nasa mattresses : 222 results priced between £5.00 and £300.00

Cruiser Wind Large High resolution 360 degree display of apparent Wind direction User selectable pointer style User selectable Windspeed in knots, M.P.H or K/M/H Blue backlighting Simple Operation Keypad adjustment of masthead alignment Masthead unit complete with 20 metres cable Low current consumption - 35mA @ 12V + 20mA for backlight Dimensions - 132mm x 98mm x 29mm

The Moo Moo MF5000 Mattress is made from unique upper layer of high density visco-elastic polymer gel. Originally designed for NASA missions, it is soft and pliable following the outline of your body perfectly. Moo Moo MF5000 mattress provides the best possible support to your body spine allowing your body to immediately find the best possible sleeping position. Specification 1cm of memory foam 14cm of reflex foam 15cm thickness Anti-dust mite Hypo Allergenic Double Jersey Fabric Cartoon graphics...

Wind system preferred by many boaters for it reliability and durability Supply voltage Nominal 12v DC Consumption, 50mA+ (25mA for display illumination max) Keypad adjustment of masthead alignment 7 levels of display backlighting Display case size 110 x 110mm Depth behind panel 30mm Anemometer head 210 x 140mm 5 and 20 metre Extension cables available

Consumption, 10mA + (25mA for display illumination max) 7 levels of display backlighting Complete with 5 metre cable

The true memory foam bed nuoldct even tell they were developed by nasa for astronauts you dont have to get the thin mattress for mystery.My pocket nuoldct believe the mattress for astronauts you nuoldct even tell they were developed by nasa for astronauts

40mm high digits Depth below transducer / below keel / below surface Deep and shallow alarms (audible and visual) User selectable Feet or Metres. Intelligent gain control + manual overide Selectable display rate and depth averaging rate Indicators for Depth trend and No echo High transmit power Tactile keypad Complete with weather cover and transducer Consumption 20mA + 25Ma for backlight (max)

Experience what sleep feels like in space with a mattress made from materials designed for NASA. • 10cm of Visco elastic foam • 100% memory core • Zip off dry-cleanable cover • Anti-dust mite • Orthopaedic • Available in medium and firm

Very large display Depth range 0.8 to 100 metres Shallow and deep alarms Blue backlighting Keel offset Simple Operation Compete with transducer and 7 metres of cable Low current consumption - 10mA @ 12V + 20mA for backlight Dimensions - 132mm x 98mm x 29mm

16 lines x 40 characters per screen Very high contrast display with white backlight Supply voltage nominal 12v Consumption 50mA @ 12v (100mA with backlight) Power save auto timer on backlight Spectrum screen for simple signal analysis Non volatile program and message memory

Reacts to body heat and supports body shape. Ecologically built on NASA Technology. Vacuum packed for easier transportation. Firmness Options: Regular| Firm. Fully complies with British Quality Standards.

Nasa TD 150Khz Depth Transducer

Description Dimensions Reviews Visco 4000 Platinum MattressThe Visco Therapy Memory Mattress is made from unique upper layer of high density visco-elastic polymer gel. Originally designed for NASA missions, it is soft and pliable following the outline of your body perfectly. So comfortable, the mattress provides the best possible support to your spine allowing your body to immediately find the best sleeping position, reducing tossing and turning. The extraordinary features helps blood to flow and...

Receive AIS data on your PC or AIS compatible plotter Supplied with free copy of 'Sea Clear' and a trial version of Software on Board. Windows compatible software includes a world map on which vessels are plotted. Any vessel on the screen can be selected and its AIS data displayed. Optional GPS input so the users own vessel is shown with latitude and longitude Receive ships on either the A or B AIS channels. Can be used with plotters or other compatible PC software that have an AIS input facility.

Nasa Bm2-12 Battery Monitor (12Vdc)

40mm high characters Industry standard 110mm square case Speed in Knots with 0.1 knot resolution Trip in N.Miles with 0.1 N.Mile resolution Total log up to 9999 N.Miles 20 levels of backlighting Tactile keypad Speed trend indicator Current consumption 1.5mA at 12V (10mA with backlight) Opto isolated balanced NMEA input

40mm high digits Speed (Knots/m.p.h.) Trip Distance (N.Miles / Miles) Total Distance (N.Miles / Miles) Trend indicator shows acceleration / deceleration Selectable speed averaging Tactile keypad Complete with weather cover and paddlewheel unit.

518 & 490 kHz operation 16 lines x 40 characters per screen Very high contrast display with white backlight Supply voltage nominal 12V Consumption 50mA @ 12V. (100mA with backlight) Power save auto timer on backlight Signal quality indicator and message error counter Non volatile program memory Compact display size: L-150mm, H-112mm, D-42mm Active micro antenna: H-195mm x 40mm. 7m cable

Suitable for Caravans, mobile homes, RV's, small boats and renewable power installations Simple operation Supply voltage 8 - 16 Volts DC Supply current 3 milliamps Battery capacities 5 - 600 AMP Hour Load current 100 AMPS Maximum Charge current 100 AMPS Maximum Shunt Standard 50 millivolt @ 100 AMP

Atmospheric pressure range - 850 to 1100mb (user adjustment to compensate for altitude) Pressure history Wind direction (when fitted with NMEA wind sensor) Real time clock - 12 or 24 hour format Race countdown timer 10 and 5 minutes & Stop watch with split timing Temperature - Outside (when fitted with NMEA wind sensor) & Cabin Wind speed (when fitted with NMEA wind sensor) - Maximum speed 100 knots & Wind speed history Supply voltage - 9.0 to 15.0 volts Recording time - Up to 160 hours Display size...

Signal level indicator Fully synthesised Frequency range - 30Khz - 30Mhz Modes - USB/AM/LSB Single side band - 3.8Khz wide 10 memory channels AM - 6Khz wide Audio output - 2 watts Power supply/consumption - 12 volts DC / 300mA Dimensions - Width 180mm, Height 58mm, Depth 170mm

Masthead unit sends NMEA 0183 sentences MWV and XDR to meteoman display or other equipment. Complete with 20 metres of cable.

Nasa Ser2Navant Series 2 Navtex Antenna

Supply voltage - 10 to 20 volts (For full brightness) Supply current - 200mA @ 12 volts (Typically 90% less than equivalent incandescent lamps) Night time visibility - 2 nautical miles minimum (25 degrees above and below the centerline) Waterproofness - IP65 (Water jets), IP67 (Submersion) Dimensions - 91 mm diameter x 113 mm Height (including mounting) Configuration - 360 degrees white

Supply voltage - 10 to 20 volts (For full brightness) Supply current - 200mA @ 12 volts (Typically 90% less than equivalent incandescent lamps) Night time visibility - 2 nautical miles minimum (25 degrees above and below the centerline) Waterproofness - IP65 (Water jets), IP67 (Submersion) Dimensions - 91 mm diameter x 113 mm Height (including mounting) Configuration - 112.5 degrees red, 112.5 degrees green, 135 degrees white.

Large display, back-lit for night use Simple operation Supply voltage Nominal 12v DC Consumption, 90mA, _ 10mA display illumination Fluxgate accuracy +/- 1 degree Compact display unit size 132 x 98 x 30mm Fully gimballed sensor 0-360 degrees with 1 degree resolution Nine levels of adjustable damping

Signal level indicator Fully synthesised Frequency range - 30Khz - 30Mhz Modes - USB/AM/LSB Single side band - 3.8Khz wide 10 memory channels AM - 6Khz wide Audio output - 2 watts Power supply/consumption - 12 volts DC / 300mA Dimensions - Width 180mm, Height 58mm, Depth 170mm

Signal level indicator Fully synthesised Frequency range - 30Khz - 30Mhz Modes - USB/AM/LSB Single side band - 3.8Khz wide 10 memory channels AM - 6Khz wide Audio output - 2 watts Power supply/consumption - 12 volts DC / 300mA Dimensions - Width 180mm, Height 58mm, Depth 170mm

The HL 2000 Memory Foam Mattress is made from unique upper layer of high density visco-elastic polymer gel. Originally designed for NASA missions, it is soft and pliable following the outline of your body perfectly. So comfortable, the mattress provides the best possible support to your spine allowing your body to immediately find the best sleeping position, reducing tossing and turning. The extraordinary features helps blood to flow and circulate freely, preventing the nerves and muscles from numbing...

Standard 110mm square Clipper case. High contrast LCD, backlit for night viewing. Minimum voltage visual alarm Simple operation

Nasa Clip-Cover Nasa Weather Covers For Clipper Instruments

Ranges 1, 2, 4, 8, 16 and 32 Nautical Miles Receives class A and B AIS transmissions Tracks up to 30 vessels Uses standard Marine VHF antenna 161.975 and 162.025 MHZ operation Uses standard NMEA0183 GPS input High contrast display with white backlight Supply voltage 12 - 15v DC Consumption 50mA @ 12v (100mA with backlight) Dimensions - width 150mm, Height 112mm, Depth 42mm

Consumption, 10mA+ (25mA for display illumination max) 7 levels of display backlighting Display case size 110 x 110mm Depth behind panel 30mm Complete with 5 metre cable, 'O' ring and weather cover

Nasa El-Cw Easy Light Led Luminaire - Cool White

Failsafe transponder technology Pin code identified High contrast display with white backlight Current consumption 50mA at 12V + 50mA for backlight Complete with 3 MOBi fobs and batteries Waterproof fob uses standard AAA type batteries Compact display size: 150 x 112 x 42mm Fob weight:100 grams Fob dimensions 77 x 47 x 38mm max with belt clip

Slimline case with easy-to-read extra LED display on a 4 inch dial Dual alarms for shallow and deep water Set for two difference range - 1-25m or 1-100m Supplied complete with transducer and mounting bracket Simple to operate