microphone windshield : 74 results priced between £2.00 and £150.00

Monacor PA-1242 100V 240W Power Amplifier Mono PA power amplifier 240W RMS, 100V, Switchable 400Hz high-pass filter 6dB/oct. Temperature-contr...

Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.

Monacor PA-980S 100V 480W Mono PA Amplifier Mono PA power amplifier 1x 480W RMS, 2-way tone control, Switchable low cut filter, Speaker outputs ...

Microphone wind shields reduce the wind noise or vocal breath sounds that cause rumbling sounds when singing or speaking close to the microphone. Microphone wind-shields, sometimes called pop shields or popper stoppers, are a soft foam cap or capsule that fits over the end of the microphone. The windshield (popper stopper or pop shield) absorbs some of the excess voice air pressure, and allows the vocal or instrument sound through to the microphone capsule.

WS6 - Deluxe Windshield for NTG-1 & NTG-2 Shotgun Mics

Monacor PA-1480 100V 480W Power Amplifier Mono PA power amplifier 480W RMS, 100V, Switchable 400Hz high-pass filter 6dB/oct. Temperature-contr...

Provides high wind noise rejection for the rode videomic, ntg1 & ntg2 Acoustically transparent Designed in australia

Audio Technica AT8131 windscreen for AT803aW, AT829cW, AT831aW, ATM350, PRO35

WS-100 Microphone windshield, for studio applications. Fabric covering Adjustable metal arm Clamp for stand

Airdam to reduce wind noise on mic, and help protect lower face from icy blasts. Comes complete with fixing kit, or if ordered at the same time as a helmet, will be attached for you. Innovative visor geometry ensures the airdam remains clear of your field of vision when raised.

Microphone Windshield 7mm Product Code: MIC93 Our Price £2.95 Brand: Various In Stock Microphone Windshield Black Foam 7mm Colour Black Dimensions 35 x 35 x 40 mm

The Hahnel MK200 is suitable for use with video cameras, audio recorders and digital SLR cameras. Broadcast quality electret condenser microphone. This second generation microphone features a built in peak signal indicator which shows you when the sound being recorded is too loud. This can be easily adjusted by selecting a lower dB level using the switch on the back of the microphone. The MK200 uses a new dual shock mount which helps to absorb any unwanted mechanical vibrations and handling noise...

Airdam to reduce wind noise on mic, and help protect lower face from icy blasts. Comes complete with fixing kit, or if ordered at the same time as a helmet, will be attached for you. Innovative visor geometry ensures the airdam remains clear of your field of vision when raised.

Microphone Windshield 10mm Product Code: MIC92 Our Price £2.95 Brand: Various In Stock Microphone Windshield Black Foam 10mm Colour Black Dimensions 25 x 25 x 30 mm

Microphone windshield of black foam. Long version For microphones with Ø 21-26mm Dimensions: Ø 42mm x 65mm Suitable e.g. for ECM-100, ECM-600ST

RØDE Microphones, based in Silverwater, New South Wales, Australia, is a company, established in 1967 by Henry and Astrid Freedman, that designs and manufactures microphones and related accessories. Their microphones are used in professional and project studios, sound reinforcement, video, film, and vocal performance.

Microphone windshield of black foam. For microphones with Ø 11-15mm Dimensions: Ø 30mm x 51mm Suitable e.g. for ECM-200, PAM-10

Suitable e.g. for DM-2500 and microphones of the same design

Microphone windshield of black foam. For microphones with Ø 21-26mm Dimensions: Ø 39mm x 55mm Suitable e.g. for DMG-600

Microphone windshield of black foam. For microphones with Ø 12-14mm Dimensions: Ø 20mm x 22mm Suitable e.g. for ECM-3003, ECM-3005

Microphone windshields of beige (SK) or black (SW) foam. For microphones with Ø 2-4mm Dimensions: Ø 7mm x 15mm Suitable e.g. for the HSE-200 series

Microphone windshields of beige (SK) or black (SW) foam. For microphones with Ø 2-4mm Dimensions: Ø 7mm x 15mm Suitable e.g. for the HSE-200 series

Microphone windshield, of black foam. General Information: For microphones with Ø 7-9mm Dimensions: Ø 14mm x 15mm Suitable e.g. for ECM-300L

Microphone windshield of black (SW) foam. For microphones with Ø 6-8mm Dimensions: Ø 18mm x 32mm Suitable e.g. for the HSE-100 series

Suitable e.g. for DM-2500 and microphones of the same design

Suitable e.g. for DM-2500 and microphones of the same design

Microphone windshield, of black foam. General Information: For microphones with Ø 21-26mm Dimensions: Ø 40mm x 145mm Suitable e.g. for ECM-950

" What connections are fitted to the NTG3? I use a SONY VX2000 v ideo camera which has a 3.5mm socket. I may change my camera soon, but are there adaptors for the microphone?"

Adapts DPA microdot connector to Sennheiser Evolution 100/300/500 series (G2 or G3) and Trantec S4.4 / S4.16 body pack transmitters. Ex-hire item in excellent condition.

Product Description During location shoots, all microphones can have the problem of wind noise. This wind-blocking device, with either a fur-covered or “zeppelin” microphone windscreen, works well with handheld and boom-style mics. Kit Includes: Blimp windshield with mic suspension and handle Free adapter set for boom pole Free 60 cm and 40 cm fur covers Features: Windshield System This windshield system is comprised of a large basket style windshield with screw-in type end caps and a shock mount...