omnidirectional microphones : 238 results priced between £2.00 and £400.00

Power Required/Consumption: 5V 500mA (USB) 4V DC (Analogue) Polar Patterns: Cardioid, Bidirectional, Omnidirectional, Stereo Frequency Responce: 20Hz - 20kHz Weight: (microphone) 1.2 lbs/0.55 kg (stand) 2.2 lbs/1 kg Dimensions: 12 x 12.5 x 29.5 cm (extended in stand)

Transducer Type: Condenser, Pressure Gradient w/USB Digital Output Polar Patterns: Omnidirectional or Cardioid Frequency Responce: Position 1-3: 40-18 kHz

These mics are excellent in their omni-directional functionality, and also strong enough to withstand accidental dropping!!!

Genius Omni-directional multimedia microphone for internet talking or presentation. Highly sensitive condenser microphone Quality sound, especially suitable for video conferencing etc. Frequency range 50-14.000 Hz 3.5mm plug connects to sound card or fax/modem. Specifications: Omni-dirctional Output impedance: 2.2k ohm (Max) Sensitivity: -62db 4db(at 1KHz) Frequency response: 100Hz to 10Khz S/N Ratio:>40db (at 1Khz)

MICROPHONE, OMNI DIRECTIONAL, LEADED; Transducer Function:Microphone; Directivity:Omnidirectional; Frequency Response Min:50Hz; Frequency Response Max:16kHz; Supply Voltage Min:2V; Supply Voltage Max:10V; Sensitivity (dB):44dB; Output Impedance:2.2kohm; External Diameter:3mm; External Height:6mm; External Width:1.5mm; External Depth:3mm; Current Consumption:0.5mA; External Diameter:3mm

Manufacturer - Sony Corporation. Manufacturer Part Number - ECMCS3.CE7. Manufacturer Website Address - www.sony.co.uk. Brand Name - Sony. Product Model - ECM-CS3. Product Name - ECM-CS3 Microphone. Product Type - Microphone. Connectivity Technology - Wired. Cable Length - 1 m. Sound Mode - Stereo. Minimum Frequency Response - 50 Hz. Maximum Frequency Response - 15 kHz. Microphone Technology - Electret. Microphone Type - Lapel. Microphone Sensitivity - -38 dB. Host Interface - Mini...

The Audio Technica AT831B is a clip-on lavalier mic provides crisp, full-sounding voice pickup and excels as an instrument mic, especially for pickup of acoustic guitar with included AT8444 guitar adapter. It offers excellent gain before feedback and suppression of background noise. An integral 80 Hz high-pass filter provides easy switching from a flat frequency response to a low-end roll-off. It operates on battery or phantom power.

Sony ECM-77BMP (ECM77) Broadcast Quality miniature omni-directional electret condenser lavalier (tie-clip) microphone with 3.5mm mini-jack connector. Ideal upgrade for UWP series radio mics.The ECM-77 is probably the most often seen lapel microphone on TV and it is used widely in both studio production and on location. Its popularity is based on a combination of excellent sound quality, robust construction and an attractive cosmetic design. This microphone is the ECM-77BMP which is supplied with...

The ECM-77 provides a wide frequency response of 40Hz - 20kHz. The wide frequency response enables the microphone to accurately reproduce audio signal from a wide variety of sources. The ECM-77B is powered with an external 48 Volt phantom power source or AA alkaline battery. The ECM-77B is manufactured with a variety of connectors to accommodate various input devices, this version features a standard 3-pin XLR male connection.

Ideal for meetings & teleconferencing the ATR4697 is a condenser boundary microphone with an omnidirectional polar pattern. It is useful in surface-mounted applications for meetings-teleconferencing and desktop computer use. The microphones low-profile design assures minimum visibility.

Mojave MA300, Large diaphragm, vacuum tube condenser microphone, Polar Response: continuously variable from omnidirectional to figure eight, Frequency Response: 20Hz - 20kHz, ±3dB, 132 dB SPL, internal Hi-Pass Filter, internal -15dB Pad, Vacuum Tube: 5840 - pentode tube wired for triode operation, incl. power supply, shock mount, carrying case and cable from Mic to power supply

Ready for wireless systems - The ECM-44BC is compatible with the WL-800 beltpack transmitters (WRT-822 and WRT-8B). It is easy to configure the ECM-44 in an affordable wireless microphone system for use with a Camcorder or in a presentation system.

AKG CK32 Omnidirectional microphone head AKG CK32 - Omni-directional microphone head

The indicates an item has a "Get a Quote" option. If an item has a "Get a Quote" option, instead of purchasing the item at the given price, you have the option of requesting a price quote from us. This is available when you place the item in your shopping cart.

The U841A delivers exceptionally intelligible audio reproduction in a super-compact, low-profile design. Equipped with UniGuard® RFI-shielding technology, this omnidirectional condenser boundary microphone is designed for clear, highly intelligible sound reinforcement, professional recording, television and conferencing in surface-mount applications. The U841A has a 360° pickup angle and operates on battery or phantom power

Unidirectional and omnidirectional (switchable) condenser microphone. Complete with fixed 4m lead fitted with a 3.5mm jack plug and supplied with a 6.3mm adaptor. Microphone can be flat desk-top mounted or wall mounted with screws. Battery supplied. Battery - 1.5Vdc (1 x LR44). Frequency response : Omni - 100Hz - 12kHz. Frequency response : Uni - 20Hz - 16kHz. Impedance - 1k ohms. Lead length - 4.0m. Microphone : Connector - 3.5mm mono plug. Sensitivity - -65dB @ 1kHz (±3dB). Dimensions...

The DPA 4060 Miniature Microphone is a prepolarized omnidirectional Miniature Condenser Microphone with a 5.4 mm vertical diaphragm. Attention has been paid to the microphone's resistance to humidity. A double vent protection system together with water resistant materials inside the microphone make it more than difficult for moisture to cause the Miniature Microphone to fail. By changing the protection grids, the Miniature Microphones can furthermore be acoustically modified according to the placement...

Omni Directional Boundary Microphone A low profile ceiling or panel mounting boundary microphones. The omni-directional pick-up pattern is suitable for use where discrete audio surveillance is required. Its uses range from audio pick-up in induction loop systems to audio monitoring and recording in CCTV systems. Phantom Powered (9 - 52Vdc) Excellent frequency response Balanced output (XLR male connection) Omni-directional, condenser microphone Dimensions - 71 x 30mmØ Sensitivity - -76dB (±3dB) Weight...

Sorry, product specification is not available at this moment.

The Clockaudio C003E-RF is an Omni-directional button-style boundary layer condenser microphone designed for a wide range of installed audio conferencing or secruity applications. *Engineered in high quality brass *Balanced output *Simple through-table shock mounting *Finished in satin black Impedance: 200Ω Power Requirements: 9 ~ 48v Phantom Power S/N Ratio: 58dB(A) Termination: Male 3 pin XLR Weight (Gross): 0.15kg Features Type Table Top Frequency Response 20 Hz - 20 KHz Warranty...

Type: Condenser. Pick-up pattern: Omni. Frequency Response: 20 Hz - 20 kHz. Maximum Input Sound Level: 130 dB, (THD = 1 %). Sensitivity in free field, no load (1kHz): 31 mV/Pa +/- 2,5 dB. Nominal impedance: 200 Ohm (K6). Min. terminating impedance: 1000 Ohm (K6). Equivalent noise level: 15 dB. Equivalent noise level weighted as per CCIR 468-3: 27 dB. Dimensions: d 22,5 x 94 mm. Weight: 30 g.

The ME 62 is an omni-directional microphone head suitable for K6 and K6P powering modules. It can be used for reporting, discussions and interviews. The ME 62 is particularly suitable for good reproduction of ‘room’ ambience and ‘spaced omni’ stereo recording. View Full Details

The MKH 20 is usually used as a main microphone for orchestras and solo instruments, and picks up the natural acoustics of the room, though it does have a much wider range of applications as omni-directional microphones do not suffer from proximity effect'.

Model WL93 Microphones are economical omnidirectional, subminiature, lavalier, condenser microphones designed for general speech applications where a visually unobtrusive microphone is desirable. All WL93 models are supplied with a mounting block with attached tie bar, a sew-on mounting bracket, and an acoustic windscreen to minimize wind noise in outdoor applications. All WL93 models include a cable terminated with a 4-pin mini connector which connects directly to a Shure wireless body-pack transmitter...

The ECM-88B is a miniature omni-directional electret-condenser microphone ideally suited for quality-critical applications in broadcasting, theater and field production. This lavalier mic achieves high-sensitivity and has a flat-and-wide frequency response. The ECM-88B offers extremely low handling noise with unparalleled high sound quality. The ECM-88 comes with a DC-78 power supply and it has a cable length of 8.2 feet. This model is best suited for wired lav mic applications. However; with the...

SONY FV-100 OMNIDIRECTIONAL MICROPHONE DYNAMIC VOCAL MICROPHONE 9FT 8 INCH CORD UNIMATCH PLUG ADAPTER FREQUENCY RESPONSE: 100HZ-10KHZ 300 OHMS IMPEDANCE

IC, OMNIDIRECTIONAL MICROPHONE, LGA-5; S; IC, OMNIDIRECTIONAL MICROPHONE, LGA-5; Supply Voltage Range:1.65V to 3.6V; Operating Temperature Range:-40°C to +70°C; Digital IC Case Style:LGA; No. of Pins:5; Package / Case:5-LGA

The i436 is a miniature omni-directional microphone designed for use with the Apple iPhone, iPad, iPod Touch, Android or any phones, tablets and laptops with a 4-pole 3.5mm headphone and microphone socket. It offers a high-quality alternative to the internal microphones in these devices, either for recording, or as a measuring microphone. It may also be used with computer sound-cards which have powered microphone inputs.

The omnidirectional MS102plus microphone from NGS is highly sensitive and perfect for office use. It has a dual stand, allowing you to place it on your desk or on the top of your computer screen.

Title DPA 4071-BM Black Miniature Omnidirectional Microphone

Omni Directional Boundary Microphone A low profile ceiling or panel mounting boundary microphones. The omni-directional pick-up pattern is suitable for use where discrete audio surveillance is required. Its uses range from audio pick-up in induction loop systems to audio monitoring and recording in CCTV systems. Phantom Powered (9 - 52Vdc) Excellent frequency response Balanced output (XLR male connection) Omni-directional, condenser microphone Dimensions - 71 x 30mmØ Sensitivity - -76dB (±3dB) Weight...

Product Description Reviews (0 reviews) Warranty 561 Omnidirectional Gooseneck Microphone description: The Shure Model 561 is an omnidirectional, low-impedance dynamic microphone designed for use on a stand or flexible gooseneck (neither included). Its smooth frequency response is tailored for optimum speech intelligibility, making it ideal for language labs, paging applications, and base station communications. The 561 is also suitable for use as a talk-back or cuing microphone in TV, film, and...