to slideways. Off set tailstock facility. Lever operated tailstock cam lock. Large cross slide / milling table. Tailstock quill engraved metric and imperial. Metric and imperial thread cutting.

Product Description: The Record Power DML36SH swivel head lathe is ideally suited to the ambitious beginner or more serious turner as this machine will give you that professional touch to any workpiece time after time.This DML36SH model features 4 speeds to tackle all types of woods from, soft to hard. The wood is held in by locking handles on both the banjo and tail stock for ease of use.The tubular steel bed bars, sealed for life bearings and heavy weight cast construction provide a rigid base...

Ideal for use on a workbench, this lathe has variable speeds allowing the user to carry out various woodturning operations. Fitted with a 200mm swing over bed, the lathe is fitted with a no-volt overload safety switch, cable and approved plug. Heavy duty cast iron bed. Supplied with 50mm and 150mm face plates, 175mm tool rest and 3/4" drive spur. Display packed.

''Quality workshop lathe suitable for a wide range of turning and drilling applications. Features power feed for even surface finish and thread cutting. Four-way tool post mounted on compound slide mechanism enables fast interchange of cutting tools with accurate feed. Powered by 550Watt motor through six-speed gearbox. Incorporates quiet running PTO gearbox with oil bath lubrication for power feed. Supplied with three-jaw chuck, and dead centre. Fitted with no-load voltage release switch. Meets...

550w (0.75hp) motor. 300mm maximum turning diameter. 900mm maximum turning between centres. 500 � 2000rpm spindle speed. � x 16tpi spindle thread size. Robust heavy duty cast iron lathe bed, headstock and tailstock - professional and durable. 360� swivel headstock - allows outboard turning of larger material, with 4 position lock. Easy speed change. Lockable tailstock with fine adjustment for accurate setting. Digital read-out for accurate speed display. Stand included. ...

JEWELLERY MAKING BURNISHERS. JEWELLERS DRILLS & TAPS & PINVICES. JEWELLERY TOOLS ELECTRO FORMING UNIT. JEWELLERS FILES & HANDLES. JEWELLERY MAKING FORMING TOOLS. JEWELLERS TOOLS HAMMERS & MALLETS. JEWELLERS HOLDING TOOLS. JEWELLERY MAKING WORK BENCH. JEWELLERY MAKING WIRE TOOLS. JEWELLERS MULTI TOOL KITS & DRILLING MACHINES. JEWELLERY PATTERN MAKER. JEWELLERS TOOLS PLIERS & CUTTERS. JEWELLERY EQUIPMENT POLISHING,TUMBLING & EXTRACTION. JEWELLERS RING SIZE TOOLS. JEWELLERS TOOLS SAW FRAMES...

Sealey SM1307 Mini Wood Lathe 330 mm. Variable Speed Mini Wood Lathe 330 mm. Centres. Manufactured to comply with latest CE requirements. Powered by 250 Watt. motor with no-volt load release switch which prevents re-start after the mains power has been interrupted. Cast iron construction throughout with one-piece bed. Variable speed enables lathe to be used for a variety of jobs. Fitted with a BS approved, non-rewirable 3-pin plug and cable. Ideal for bench mounting. Cast iron construction throughout...

Ideal for the first time user or as a back up unit. Maximum Turning Capacity: 1000 x 350mm. Four turning speed options to suit a variety of jobs. NVR Switch prevents re-start after the mains power has been interrupted. Powered by smooth operating 370Watt motor. Lathe bed with twin bar construction. Solid head and tail stocks. Fitted with a BS approved, non-rewirable 3 pin plug and cable. Model No. SM1308.

Bench mounting, multifunction mini drill, mill and lathe with variable speed giving flexibility to handle most materials. Features two 150W motors, one to operate the drill/mill and the other to power the lathe. The lathe cutting feed can be power driven or advanced manually. Thread cutting may also be undertaken with the optional thread cutting kit. Supplied with Metric graduated scales and all necessary tools required for setting and adjusting. Complies with Safety of Machinery (Safety) Regulations...

* Solid Cast Iron construction. * Variable speed invertor. * Solid tool rest. * Large diameter headstock spindle. * Heavy duty bearings. * The re-design incorporates a variable speed invertor drive so speed selection is simply achieved by rotating a control knob. * Safety features include a non-latching foot stop.

Specifications: Make: ZH, Model: CKG125 High-speed CNC Single Column Vertical Lathe, Year: N/A

A high-torque, permanent magnet motor with an infinitely variable speed range of 1800 to 7000 RPM. Measures only 5-3/4"W x 4-3/4"D x 5"H. Cast iron base insures stability. Sealed motor prevents dust particles from accumulating on the armature. Shafts are 8mm in diameter. Furnished with 2 tapered spindles and 2 muslin buffs. Use only with buffs that have pinhole centers. 110 volts, made in China

Electronic variable speed control allows the ideal speed to be quickly selected for jobs of any diameter. The new cam lock banjo design is even easier to use, and when coupled with the new round bar tool rest is a winning combination. The tool rest cross bar can be removed from the stem to change the length of the cross bar. Compatible with the Robert Sorby range of cross bars.

230v (13amp) supplyr. 750w (1hp) motorr. 350mm maximum turning diameter. 11000mm maximum turning between centres. Large 1200mm x 350mm capacity. 500 � 2200rpm variable speed. � x 16tpi spindle thread size. Rotating headstock for larger bowls. Digital speed display read-out. Stand included.

* Quality workshop lathe suitable for a wide range of turning and drilling applications. * Features power feed for even surface finish and thread cutting. * Four-way tool post mounted on compound slide mechanism enables fast interchange of cutting tools with accurate feed. * Powered by 550Watt motor through six-speed gearbox. * Incorporates quiet running PTO gearbox with oil bath lubrication for power feed. * Supplied with three-jaw chuck, and dead centre. * Fitted with no-load voltage release...

Description * Manufactured to comply with latest CE requirements. * Powered by 250Watt motor with no-volt load release switch which prevents re-start after the mains power has been interrupted. * Cast iron construction throughout with one-piece bed. * Variable speed enables lathe to be used for a variety of jobs. * Fitted with a BS approved, non-rewirable 3-pin plug and cable. * Ideal for bench mounting.

New 550w (3/4hp) Induction Motor. New Toolrest Design. New Easy-Operation Camlock Design. New Accessories Holder. 12" Bowl Turning Capacity. 36" Spindle Turning Capacity. Mechanical Variable Speed. Digital RPM Speed Display. Hollow Head & Tail Stocks. Rotating Headstock for 18" Bowls. Sturdy Floorstand with Shelf Included.