monument prices : 130 results priced between £1.00 and £50.00

This power Monument 2161 plunger comes with 3 adapters which should fit most shower, bath, basin and bidet wastes just place over the waste that is blocked and pump the lever to pressurise the unit, It is also fitted with a pressure relief valve. When Pumping the MON2161 unit in situ it will build up pressure which is then activated via the trigger to blast away the blockage.

Dry Tests Pipework During and After Installation Triple scale Bar, psi and kPa ScalesSuitable for water, air, gas and petroleum oil pipes upto 4bar and for testing combi systems. Can be left on test while flooring is laid to reveal any nail damage. Test hot and cold supplies separately to ensure pipes are not crossed. Fitted with Schrader Valve and 15mm Pushfit° fitting. With rubber boot for added protection

Designed to remove an olive from copper pipe without damage to the pipe and without producing swarf. Carbo nitride carbon steel cutting blades for copper and brass olives only.NOTE do not attempt to remove stainless steel olives with this tool.Size: 22mm.

The convenient plastic display dispensers are ideal for retail sales outlets.

Designed to reliably remove an olive from 15mm copper pipe without damage to the pipe and without producing swarf. Carbo nitrided carbon steel cutting blades

Designed to remove an Olive from copper pipe without damage to the pipe and without producing swarf.

Adjustable basin wrench for use in tightening or loosening nuts in awkward positions, particularly those underneath basins or baths. The teeth on the jaws will grip uneven shapes etc. The swivelling head allows access where fixed spanners will not operate. Solid steel handle has profiled end to allow attachment of socket and extension for longer reach. Correct heat treatment of all components assures long life.Supplied with small, medium and large jaws.1/2in - 1.1/2in - 15-42mm

Really difficult access to cutting copper pipes in awkward places is overcome by using this Autocut pipe cutterWill only cut the exact size of copper pipe specified and NOT for use on stainless steel.Cuts in one direction.(Copper pipe only) Size. 22mm. Spare wheel to fit is available ( MON269).

Monument pipe cutter wheels are made from high quality, heat treated steels.Suitable for both 268 and 289 pipe slices 15mm and 22mm copper tube and MON 240C & MON 303 21mm and 28mm.Pack colour. Red. Packs are colour coded according to use.

Manufactured from a single piece of malleable iron with a tee handle D shaped end. Designed to make the removal of Manhole covers an easier operation. Made with a 4in/100mm handle and a 5in/125mm shaft. Sold in pairs.

Socket forming tools for joining two pieces of copper pipe of equal diameter together without using fittings.The loose former allows easier withdrawal of tool after use.The resulting capillary joint can be soft or hard soldered.Size. 15mm.

Socket forming tools for joining two pieces of copper pipe of equal diameter together without using fittings.The loose former allows easier withdrawal of tool after use.The resulting capillary joint can be soft or hard soldered.Size. 22mm.

Socket forming tools for joining two pieces of copper pipe of equal diameter together without using fittings.The loose former allows easier withdrawal of tool after use.The resulting capillary joint can be soft or hard soldered.28mm.

Smoke emitter pellets give off a dense white low-toxic smoke when ignited.

Mains water pressure gauge with 3/4in BSP thread fitting to taps.

Really difficult access to cutting copper pipes in awkward places is overcome by using this Autocut pipe cutterWill only cut the exact size of copper pipe specified and NOT for use on stainless steel.(Copper pipe only) Size. 28mm.

Really difficult access to cutting copper pipes in awkward places is overcome by using this Monument Autocut pipe cutter.It will only cut the exact size of copper pipe specified and is NOT for use on stainless steel.Cuts in one direction.Ratchet handles 15R and 22R will fit 15mm, 22 mm and 21 mm Monument Autocuts.

High quality holesaw with integral shank with M42 Cobalt High Speed Steel cutting blades with variable pitch teeth. Supplied with a split point HSS pilot drill which reduces skidding on convex surfaces eliminating the need for pre-punching. For use on Stainless Steel, Cast Iron, Mild and Galvanised Steel, Aluminium, Copper, Brass, Plastics and Wood. Generally No cutting fluids are required, But for Cast Iron use Parafin and for Stailless Steel use a cutting compound.Working Speeds. Mild Steel =...

High quality holesaw with integral shank with M42 Cobalt High Speed Steel cutting blades with variable pitch teeth. Supplied with a split point HSS pilot drill which reduces skidding on convex surfaces eliminating the need for pre-punching. For use on Stainless Steel, Cast Iron, Mild and Galvanised Steel, Aluminium, Copper, Brass, Plastics and Wood. Generally No cutting fluids are required, But for Cast Iron use Parafin and for Stailless Steel use a cutting compound.Working Speeds. Mild Steel =...

High quality holesaw with integral shank with M42 Cobalt High Speed Steel cutting blades with variable pitch teeth. Supplied with a split point HSS pilot drill which reduces skidding on convex surfaces eliminating the need for pre-punching. For use on Stainless Steel, Cast Iron, Mild and Galvanised Steel, Aluminium, Copper, Brass, Plastics and Wood. Generally No cutting fluids are required, But for Cast Iron use Parafin and for Stailless Steel use a cutting compound.Working Speeds. Mild Steel =...

High quality holesaw with integral shank with M42 Cobalt High Speed Steel cutting blades with variable pitch teeth. Supplied with a split point HSS pilot drill which reduces skidding on convex surfaces eliminating the need for pre-punching. For use on Stainless Steel, Cast Iron, Mild and Galvanised Steel, Aluminium, Copper, Brass, Plastics and Wood. Generally No cutting fluids are required, But for Cast Iron use Parafin and for Stailless Steel use a cutting compound.Working Speeds. Mild Steel =...

High quality holesaw with integral shank with M42 Cobalt High Speed Steel cutting blades with variable pitch teeth. Supplied with a split point HSS pilot drill which reduces skidding on convex surfaces eliminating the need for pre-punching. For use on Stainless Steel, Cast Iron, Mild and Galvanised Steel, Aluminium, Copper, Brass, Plastics and Wood. Generally No cutting fluids are required, But for Cast Iron use Parafin and for Stailless Steel use a cutting compound.Working Speeds. Mild Steel =...

High quality holesaw with integral shank with M42 Cobalt High Speed Steel cutting blades with variable pitch teeth. Supplied with a split point HSS pilot drill which reduces skidding on convex surfaces eliminating the need for pre-punching. For use on Stainless Steel, Cast Iron, Mild and Galvanised Steel, Aluminium, Copper, Brass, Plastics and Wood. Generally No cutting fluids are required, But for Cast Iron use Parafin and for Stailless Steel use a cutting compound.Working Speeds. Mild Steel =...

A Plumbers compression fitting spanner for tightening and loosening most 15mm and 22mm compression fitting nuts.

Ideal when removing 15mm or 22mm olives from copper piping without damaging the attached pipe.This puller simply utilises the compression fitting locking nut to remove the olive from the tube, instead of cutting the compressed olive.With all the major parts of the tool turned from brass this olive puller provides a quick and reliable remedy to removing most 15 and 22mm olives.

Compression nut spanner single ended drop forged 39 mm A/F to suit most 28 mm compression nuts.

Patented cut out mat for soldering copper pipes from 15 - 22mm in diameter. Reduces the risk of fire. The unique shape with overlap gives a tight and secure fit.Unlike conventional soldering mats the OMAT wraps around the pipe offering complete protection to the surrounding surfaces. The OMAT is constructed from a woven glass fabric and does not present any of the hazards associated with asbestos materials. Additionally, it is stitched all round and will resist temperatures up to 600 degree C.

Removable brass top with hole for attachment to line.

Made from tough plastics used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances.Extruded cover slides off and may be clipped over the base for standing the tool vertically during use.Hanging tab permits vertical hanging from suitable protrusions.Marked in millibars.Millibar scale adjusts for zeroing water level.Size. 300mm/12in.Capacity: 30Millibar

A 15 mm and 22 mm copper pipe bender. This machine is also capable of bending 15 mm stainless steel pipe.

Sorry I thought I left feedback already but yes it was a excellent service I had a problem with a set of micro bore benders and they sent out a direct replacement no hesitation I'm well happy thank you A+++... [more]

Without a ratchet but very effective .Pipe Cutter for cutting PVC, polythene, MDP and polyethylene pipe,HEP 20, plastic overflow pipe and rubber hoses etc.With patented blade shape for ease of cut.Maximum Pipe Size. 25mm.

Very effective pipe cutter for cutting PVC, polythene, MDP, HEP20 and plastic overflowpipe and rubber hoses etc.With patented blade shape for ease of cut and a ratchet action for ease of use.Maximum Pipe Size. 42mm

High quality tool for use by professional and DIY Plumbing Installers, heating engineers, and maintenance staff. Each tool assures a square even cut. All parts liable to wear are heat treated. The fluted handle contains a spare wheel.No.1. Capacity 4 to 28mm

High quality tool for use by professional and DIY Plumbing Installers, heating engineers, and maintenance staff. Each tool assures a square even cut. All parts liable to wear are heat treated. Fluted handle contains a spare wheel.No.2A. Capacity 12.0 to 42mm